chore(release): version packages (#8217)

* chore(release): version packages

* chore(release): version packages

* ci: deps

---------

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
Co-authored-by: shadcn <m@shadcn.com>

.changeset/config.json

@@ -7,5 +7,5 @@
   "access": "public",
   "baseBranch": "main",
   "updateInternalDependencies": "patch",
-  "ignore": ["www", "v4"]
+  "ignore": ["www", "v4", "tests"]
 }

.claude/settings.local.json

@@ -0,0 +1,9 @@
+{
+  "permissions": {
+    "allow": [
+      "Bash(npm test:*)",
+      "Bash(npm run typecheck:*)"
+    ],
+    "deny": []
+  }
+}

.github/workflows/issue-stale.yml

@@ -18,15 +18,15 @@ jobs:
           repo-token: ${{ secrets.STALE_TOKEN }}
           ascending: true
           days-before-issue-close: 7
-          days-before-issue-stale: 365 # ~2 years
+          days-before-issue-stale: 365
           days-before-pr-stale: -1
           days-before-pr-close: -1
           remove-issue-stale-when-updated: true
           stale-issue-label: "stale?"
-          exempt-issue-labels: "roadmap,next,bug"
-          stale-issue-message: "This issue has been automatically marked as stale due to one year of inactivity. It will be closed in 7 days unless there’s further input. If you believe this issue is still relevant, please leave a comment or provide updated details. Thank you."
-          close-issue-message: "This issue has been automatically closed due to one year of inactivity. If you’re still experiencing a similar problem or have additional details to share, please open a new issue following our current issue template. Your updated report helps us investigate and address concerns more efficiently. Thank you for your understanding!"
-          operations-per-run: 300 # 1 operation per 100 issues, the rest is to label/comment/close
+          exempt-issue-labels: "roadmap,next"
+          stale-issue-message: "This issue has been automatically marked as stale due to one year of inactivity. It will be closed in 7 days unless there’s further input. If you believe this issue is still relevant, please leave a comment or provide updated details. Thank you. (This is an automated message)"
+          close-issue-message: "This issue has been automatically closed due to one year of inactivity. If you’re still experiencing a similar problem or have additional details to share, please open a new issue following our current issue template. Your updated report helps us investigate and address concerns more efficiently. Thank you for your understanding! (This is an automated message)"
+          operations-per-run: 300
       - uses: actions/stale@v9
         id: pr-state
         name: "Mark stale PRs, close stale PRs"
@@ -36,10 +36,10 @@ jobs:
           days-before-issue-close: -1
           days-before-issue-stale: -1
           days-before-pr-close: 7
-          days-before-pr-stale: 365 # PRs with no activity in over 90 days will be marked as stale
+          days-before-pr-stale: 365
           remove-pr-stale-when-updated: true
-          exempt-pr-labels: "roadmap,nex,awaiting-approval,work-in-progress"
+          exempt-pr-labels: "roadmap,next,bug"
           stale-pr-label: "stale?"
-          stale-pr-message: "This PR has been automatically marked as stale due to one year of inactivity. It will be closed in 7 days unless there’s further input. If you believe this PR is still relevant, please leave a comment or provide updated details. Thank you."
-          close-pr-message: "This PR has been automatically closed due to one year of inactivity. Thank you for your understanding!"
-          operations-per-run: 300 # 1 operation per 100 issues, the rest is to label/comment/close
+          stale-pr-message: "This PR has been automatically marked as stale due to one year of inactivity. It will be closed in 7 days unless there’s further input. If you believe this PR is still relevant, please leave a comment or provide updated details. Thank you. (This is an automated message)"
+          close-pr-message: "This PR has been automatically closed due to one year of inactivity. Thank you for your understanding! (This is an automated message)"
+          operations-per-run: 300

.github/workflows/release.yml

@@ -41,7 +41,7 @@ jobs:
 
       - name: Create Version PR or Publish to NPM
         id: changesets
-        uses: changesets/action@v1.4.1
+        uses: changesets/action@v1
         with:
           commit: "chore(release): version packages"
           title: "chore(release): version packages"

.github/workflows/test.yml

@@ -8,6 +8,9 @@ jobs:
   test:
     runs-on: ubuntu-latest
     name: pnpm test
+    env:
+      NEXT_PUBLIC_APP_URL: http://localhost:4000
+      NEXT_PUBLIC_V0_URL: https://v0.dev
     steps:
       - uses: actions/checkout@v3
         with:
@@ -39,4 +42,7 @@ jobs:
       - name: Install dependencies
         run: pnpm install
 
+      - name: Build packages
+        run: pnpm build --filter=shadcn
+
       - run: pnpm test

.github/workflows/validate-registries.yml

@@ -0,0 +1,54 @@
+name: Validate Registries
+
+on:
+  pull_request:
+    paths:
+      - "apps/v4/public/r/registries.json"
+  push:
+    branches:
+      - main
+    paths:
+      - "apps/v4/public/r/registries.json"
+
+jobs:
+  validate:
+    runs-on: ubuntu-latest
+    name: pnpm validate:registries
+    permissions:
+      contents: read
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
+
+      - name: Install Node.js
+        uses: actions/setup-node@v3
+        with:
+          node-version: 20
+
+      - uses: pnpm/action-setup@v4
+        name: Install pnpm
+        id: pnpm-install
+        with:
+          version: 9.0.6
+          run_install: false
+
+      - name: Get pnpm store directory
+        id: pnpm-cache
+        run: |
+          echo "pnpm_cache_dir=$(pnpm store path)" >> $GITHUB_OUTPUT
+      - uses: actions/cache@v3
+        name: Setup pnpm cache
+        with:
+          path: ${{ steps.pnpm-cache.outputs.pnpm_cache_dir }}
+          key: ${{ runner.os }}-pnpm-store-${{ hashFiles('**/pnpm-lock.yaml') }}
+          restore-keys: |
+            ${{ runner.os }}-pnpm-store-
+      - name: Install dependencies
+        run: pnpm install
+
+      - name: Build packages
+        run: pnpm build --filter=shadcn
+
+      - name: Validate registries
+        run: pnpm --filter=v4 validate:registries

.vscode/settings.json

@@ -3,12 +3,7 @@
     { "pattern": "apps/*/" },
     { "pattern": "packages/*/" }
   ],
-  "tailwindCSS.experimental.classRegex": [
-    ["cva\\(((?:[^()]|\\([^()]*\\))*)\\)", "[\"'`]?([^\"'`]+)[\"'`]?"],
-    ["cn\\(((?:[^()]|\\([^()]*\\))*)\\)", "(?:'|\"|`)([^']*)(?:'|\"|`)"]
-    // "cva\\(([^)]*)\\)",
-    // "[\"'`]([^\"'`]*).*?[\"'`]"
-  ],
+  "tailwindCSS.classFunctions": ["cva", "cn"],
   "vitest.debugExclude": [
     "<node_internals>/**",
     "**/node_modules/**",

CONTRIBUTING.md

@@ -98,7 +98,7 @@ To run the CLI locally, you can follow the workflow:
 1. Start by running the registry (main site) to make sure the components are up to date:
 
    ```bash
-   pnpm www:dev
+   pnpm v4:dev
    ```
 
 2. Run the development script for the CLI:

apps/v4/.env.example

@@ -0,0 +1,2 @@
+NEXT_PUBLIC_V0_URL=https://v0.dev
+NEXT_PUBLIC_APP_URL=http://localhost:4000

apps/v4/.gitignore

@@ -32,6 +32,7 @@ yarn-error.log*
 
 # env files (can opt-in for committing if needed)
 .env*
+!.env.example
 
 # vercel
 .vercel

apps/v4/.prettierignore

@@ -4,3 +4,4 @@ node_modules
 build
 .contentlayer
 registry/__index__.tsx
+content/docs/components/calendar.mdx

apps/v4/app/(app)/(root)/page.tsx

@@ -15,9 +15,9 @@ import { PageNav } from "@/components/page-nav"
 import { ThemeSelector } from "@/components/theme-selector"
 import { Button } from "@/registry/new-york-v4/ui/button"
 
-const title = "Build your Component Library"
+const title = "The Foundation for your Design System"
 const description =
-  "A set of beautifully-designed, accessible components and a code distribution platform. Works with your favorite frameworks. Open Source. Open Code."
+  "A set of beautifully designed components that you can customize, extend, and build on. Start here then make it your own. Open Source. Open Code."
 
 export const dynamic = "force-static"
 export const revalidate = false
@@ -51,14 +51,14 @@ export default function IndexPage() {
     <div className="flex flex-1 flex-col">
       <PageHeader>
         <Announcement />
-        <PageHeaderHeading>{title}</PageHeaderHeading>
+        <PageHeaderHeading className="max-w-4xl">{title}</PageHeaderHeading>
         <PageHeaderDescription>{description}</PageHeaderDescription>
         <PageActions>
           <Button asChild size="sm">
             <Link href="/docs/installation">Get Started</Link>
           </Button>
           <Button asChild size="sm" variant="ghost">
-            <Link href="/blocks">Browse Blocks</Link>
+            <Link href="/docs/components">View Components</Link>
           </Button>
         </PageActions>
       </PageHeader>

apps/v4/app/(app)/charts/[type]/page.tsx

@@ -48,15 +48,23 @@ export default async function ChartPage({ params }: ChartPageProps) {
         {type.charAt(0).toUpperCase() + type.slice(1)} Charts
       </h2>
       <div className="grid flex-1 scroll-mt-20 items-stretch gap-10 md:grid-cols-2 md:gap-6 lg:grid-cols-3 xl:gap-10">
-        {chartList.map((chart) => (
-          <ChartDisplay
-            key={chart.id}
-            name={chart.id}
-            className={cn(chart.fullWidth && "md:col-span-2 lg:col-span-3")}
-          >
-            <chart.component />
-          </ChartDisplay>
-        ))}
+        {Array.from({ length: 12 }).map((_, index) => {
+          const chart = chartList[index]
+          return chart ? (
+            <ChartDisplay
+              key={chart.id}
+              name={chart.id}
+              className={cn(chart.fullWidth && "md:col-span-2 lg:col-span-3")}
+            >
+              <chart.component />
+            </ChartDisplay>
+          ) : (
+            <div
+              key={`empty-${index}`}
+              className="hidden aspect-square w-full rounded-lg border border-dashed xl:block"
+            />
+          )
+        })}
       </div>
     </div>
   )

apps/v4/app/(app)/charts/layout.tsx

@@ -47,7 +47,7 @@ export default function ChartsLayout({
   children: React.ReactNode
 }) {
   return (
-    <div>
+    <>
       <PageHeader>
         <Announcement />
         <PageHeaderHeading>{title}</PageHeaderHeading>
@@ -65,11 +65,11 @@ export default function ChartsLayout({
         <ChartsNav />
         <ThemeSelector className="mr-4 hidden md:flex" />
       </PageNav>
-      <div className="container-wrapper section-soft">
+      <div className="container-wrapper section-soft flex-1">
         <div className="container pb-6">
           <section className="theme-container">{children}</section>
         </div>
       </div>
-    </div>
+    </>
   )
 }

apps/v4/app/(app)/docs/[[...slug]]/page.tsx

@@ -1,13 +1,19 @@
 import Link from "next/link"
 import { notFound } from "next/navigation"
 import { mdxComponents } from "@/mdx-components"
-import { IconArrowLeft, IconArrowRight } from "@tabler/icons-react"
+import {
+  IconArrowLeft,
+  IconArrowRight,
+  IconArrowUpRight,
+} from "@tabler/icons-react"
 import { findNeighbour } from "fumadocs-core/server"
 
 import { source } from "@/lib/source"
 import { absoluteUrl } from "@/lib/utils"
+import { DocsCopyPage } from "@/components/docs-copy-page"
 import { DocsTableOfContents } from "@/components/docs-toc"
 import { OpenInV0Cta } from "@/components/open-in-v0-cta"
+import { Badge } from "@/registry/new-york-v4/ui/badge"
 import { Button } from "@/registry/new-york-v4/ui/button"
 
 export const revalidate = false
@@ -80,6 +86,9 @@ export default async function Page(props: {
   const MDX = doc.body
   const neighbours = await findNeighbour(source.pageTree, page.url)
 
+  // @ts-expect-error - revisit fumadocs types.
+  const links = doc.links
+
   return (
     <div
       data-slot="docs"
@@ -90,16 +99,21 @@ export default async function Page(props: {
         <div className="mx-auto flex w-full max-w-2xl min-w-0 flex-1 flex-col gap-8 px-4 py-6 text-neutral-800 md:px-0 lg:py-8 dark:text-neutral-300">
           <div className="flex flex-col gap-2">
             <div className="flex flex-col gap-2">
-              <div className="flex items-center justify-between">
+              <div className="flex items-start justify-between">
                 <h1 className="scroll-m-20 text-4xl font-semibold tracking-tight sm:text-3xl xl:text-4xl">
                   {doc.title}
                 </h1>
-                <div className="flex items-center gap-2">
+                <div className="docs-nav bg-background/80 border-border/50 fixed inset-x-0 bottom-0 isolate z-50 flex items-center gap-2 border-t px-6 py-4 backdrop-blur-sm sm:static sm:z-0 sm:border-t-0 sm:bg-transparent sm:px-0 sm:pt-1.5 sm:backdrop-blur-none">
+                  <DocsCopyPage
+                    // @ts-expect-error - revisit fumadocs types.
+                    page={doc.content}
+                    url={absoluteUrl(page.url)}
+                  />
                   {neighbours.previous && (
                     <Button
                       variant="secondary"
                       size="icon"
-                      className="extend-touch-target size-8 shadow-none md:size-7"
+                      className="extend-touch-target ml-auto size-8 shadow-none md:size-7"
                       asChild
                     >
                       <Link href={neighbours.previous.url}>
@@ -129,12 +143,30 @@ export default async function Page(props: {
                 </p>
               )}
             </div>
+            {links ? (
+              <div className="flex items-center space-x-2 pt-4">
+                {links?.doc && (
+                  <Badge asChild variant="secondary">
+                    <Link href={links.doc} target="_blank" rel="noreferrer">
+                      Docs <IconArrowUpRight />
+                    </Link>
+                  </Badge>
+                )}
+                {links?.api && (
+                  <Badge asChild variant="secondary">
+                    <Link href={links.api} target="_blank" rel="noreferrer">
+                      API Reference <IconArrowUpRight />
+                    </Link>
+                  </Badge>
+                )}
+              </div>
+            ) : null}
           </div>
           <div className="w-full flex-1 *:data-[slot=alert]:first:mt-0">
             <MDX components={mdxComponents} />
           </div>
         </div>
-        <div className="mx-auto flex h-16 w-full max-w-2xl items-center gap-2 px-4 md:px-0">
+        <div className="mx-auto hidden h-16 w-full max-w-2xl items-center gap-2 px-4 sm:flex md:px-0">
           {neighbours.previous && (
             <Button
               variant="secondary"
@@ -161,7 +193,7 @@ export default async function Page(props: {
           )}
         </div>
       </div>
-      <div className="sticky top-[calc(var(--header-height)+1px)] z-30 ml-auto hidden h-[calc(100svh-var(--header-height)-var(--footer-height))] w-72 flex-col gap-4 overflow-hidden overscroll-none pb-8 xl:flex">
+      <div className="sticky top-[calc(var(--header-height)+1px)] z-30 ml-auto hidden h-[calc(100svh-var(--footer-height)+2rem)] w-72 flex-col gap-4 overflow-hidden overscroll-none pb-8 xl:flex">
         <div className="h-(--top-spacing) shrink-0" />
         {/* @ts-expect-error - revisit fumadocs types. */}
         {doc.toc?.length ? (

apps/v4/app/(app)/docs/layout.tsx

@@ -8,8 +8,8 @@ export default function DocsLayout({
   children: React.ReactNode
 }) {
   return (
-    <div className="container-wrapper flex flex-1 flex-col">
-      <SidebarProvider className="min-h-min flex-1 items-start px-0 [--sidebar-width:220px] [--top-spacing:0] lg:grid lg:grid-cols-[var(--sidebar-width)_minmax(0,1fr)] lg:[--sidebar-width:240px] lg:[--top-spacing:calc(var(--spacing)*4)]">
+    <div className="container-wrapper flex flex-1 flex-col px-2">
+      <SidebarProvider className="3xl:fixed:container 3xl:fixed:px-3 min-h-min flex-1 items-start px-0 [--sidebar-width:220px] [--top-spacing:0] lg:grid lg:grid-cols-[var(--sidebar-width)_minmax(0,1fr)] lg:[--sidebar-width:240px] lg:[--top-spacing:calc(var(--spacing)*4)]">
         <DocsSidebar tree={source.pageTree} />
         <div className="h-full w-full">{children}</div>
       </SidebarProvider>

apps/v4/app/(app)/examples/tasks/components/data-table.tsx

@@ -75,7 +75,7 @@ export function DataTable<TData, TValue>({
   return (
     <div className="flex flex-col gap-4">
       <DataTableToolbar table={table} />
-      <div className="rounded-md border">
+      <div className="overflow-hidden rounded-md border">
         <Table>
           <TableHeader>
             {table.getHeaderGroups().map((headerGroup) => (

apps/v4/app/(app)/llm/[[...slug]]/route.ts

@@ -0,0 +1,29 @@
+import { notFound } from "next/navigation"
+import { NextResponse, type NextRequest } from "next/server"
+
+import { source } from "@/lib/source"
+
+export const revalidate = false
+
+export async function GET(
+  _req: NextRequest,
+  { params }: { params: Promise<{ slug: string[] }> }
+) {
+  const slug = (await params).slug
+  const page = source.getPage(slug)
+
+  if (!page) {
+    notFound()
+  }
+
+  // @ts-expect-error - revisit fumadocs types.
+  return new NextResponse(page.data.content, {
+    headers: {
+      "Content-Type": "text/markdown; charset=utf-8",
+    },
+  })
+}
+
+export function generateStaticParams() {
+  return source.generateParams()
+}

apps/v4/app/(app)/themes/layout.tsx

@@ -0,0 +1,64 @@
+import { Metadata } from "next"
+import Link from "next/link"
+
+import { Announcement } from "@/components/announcement"
+import {
+  PageActions,
+  PageHeader,
+  PageHeaderDescription,
+  PageHeaderHeading,
+} from "@/components/page-header"
+import { Button } from "@/registry/new-york-v4/ui/button"
+
+const title = "Pick a Color. Make it yours."
+const description =
+  "Try our hand-picked themes. Copy and paste them into your project. New theme editor coming soon."
+
+export const metadata: Metadata = {
+  title,
+  description,
+  openGraph: {
+    images: [
+      {
+        url: `/og?title=${encodeURIComponent(
+          title
+        )}&description=${encodeURIComponent(description)}`,
+      },
+    ],
+  },
+  twitter: {
+    card: "summary_large_image",
+    images: [
+      {
+        url: `/og?title=${encodeURIComponent(
+          title
+        )}&description=${encodeURIComponent(description)}`,
+      },
+    ],
+  },
+}
+
+export default function ThemesLayout({
+  children,
+}: {
+  children: React.ReactNode
+}) {
+  return (
+    <div>
+      <PageHeader>
+        <Announcement />
+        <PageHeaderHeading>{title}</PageHeaderHeading>
+        <PageHeaderDescription>{description}</PageHeaderDescription>
+        <PageActions>
+          <Button asChild size="sm">
+            <a href="#themes">Browse Themes</a>
+          </Button>
+          <Button asChild variant="ghost" size="sm">
+            <Link href="/docs/theming">Documentation</Link>
+          </Button>
+        </PageActions>
+      </PageHeader>
+      {children}
+    </div>
+  )
+}

apps/v4/app/(app)/themes/page.tsx

@@ -0,0 +1,22 @@
+import { CardsDemo } from "@/components/cards"
+import { ThemeCustomizer } from "@/components/theme-customizer"
+
+export const dynamic = "force-static"
+export const revalidate = false
+
+export default function ThemesPage() {
+  return (
+    <>
+      <div id="themes" className="container-wrapper scroll-mt-20">
+        <div className="container flex items-center justify-between gap-8 px-6 py-4 md:px-8">
+          <ThemeCustomizer />
+        </div>
+      </div>
+      <div className="container-wrapper section-soft flex flex-1 flex-col pb-6">
+        <div className="theme-container container flex flex-1 flex-col">
+          <CardsDemo />
+        </div>
+      </div>
+    </>
+  )
+}

apps/v4/app/(internal)/sink/components/calendar-demo.tsx

@@ -2,29 +2,67 @@
 
 import * as React from "react"
 import { addDays } from "date-fns"
+import { Clock2Icon } from "lucide-react"
 import { type DateRange } from "react-day-picker"
+import { es } from "react-day-picker/locale"
 
-import { Calendar } from "@/registry/new-york-v4/ui/calendar"
+import { Button } from "@/registry/new-york-v4/ui/button"
+import { Calendar, CalendarDayButton } from "@/registry/new-york-v4/ui/calendar"
+import { Card, CardContent, CardFooter } from "@/registry/new-york-v4/ui/card"
+import { Input } from "@/registry/new-york-v4/ui/input"
+import { Label } from "@/registry/new-york-v4/ui/label"
 
 export function CalendarDemo() {
-  const [date, setDate] = React.useState<Date | undefined>(new Date())
-  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({
-    from: new Date(new Date().getFullYear(), 0, 12),
-    to: addDays(new Date(new Date().getFullYear(), 0, 12), 30),
-  })
-  const [range, setRange] = React.useState<DateRange | undefined>({
-    from: new Date(new Date().getFullYear(), 0, 12),
-    to: addDays(new Date(new Date().getFullYear(), 0, 12), 50),
-  })
-
   return (
-    <div className="flex flex-col flex-wrap items-start gap-2 @md:flex-row">
+    <div className="bg-muted flex flex-1 flex-col flex-wrap justify-center gap-8 p-10 lg:flex-row">
+      <CalendarSingle />
+      <CalendarMultiple />
+      <CalendarRange />
+      <CalendarBookedDates />
+      <CalendarRangeMultipleMonths />
+      <CalendarWithTime />
+      <CalendarWithPresets />
+      <CalendarCustomDays />
+    </div>
+  )
+}
+
+function CalendarSingle() {
+  const [date, setDate] = React.useState<Date | undefined>(
+    new Date(new Date().getFullYear(), new Date().getMonth(), 12)
+  )
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">Single Selection</div>
       <Calendar
         mode="single"
         selected={date}
         onSelect={setDate}
-        className="rounded-md border shadow-sm"
+        className="rounded-lg border shadow-sm"
+        captionLayout="dropdown"
       />
+    </div>
+  )
+}
+
+function CalendarMultiple() {
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">Multiple Selection</div>
+      <Calendar mode="multiple" className="rounded-lg border shadow-sm" />
+    </div>
+  )
+}
+
+function CalendarRange() {
+  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({
+    from: new Date(new Date().getFullYear(), 0, 12),
+    to: addDays(new Date(new Date().getFullYear(), 0, 12), 30),
+  })
+
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">Range Selection</div>
       <Calendar
         mode="range"
         defaultMonth={dateRange?.from}
@@ -32,16 +70,207 @@ export function CalendarDemo() {
         onSelect={setDateRange}
         numberOfMonths={2}
         disabled={(date) => date > new Date() || date < new Date("1900-01-01")}
-        className="rounded-md border shadow-sm"
+        className="rounded-lg border shadow-sm"
       />
+    </div>
+  )
+}
+
+function CalendarRangeMultipleMonths() {
+  const [range, setRange] = React.useState<DateRange | undefined>({
+    from: new Date(new Date().getFullYear(), 3, 12),
+    to: addDays(new Date(new Date().getFullYear(), 3, 12), 60),
+  })
+
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">Range Selection + Locale</div>
       <Calendar
         mode="range"
         defaultMonth={range?.from}
         selected={range}
         onSelect={setRange}
         numberOfMonths={3}
-        className="hidden rounded-md border shadow-sm @4xl:flex [&>div]:gap-5"
+        locale={es}
+        fixedWeeks
+        className="rounded-lg border shadow-sm"
       />
     </div>
   )
 }
+
+function CalendarBookedDates() {
+  const [date, setDate] = React.useState<Date | undefined>(
+    new Date(new Date().getFullYear(), 1, 3)
+  )
+  const bookedDates = Array.from(
+    { length: 15 },
+    (_, i) => new Date(new Date().getFullYear(), new Date().getMonth(), 12 + i)
+  )
+
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">With booked dates</div>
+      <Calendar
+        mode="single"
+        defaultMonth={date}
+        selected={date}
+        onSelect={setDate}
+        disabled={bookedDates}
+        modifiers={{
+          booked: bookedDates,
+        }}
+        modifiersClassNames={{
+          booked: "[&>button]:line-through opacity-100",
+        }}
+        className="rounded-lg border shadow-sm"
+      />
+    </div>
+  )
+}
+
+function CalendarWithTime() {
+  const [date, setDate] = React.useState<Date | undefined>(
+    new Date(new Date().getFullYear(), new Date().getMonth(), 12)
+  )
+
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">With Time Input</div>
+      <Card className="w-fit py-4">
+        <CardContent className="px-4">
+          <Calendar
+            mode="single"
+            selected={date}
+            onSelect={setDate}
+            className="p-0"
+          />
+        </CardContent>
+        <CardFooter className="flex flex-col gap-3 border-t px-4 pt-4">
+          <div className="flex w-full flex-col gap-2">
+            <Label htmlFor="time-from">Start Time</Label>
+            <div className="relative flex w-full items-center gap-2">
+              <Clock2Icon className="text-muted-foreground pointer-events-none absolute left-2.5 size-4 select-none" />
+              <Input
+                id="time-from"
+                type="time"
+                step="1"
+                defaultValue="10:30:00"
+                className="appearance-none pl-8 [&::-webkit-calendar-picker-indicator]:hidden [&::-webkit-calendar-picker-indicator]:appearance-none"
+              />
+            </div>
+          </div>
+          <div className="flex w-full flex-col gap-2">
+            <Label htmlFor="time-to">End Time</Label>
+            <div className="relative flex w-full items-center gap-2">
+              <Clock2Icon className="text-muted-foreground pointer-events-none absolute left-2.5 size-4 select-none" />
+              <Input
+                id="time-to"
+                type="time"
+                step="1"
+                defaultValue="12:30:00"
+                className="appearance-none pl-8 [&::-webkit-calendar-picker-indicator]:hidden [&::-webkit-calendar-picker-indicator]:appearance-none"
+              />
+            </div>
+          </div>
+        </CardFooter>
+      </Card>
+    </div>
+  )
+}
+
+function CalendarCustomDays() {
+  const [range, setRange] = React.useState<DateRange | undefined>({
+    from: new Date(new Date().getFullYear(), 11, 8),
+    to: addDays(new Date(new Date().getFullYear(), 11, 8), 10),
+  })
+
+  return (
+    <div className="flex flex-col gap-3">
+      <div className="px-2 text-center text-sm">
+        With Custom Days and Formatters
+      </div>
+      <Calendar
+        mode="range"
+        defaultMonth={range?.from}
+        selected={range}
+        onSelect={setRange}
+        numberOfMonths={1}
+        captionLayout="dropdown"
+        className="rounded-lg border shadow-sm [--cell-size:--spacing(12)]"
+        formatters={{
+          formatMonthDropdown: (date) => {
+            return date.toLocaleString("default", { month: "long" })
+          },
+        }}
+        components={{
+          DayButton: ({ children, modifiers, day, ...props }) => {
+            const isWeekend = day.date.getDay() === 0 || day.date.getDay() === 6
+
+            return (
+              <CalendarDayButton day={day} modifiers={modifiers} {...props}>
+                {children}
+                {!modifiers.outside && (
+                  <span>{isWeekend ? "$120" : "$100"}</span>
+                )}
+              </CalendarDayButton>
+            )
+          },
+        }}
+      />
+    </div>
+  )
+}
+
+function CalendarWithPresets() {
+  const [date, setDate] = React.useState<Date | undefined>(
+    new Date(new Date().getFullYear(), 1, 12)
+  )
+  const [currentMonth, setCurrentMonth] = React.useState<Date>(
+    new Date(new Date().getFullYear(), new Date().getMonth(), 1)
+  )
+
+  return (
+    <div className="flex max-w-[300px] flex-col gap-3">
+      <div className="px-2 text-center text-sm">With Presets</div>
+      <Card className="w-fit py-4">
+        <CardContent className="px-4">
+          <Calendar
+            mode="single"
+            selected={date}
+            onSelect={setDate}
+            month={currentMonth}
+            onMonthChange={setCurrentMonth}
+            fixedWeeks
+            className="p-0 [--cell-size:--spacing(9.5)]"
+          />
+        </CardContent>
+        <CardFooter className="flex flex-wrap gap-2 border-t px-4 pt-4">
+          {[
+            { label: "Today", value: 0 },
+            { label: "Tomorrow", value: 1 },
+            { label: "In 3 days", value: 3 },
+            { label: "In a week", value: 7 },
+            { label: "In 2 weeks", value: 14 },
+          ].map((preset) => (
+            <Button
+              key={preset.value}
+              variant="outline"
+              size="sm"
+              className="flex-1"
+              onClick={() => {
+                const newDate = addDays(new Date(), preset.value)
+                setDate(newDate)
+                setCurrentMonth(
+                  new Date(newDate.getFullYear(), newDate.getMonth(), 1)
+                )
+              }}
+            >
+              {preset.label}
+            </Button>
+          ))}
+        </CardFooter>
+      </Card>
+    </div>
+  )
+}

apps/v4/app/(internal)/sink/components/date-picker-demo.tsx

@@ -6,8 +6,17 @@ import { CalendarIcon } from "lucide-react"
 import { DateRange } from "react-day-picker"
 
 import { cn } from "@/lib/utils"
+import { useIsMobile } from "@/hooks/use-mobile"
 import { Button } from "@/registry/new-york-v4/ui/button"
 import { Calendar } from "@/registry/new-york-v4/ui/calendar"
+import {
+  Drawer,
+  DrawerContent,
+  DrawerDescription,
+  DrawerHeader,
+  DrawerTitle,
+  DrawerTrigger,
+} from "@/registry/new-york-v4/ui/drawer"
 import {
   Popover,
   PopoverContent,
@@ -18,6 +27,7 @@ export function DatePickerDemo() {
   return (
     <div className="flex flex-col items-start gap-4 md:flex-row">
       <DatePickerSimple />
+      <DataPickerWithDropdowns />
       <DatePickerWithRange />
     </div>
   )
@@ -41,12 +51,7 @@ function DatePickerSimple() {
         </Button>
       </PopoverTrigger>
       <PopoverContent className="w-auto p-0" align="start">
-        <Calendar
-          mode="single"
-          selected={date}
-          onSelect={setDate}
-          initialFocus
-        />
+        <Calendar mode="single" selected={date} onSelect={setDate} />
       </PopoverContent>
     </Popover>
   )
@@ -86,7 +91,6 @@ function DatePickerWithRange() {
       </PopoverTrigger>
       <PopoverContent className="w-auto p-0" align="start">
         <Calendar
-          initialFocus
           mode="range"
           defaultMonth={date?.from}
           selected={date}
@@ -97,3 +101,79 @@ function DatePickerWithRange() {
     </Popover>
   )
 }
+
+function DataPickerWithDropdowns() {
+  const [date, setDate] = React.useState<Date>()
+  const [open, setOpen] = React.useState(false)
+  const isMobile = useIsMobile(450)
+
+  if (isMobile) {
+    return (
+      <Drawer open={open} onOpenChange={setOpen}>
+        <DrawerTrigger asChild>
+          <Button
+            variant="outline"
+            className={cn(
+              "min-w-[200px] justify-start px-2 font-normal",
+              !date && "text-muted-foreground"
+            )}
+          >
+            {date ? format(date, "PPP") : <span>Pick a date</span>}
+            <CalendarIcon className="text-muted-foreground ml-auto" />
+          </Button>
+        </DrawerTrigger>
+        <DrawerContent>
+          <DrawerHeader className="sr-only">
+            <DrawerTitle>Select a date</DrawerTitle>
+            <DrawerDescription>
+              Pick a date for your appointment.
+            </DrawerDescription>
+          </DrawerHeader>
+          <Calendar
+            mode="single"
+            selected={date}
+            onSelect={(day) => {
+              setDate(day)
+              setOpen(false)
+            }}
+          />
+        </DrawerContent>
+      </Drawer>
+    )
+  }
+
+  return (
+    <Popover open={open} onOpenChange={setOpen}>
+      <PopoverTrigger asChild>
+        <Button
+          variant="outline"
+          className={cn(
+            "min-w-[200px] justify-start px-2 font-normal",
+            !date && "text-muted-foreground"
+          )}
+        >
+          {date ? format(date, "PPP") : <span>Pick a date</span>}
+          <CalendarIcon className="text-muted-foreground ml-auto" />
+        </Button>
+      </PopoverTrigger>
+      <PopoverContent className="w-auto p-0" align="start">
+        <Calendar
+          mode="single"
+          selected={date}
+          onSelect={setDate}
+          captionLayout="dropdown"
+        />
+        <div className="flex gap-2 border-t p-2">
+          <Button
+            variant="outline"
+            size="sm"
+            className="w-full"
+            onClick={() => setOpen(false)}
+          >
+            Done
+          </Button>
+        </div>
+      </PopoverContent>
+    </Popover>
+  )
+}

apps/v4/app/(view)/view/[name]/page.tsx

@@ -1,7 +1,7 @@
 import * as React from "react"
 import { Metadata } from "next"
 import { notFound } from "next/navigation"
-import { registryItemSchema } from "shadcn/registry"
+import { registryItemSchema } from "shadcn/schema"
 import { z } from "zod"
 
 import { siteConfig } from "@/lib/config"
@@ -34,7 +34,7 @@ export async function generateMetadata({
   const description = item.description
 
   return {
-    title: `${item.name}${item.description ? ` - ${item.description}` : ""}`,
+    title: item.description,
     description,
     openGraph: {
       title,

apps/v4/app/layout.tsx

@@ -1,9 +1,9 @@
 import type { Metadata } from "next"
-import { cookies } from "next/headers"
 
 import { META_THEME_COLORS, siteConfig } from "@/lib/config"
 import { fontVariables } from "@/lib/fonts"
 import { cn } from "@/lib/utils"
+import { LayoutProvider } from "@/hooks/use-layout"
 import { ActiveThemeProvider } from "@/components/active-theme"
 import { Analytics } from "@/components/analytics"
 import { TailwindIndicator } from "@/components/tailwind-indicator"
@@ -58,14 +58,11 @@ export const metadata: Metadata = {
   manifest: `${siteConfig.url}/site.webmanifest`,
 }
 
-export default async function RootLayout({
+export default function RootLayout({
   children,
 }: Readonly<{
   children: React.ReactNode
 }>) {
-  const cookieStore = await cookies()
-  const activeThemeValue = cookieStore.get("active_theme")?.value
-
   return (
     <html lang="en" suppressHydrationWarning>
       <head>
@@ -76,6 +73,9 @@ export default async function RootLayout({
                 if (localStorage.theme === 'dark' || ((!('theme' in localStorage) || localStorage.theme === 'system') && window.matchMedia('(prefers-color-scheme: dark)').matches)) {
                   document.querySelector('meta[name="theme-color"]').setAttribute('content', '${META_THEME_COLORS.dark}')
                 }
+                if (localStorage.layout) {
+                  document.documentElement.classList.add('layout-' + localStorage.layout)
+                }
               } catch (_) {}
             `,
           }}
@@ -84,18 +84,19 @@ export default async function RootLayout({
       </head>
       <body
         className={cn(
-          "text-foreground group/body overscroll-none font-sans antialiased [--footer-height:calc(var(--spacing)*14)] [--header-height:calc(var(--spacing)*14)]",
-          activeThemeValue ? `theme-${activeThemeValue}` : "",
+          "text-foreground group/body overscroll-none font-sans antialiased [--footer-height:calc(var(--spacing)*14)] [--header-height:calc(var(--spacing)*14)] xl:[--footer-height:calc(var(--spacing)*24)]",
           fontVariables
         )}
       >
         <ThemeProvider>
-          <ActiveThemeProvider initialTheme={activeThemeValue}>
-            {children}
-            <TailwindIndicator />
-            <Toaster position="top-center" />
-            <Analytics />
-          </ActiveThemeProvider>
+          <LayoutProvider>
+            <ActiveThemeProvider>
+              {children}
+              <TailwindIndicator />
+              <Toaster position="top-center" />
+              <Analytics />
+            </ActiveThemeProvider>
+          </LayoutProvider>
         </ThemeProvider>
       </body>
     </html>

apps/v4/components/active-theme.tsx

@@ -8,15 +8,8 @@ import {
   useState,
 } from "react"
 
-const COOKIE_NAME = "active_theme"
 const DEFAULT_THEME = "default"
 
-function setThemeCookie(theme: string) {
-  if (typeof window === "undefined") return
-
-  document.cookie = `${COOKIE_NAME}=${theme}; path=/; max-age=31536000; SameSite=Lax; ${window.location.protocol === "https:" ? "Secure;" : ""}`
-}
-
 type ThemeContextType = {
   activeTheme: string
   setActiveTheme: (theme: string) => void
@@ -36,8 +29,6 @@ export function ActiveThemeProvider({
   )
 
   useEffect(() => {
-    setThemeCookie(activeTheme)
-
     Array.from(document.body.classList)
       .filter((className) => className.startsWith("theme-"))
       .forEach((className) => {

apps/v4/components/announcement.tsx

@@ -1,3 +1,14 @@
+import Link from "next/link"
+import { ArrowRightIcon } from "lucide-react"
+
+import { Badge } from "@/registry/new-york-v4/ui/badge"
+
 export function Announcement() {
-  return null
+  return (
+    <Badge asChild variant="secondary" className="rounded-full">
+      <Link href="/docs/changelog">
+        Now available: shadcn CLI 3.0 and MCP Server <ArrowRightIcon />
+      </Link>
+    </Badge>
+  )
 }

apps/v4/components/block-display.tsx

@@ -1,5 +1,5 @@
 import * as React from "react"
-import { registryItemFileSchema } from "shadcn/registry"
+import { registryItemFileSchema } from "shadcn/schema"
 import { z } from "zod"
 
 import { highlightCode } from "@/lib/highlight-code"
@@ -7,7 +7,9 @@ import {
   createFileTreeForRegistryItemFiles,
   getRegistryItem,
 } from "@/lib/registry"
+import { cn } from "@/lib/utils"
 import { BlockViewer } from "@/components/block-viewer"
+import { ComponentPreview } from "@/components/component-preview"
 
 export async function BlockDisplay({ name }: { name: string }) {
   const item = await getCachedRegistryItem(name)
@@ -22,7 +24,16 @@ export async function BlockDisplay({ name }: { name: string }) {
   ])
 
   return (
-    <BlockViewer item={item} tree={tree} highlightedFiles={highlightedFiles} />
+    <BlockViewer item={item} tree={tree} highlightedFiles={highlightedFiles}>
+      <ComponentPreview
+        name={item.name}
+        hideCode
+        className={cn(
+          "my-0 **:[.preview]:h-auto **:[.preview]:p-4 **:[.preview>.p-6]:p-0",
+          item.meta?.containerClassName
+        )}
+      />
+    </BlockViewer>
   )
 }
 

apps/v4/components/block-viewer.tsx

@@ -11,16 +11,18 @@ import {
   Folder,
   Fullscreen,
   Monitor,
+  RotateCw,
   Smartphone,
   Tablet,
   Terminal,
 } from "lucide-react"
 import { ImperativePanelHandle } from "react-resizable-panels"
-import { registryItemFileSchema, registryItemSchema } from "shadcn/registry"
+import { registryItemFileSchema, registryItemSchema } from "shadcn/schema"
 import { z } from "zod"
 
 import { trackEvent } from "@/lib/events"
 import { createFileTreeForRegistryItemFiles, FileTree } from "@/lib/registry"
+import { cn } from "@/lib/utils"
 import { useCopyToClipboard } from "@/hooks/use-copy-to-clipboard"
 import { getIconForLanguageExtension } from "@/components/icons"
 import { OpenInV0Button } from "@/components/open-in-v0-button"
@@ -66,6 +68,8 @@ type BlockViewerContext = {
         highlightedContent: string
       })[]
     | null
+  iframeKey?: number
+  setIframeKey?: React.Dispatch<React.SetStateAction<number>>
 }
 
 const BlockViewerContext = React.createContext<BlockViewerContext | null>(null)
@@ -91,6 +95,7 @@ function BlockViewerProvider({
     BlockViewerContext["activeFile"]
   >(highlightedFiles?.[0].target ?? null)
   const resizablePanelRef = React.useRef<ImperativePanelHandle>(null)
+  const [iframeKey, setIframeKey] = React.useState(0)
 
   return (
     <BlockViewerContext.Provider
@@ -103,12 +108,14 @@ function BlockViewerProvider({
         setActiveFile,
         tree,
         highlightedFiles,
+        iframeKey,
+        setIframeKey,
       }}
     >
       <div
         id={item.name}
         data-view={view}
-        className="group/block-view-wrapper flex min-w-0 flex-col-reverse items-stretch gap-4 overflow-hidden md:flex-col"
+        className="group/block-view-wrapper flex min-w-0 scroll-mt-24 flex-col-reverse items-stretch gap-4 overflow-hidden md:flex-col"
         style={
           {
             "--height": item.meta?.iframeHeight ?? "930px",
@@ -122,30 +129,30 @@ function BlockViewerProvider({
 }
 
 function BlockViewerToolbar() {
-  const { setView, view, item, resizablePanelRef } = useBlockViewer()
+  const { setView, view, item, resizablePanelRef, setIframeKey } =
+    useBlockViewer()
   const { copyToClipboard, isCopied } = useCopyToClipboard()
 
   return (
-    <div className="flex w-full items-center gap-2 pl-2 md:pr-[14px]">
+    <div className="hidden w-full items-center gap-2 pl-2 md:pr-6 lg:flex">
       <Tabs
         value={view}
         onValueChange={(value) => setView(value as "preview" | "code")}
-        className="hidden lg:flex"
       >
         <TabsList className="grid h-8 grid-cols-2 items-center rounded-md p-1 *:data-[slot=tabs-trigger]:h-6 *:data-[slot=tabs-trigger]:rounded-sm *:data-[slot=tabs-trigger]:px-2 *:data-[slot=tabs-trigger]:text-xs">
           <TabsTrigger value="preview">Preview</TabsTrigger>
           <TabsTrigger value="code">Code</TabsTrigger>
         </TabsList>
       </Tabs>
-      <Separator orientation="vertical" className="mx-2 hidden !h-4 lg:flex" />
+      <Separator orientation="vertical" className="mx-2 !h-4" />
       <a
         href={`#${item.name}`}
         className="flex-1 text-center text-sm font-medium underline-offset-2 hover:underline md:flex-auto md:text-left"
       >
-        {item.description}
+        {item.description?.replace(/\.$/, "")}
       </a>
-      <div className="ml-auto hidden items-center gap-2 md:flex">
-        <div className="hidden h-8 items-center gap-1.5 rounded-md border p-1 shadow-none lg:flex">
+      <div className="ml-auto flex items-center gap-2">
+        <div className="h-8 items-center gap-1.5 rounded-md border p-1 shadow-none">
           <ToggleGroup
             type="single"
             defaultValue="100"
@@ -179,15 +186,27 @@ function BlockViewerToolbar() {
                 <Fullscreen />
               </Link>
             </Button>
+            <Separator orientation="vertical" className="!h-4" />
+            <Button
+              size="icon"
+              variant="ghost"
+              className="size-6 rounded-sm p-0"
+              title="Refresh Preview"
+              onClick={() => {
+                if (setIframeKey) {
+                  setIframeKey((k) => k + 1)
+                }
+              }}
+            >
+              <RotateCw />
+              <span className="sr-only">Refresh Preview</span>
+            </Button>
           </ToggleGroup>
         </div>
-        <Separator
-          orientation="vertical"
-          className="mx-1 hidden !h-4 lg:flex"
-        />
+        <Separator orientation="vertical" className="mx-1 !h-4" />
         <Button
           variant="outline"
-          className="hidden w-fit gap-1 px-2 shadow-none md:flex"
+          className="w-fit gap-1 px-2 shadow-none"
           size="sm"
           onClick={() => {
             copyToClipboard(`npx shadcn@latest add ${item.name}`)
@@ -196,50 +215,48 @@ function BlockViewerToolbar() {
           {isCopied ? <Check /> : <Terminal />}
           <span>npx shadcn add {item.name}</span>
         </Button>
-        <Separator
-          orientation="vertical"
-          className="mx-1 hidden !h-4 xl:flex"
-        />
+        <Separator orientation="vertical" className="mx-1 !h-4" />
         <OpenInV0Button name={item.name} />
       </div>
     </div>
   )
 }
 
-function BlockViewerView() {
-  const { item, resizablePanelRef } = useBlockViewer()
+function BlockViewerIframe({ className }: { className?: string }) {
+  const { item, iframeKey } = useBlockViewer()
 
   return (
-    <div className="group-data-[view=code]/block-view-wrapper:hidden md:h-[calc(var(--height)+10px)]">
-      <div className="grid w-full gap-4">
-        <ResizablePanelGroup direction="horizontal" className="relative z-10">
+    <iframe
+      key={iframeKey}
+      src={`/view/${item.name}`}
+      height={item.meta?.iframeHeight ?? 930}
+      loading="lazy"
+      className={cn(
+        "bg-background no-scrollbar relative z-20 w-full",
+        className
+      )}
+    />
+  )
+}
+
+function BlockViewerView() {
+  const { resizablePanelRef } = useBlockViewer()
+
+  return (
+    <div className="hidden group-data-[view=code]/block-view-wrapper:hidden md:h-(--height) lg:flex">
+      <div className="relative grid w-full gap-4">
+        <div className="absolute inset-0 right-4 [background-image:radial-gradient(#d4d4d4_1px,transparent_1px)] [background-size:20px_20px] dark:[background-image:radial-gradient(#404040_1px,transparent_1px)]"></div>
+        <ResizablePanelGroup
+          direction="horizontal"
+          className="after:bg-surface/50 relative z-10 after:absolute after:inset-0 after:right-3 after:z-0 after:rounded-xl"
+        >
           <ResizablePanel
             ref={resizablePanelRef}
             className="bg-background relative aspect-[4/2.5] overflow-hidden rounded-lg border md:aspect-auto md:rounded-xl"
             defaultSize={100}
             minSize={30}
           >
-            <Image
-              src={`/r/styles/new-york-v4/${item.name}-light.png`}
-              alt={item.name}
-              data-block={item.name}
-              width={1440}
-              height={900}
-              className="object-cover md:hidden dark:hidden md:dark:hidden"
-            />
-            <Image
-              src={`/r/styles/new-york-v4/${item.name}-dark.png`}
-              alt={item.name}
-              data-block={item.name}
-              width={1440}
-              height={900}
-              className="hidden object-cover md:hidden dark:block md:dark:hidden"
-            />
-            <iframe
-              src={`/view/${item.name}`}
-              height={item.meta?.iframeHeight ?? 930}
-              className="bg-background no-scrollbar relative z-20 hidden w-full md:block"
-            />
+            <BlockViewerIframe />
           </ResizablePanel>
           <ResizableHandle className="after:bg-border relative hidden w-3 bg-transparent p-0 after:absolute after:top-1/2 after:right-0 after:h-8 after:w-[6px] after:translate-x-[-1px] after:-translate-y-1/2 after:rounded-full after:transition-all after:hover:h-10 md:block" />
           <ResizablePanel defaultSize={0} minSize={0} />
@@ -249,6 +266,45 @@ function BlockViewerView() {
   )
 }
 
+function BlockViewerMobile({ children }: { children: React.ReactNode }) {
+  const { item } = useBlockViewer()
+
+  return (
+    <div className="flex flex-col gap-2 lg:hidden">
+      <div className="flex items-center gap-2 px-2">
+        <div className="line-clamp-1 text-sm font-medium">
+          {item.description}
+        </div>
+        <div className="text-muted-foreground ml-auto shrink-0 font-mono text-xs">
+          {item.name}
+        </div>
+      </div>
+      {item.meta?.mobile === "component" ? (
+        children
+      ) : (
+        <div className="overflow-hidden rounded-xl border">
+          <Image
+            src={`/r/styles/new-york-v4/${item.name}-light.png`}
+            alt={item.name}
+            data-block={item.name}
+            width={1440}
+            height={900}
+            className="object-cover dark:hidden"
+          />
+          <Image
+            src={`/r/styles/new-york-v4/${item.name}-dark.png`}
+            alt={item.name}
+            data-block={item.name}
+            width={1440}
+            height={900}
+            className="hidden object-cover dark:block"
+          />
+        </div>
+      )}
+    </div>
+  )
+}
+
 function BlockViewerCode() {
   const { activeFile, highlightedFiles } = useBlockViewer()
 
@@ -269,7 +325,7 @@ function BlockViewerCode() {
       </div>
       <figure
         data-rehype-pretty-code-figure=""
-        className="mt-0 flex min-w-0 flex-1 flex-col rounded-xl border-none"
+        className="!mx-0 mt-0 flex min-w-0 flex-1 flex-col rounded-xl border-none"
       >
         <figcaption
           className="text-code-foreground [&_svg]:text-code-foreground flex h-12 shrink-0 items-center gap-2 border-b px-4 py-2 [&_svg]:size-4 [&_svg]:opacity-70"
@@ -299,7 +355,7 @@ export function BlockViewerFileTree() {
   }
 
   return (
-    <SidebarProvider className="flex !min-h-full flex-col">
+    <SidebarProvider className="flex !min-h-full flex-col border-r">
       <Sidebar collapsible="none" className="w-full flex-1">
         <SidebarGroupLabel className="h-12 rounded-none border-b px-4 text-sm">
           Files
@@ -414,8 +470,11 @@ function BlockViewer({
   item,
   tree,
   highlightedFiles,
+  children,
   ...props
-}: Pick<BlockViewerContext, "item" | "tree" | "highlightedFiles">) {
+}: Pick<BlockViewerContext, "item" | "tree" | "highlightedFiles"> & {
+  children: React.ReactNode
+}) {
   return (
     <BlockViewerProvider
       item={item}
@@ -426,6 +485,7 @@ function BlockViewer({
       <BlockViewerToolbar />
       <BlockViewerView />
       <BlockViewerCode />
+      <BlockViewerMobile>{children}</BlockViewerMobile>
     </BlockViewerProvider>
   )
 }

apps/v4/components/callout.tsx

@@ -15,7 +15,7 @@ export function Callout({
   return (
     <Alert
       className={cn(
-        "bg-surface text-surface-foreground mt-6 w-auto border-none md:-mx-4",
+        "bg-surface text-surface-foreground mt-6 w-auto border-none md:-mx-1",
         className
       )}
       {...props}

apps/v4/components/cards/calendar.tsx

@@ -9,7 +9,7 @@ const start = new Date(2025, 5, 5)
 
 export function CardsCalendar() {
   return (
-    <Card className="max-w-[260px] p-0">
+    <Card className="hidden max-w-[260px] p-0 sm:flex">
       <CardContent className="p-0">
         <Calendar
           numberOfMonths={1}

apps/v4/components/cards/payments.tsx

@@ -209,7 +209,7 @@ export function CardsPayments() {
         </CardAction>
       </CardHeader>
       <CardContent className="flex flex-col gap-4">
-        <div className="rounded-md border">
+        <div className="overflow-hidden rounded-md border">
           <Table>
             <TableHeader>
               {table.getHeaderGroups().map((headerGroup) => (

apps/v4/components/chart-display.tsx

@@ -1,5 +1,5 @@
 import * as React from "react"
-import { registryItemSchema } from "shadcn/registry"
+import { registryItemSchema } from "shadcn/schema"
 import { z } from "zod"
 
 import { highlightCode } from "@/lib/highlight-code"

apps/v4/components/charts-nav.tsx

@@ -51,7 +51,7 @@ export function ChartsNav({
             <Link
               href={link.href}
               key={link.href}
-              data-active={pathname === link.href}
+              data-active={link.href.startsWith(pathname)}
               className={cn(
                 "text-muted-foreground hover:text-primary data-[active=true]:text-primary flex h-7 shrink-0 items-center justify-center px-4 text-center text-base font-medium transition-colors"
               )}

apps/v4/components/code-collapsible-wrapper.tsx

@@ -22,7 +22,7 @@ export function CodeCollapsibleWrapper({
     <Collapsible
       open={isOpened}
       onOpenChange={setIsOpened}
-      className={cn("group/collapsible relative md:-mx-4", className)}
+      className={cn("group/collapsible relative md:-mx-1", className)}
       {...props}
     >
       <CollapsibleTrigger asChild>

apps/v4/components/command-menu.tsx

@@ -4,9 +4,10 @@ import * as React from "react"
 import { useRouter } from "next/navigation"
 import { type DialogProps } from "@radix-ui/react-dialog"
 import { IconArrowRight } from "@tabler/icons-react"
-import { CornerDownLeftIcon } from "lucide-react"
+import { CornerDownLeftIcon, SquareDashedIcon } from "lucide-react"
 
 import { type Color, type ColorPalette } from "@/lib/colors"
+import { showMcpDocs } from "@/lib/flags"
 import { source } from "@/lib/source"
 import { cn } from "@/lib/utils"
 import { useConfig } from "@/hooks/use-config"
@@ -35,17 +36,21 @@ import { Separator } from "@/registry/new-york-v4/ui/separator"
 export function CommandMenu({
   tree,
   colors,
+  blocks,
+  navItems,
   ...props
 }: DialogProps & {
   tree: typeof source.pageTree
   colors: ColorPalette[]
+  blocks?: { name: string; description: string; categories: string[] }[]
+  navItems?: { href: string; label: string }[]
 }) {
   const router = useRouter()
   const isMac = useIsMac()
   const [config] = useConfig()
   const [open, setOpen] = React.useState(false)
   const [selectedType, setSelectedType] = React.useState<
-    "color" | "page" | "component" | null
+    "color" | "page" | "component" | "block" | null
   >(null)
   const [copyPayload, setCopyPayload] = React.useState("")
   const packageManager = config.packageManager || "pnpm"
@@ -74,6 +79,14 @@ export function CommandMenu({
     [setSelectedType, setCopyPayload]
   )
 
+  const handleBlockHighlight = React.useCallback(
+    (block: { name: string; description: string; categories: string[] }) => {
+      setSelectedType("block")
+      setCopyPayload(`${packageManager} dlx shadcn@latest add ${block.name}`)
+    },
+    [setSelectedType, setCopyPayload, packageManager]
+  )
+
   const runCommand = React.useCallback((command: () => unknown) => {
     setOpen(false)
     command()
@@ -104,6 +117,13 @@ export function CommandMenu({
             })
           }
 
+          if (selectedType === "block") {
+            copyToClipboardWithMeta(copyPayload, {
+              name: "copy_npm_command",
+              properties: { command: copyPayload, pm: packageManager },
+            })
+          }
+
           if (selectedType === "page" || selectedType === "component") {
             copyToClipboardWithMeta(copyPayload, {
               name: "copy_npm_command",
@@ -145,12 +165,45 @@ export function CommandMenu({
           <DialogTitle>Search documentation...</DialogTitle>
           <DialogDescription>Search for a command to run...</DialogDescription>
         </DialogHeader>
-        <Command className="**:data-[slot=command-input-wrapper]:bg-input/50 **:data-[slot=command-input-wrapper]:border-input rounded-none bg-transparent **:data-[slot=command-input]:!h-9 **:data-[slot=command-input]:py-0 **:data-[slot=command-input-wrapper]:mb-0 **:data-[slot=command-input-wrapper]:!h-9 **:data-[slot=command-input-wrapper]:rounded-md **:data-[slot=command-input-wrapper]:border">
+        <Command
+          className="**:data-[slot=command-input-wrapper]:bg-input/50 **:data-[slot=command-input-wrapper]:border-input rounded-none bg-transparent **:data-[slot=command-input]:!h-9 **:data-[slot=command-input]:py-0 **:data-[slot=command-input-wrapper]:mb-0 **:data-[slot=command-input-wrapper]:!h-9 **:data-[slot=command-input-wrapper]:rounded-md **:data-[slot=command-input-wrapper]:border"
+          filter={(value, search, keywords) => {
+            const extendValue = value + " " + (keywords?.join(" ") || "")
+            if (extendValue.toLowerCase().includes(search.toLowerCase())) {
+              return 1
+            }
+            return 0
+          }}
+        >
           <CommandInput placeholder="Search documentation..." />
           <CommandList className="no-scrollbar min-h-80 scroll-pt-2 scroll-pb-1.5">
             <CommandEmpty className="text-muted-foreground py-12 text-center text-sm">
               No results found.
             </CommandEmpty>
+            {navItems && navItems.length > 0 && (
+              <CommandGroup
+                heading="Pages"
+                className="!p-0 [&_[cmdk-group-heading]]:scroll-mt-16 [&_[cmdk-group-heading]]:!p-3 [&_[cmdk-group-heading]]:!pb-1"
+              >
+                {navItems.map((item) => (
+                  <CommandMenuItem
+                    key={item.href}
+                    value={`Navigation ${item.label}`}
+                    keywords={["nav", "navigation", item.label.toLowerCase()]}
+                    onHighlight={() => {
+                      setSelectedType("page")
+                      setCopyPayload("")
+                    }}
+                    onSelect={() => {
+                      runCommand(() => router.push(item.href))
+                    }}
+                  >
+                    <IconArrowRight />
+                    {item.label}
+                  </CommandMenuItem>
+                ))}
+              </CommandGroup>
+            )}
             {tree.children.map((group) => (
               <CommandGroup
                 key={group.$id}
@@ -162,6 +215,10 @@ export function CommandMenu({
                     if (item.type === "page") {
                       const isComponent = item.url.includes("/components/")
 
+                      if (!showMcpDocs && item.url.includes("/mcp")) {
+                        return null
+                      }
+
                       return (
                         <CommandMenuItem
                           key={item.url}
@@ -227,6 +284,41 @@ export function CommandMenu({
                 ))}
               </CommandGroup>
             ))}
+            {blocks?.length ? (
+              <CommandGroup
+                heading="Blocks"
+                className="!p-0 [&_[cmdk-group-heading]]:!p-3"
+              >
+                {blocks.map((block) => (
+                  <CommandMenuItem
+                    key={block.name}
+                    value={block.name}
+                    onHighlight={() => {
+                      handleBlockHighlight(block)
+                    }}
+                    keywords={[
+                      "block",
+                      block.name,
+                      block.description,
+                      ...block.categories,
+                    ]}
+                    onSelect={() => {
+                      runCommand(() =>
+                        router.push(
+                          `/blocks/${block.categories[0]}#${block.name}`
+                        )
+                      )
+                    }}
+                  >
+                    <SquareDashedIcon />
+                    {block.description}
+                    <span className="text-muted-foreground ml-auto font-mono text-xs font-normal tabular-nums">
+                      {block.name}
+                    </span>
+                  </CommandMenuItem>
+                ))}
+              </CommandGroup>
+            ) : null}
           </CommandList>
         </Command>
         <div className="text-muted-foreground absolute inset-x-0 bottom-0 z-20 flex h-10 items-center gap-2 rounded-b-xl border-t border-t-neutral-100 bg-neutral-50 px-4 text-xs font-medium dark:border-t-neutral-700 dark:bg-neutral-800">

apps/v4/components/component-preview-tabs.tsx

@@ -22,7 +22,7 @@ export function ComponentPreviewTabs({
 
   return (
     <div
-      className={cn("group relative my-4 flex flex-col gap-2", className)}
+      className={cn("group relative mt-4 mb-12 flex flex-col gap-2", className)}
       {...props}
     >
       <Tabs
@@ -51,7 +51,7 @@ export function ComponentPreviewTabs({
       </Tabs>
       <div
         data-tab={tab}
-        className="data-[tab=code]:border-code relative rounded-lg border md:-mx-4"
+        className="data-[tab=code]:border-code relative rounded-lg border md:-mx-1"
       >
         <div
           data-slot="preview"

apps/v4/components/component-preview.tsx

@@ -34,7 +34,7 @@ export function ComponentPreview({
 
   if (type === "block") {
     return (
-      <div className="relative aspect-[4/2.5] w-full overflow-hidden rounded-md border md:-mx-4">
+      <div className="relative aspect-[4/2.5] w-full overflow-hidden rounded-md border md:-mx-1">
         <Image
           src={`/r/styles/new-york-v4/${name}-light.png`}
           alt={name}

apps/v4/components/docs-copy-page.tsx

@@ -1,33 +1,156 @@
 "use client"
 
-import { IconCheck, IconCopy } from "@tabler/icons-react"
+import { IconCheck, IconChevronDown, IconCopy } from "@tabler/icons-react"
 
 import { useCopyToClipboard } from "@/hooks/use-copy-to-clipboard"
 import { Button } from "@/registry/new-york-v4/ui/button"
 import {
-  Tooltip,
-  TooltipContent,
-  TooltipTrigger,
-} from "@/registry/new-york-v4/ui/tooltip"
+  DropdownMenu,
+  DropdownMenuContent,
+  DropdownMenuItem,
+  DropdownMenuTrigger,
+} from "@/registry/new-york-v4/ui/dropdown-menu"
+import {
+  Popover,
+  PopoverAnchor,
+  PopoverContent,
+  PopoverTrigger,
+} from "@/registry/new-york-v4/ui/popover"
+import { Separator } from "@/registry/new-york-v4/ui/separator"
 
-export function DocsCopyPage({ page }: { page: string }) {
+function getPromptUrl(baseURL: string, url: string) {
+  return `${baseURL}?q=${encodeURIComponent(
+    `I’m looking at this shadcn/ui documentation: ${url}.
+Help me understand how to use it. Be ready to explain concepts, give examples, or help debug based on it.
+  `
+  )}`
+}
+
+const menuItems = {
+  markdown: (url: string) => (
+    <a href={`${url}.md`} target="_blank" rel="noopener noreferrer">
+      <svg strokeLinejoin="round" viewBox="0 0 22 16">
+        <path
+          fillRule="evenodd"
+          clipRule="evenodd"
+          d="M19.5 2.25H2.5C1.80964 2.25 1.25 2.80964 1.25 3.5V12.5C1.25 13.1904 1.80964 13.75 2.5 13.75H19.5C20.1904 13.75 20.75 13.1904 20.75 12.5V3.5C20.75 2.80964 20.1904 2.25 19.5 2.25ZM2.5 1C1.11929 1 0 2.11929 0 3.5V12.5C0 13.8807 1.11929 15 2.5 15H19.5C20.8807 15 22 13.8807 22 12.5V3.5C22 2.11929 20.8807 1 19.5 1H2.5ZM3 4.5H4H4.25H4.6899L4.98715 4.82428L7 7.02011L9.01285 4.82428L9.3101 4.5H9.75H10H11V5.5V11.5H9V7.79807L7.73715 9.17572L7 9.97989L6.26285 9.17572L5 7.79807V11.5H3V5.5V4.5ZM15 8V4.5H17V8H19.5L17 10.5L16 11.5L15 10.5L12.5 8H15Z"
+          fill="currentColor"
+        />
+      </svg>
+      View as Markdown
+    </a>
+  ),
+  v0: (url: string) => (
+    <a
+      href={getPromptUrl("https://v0.dev", url)}
+      target="_blank"
+      rel="noopener noreferrer"
+    >
+      <svg
+        xmlns="http://www.w3.org/2000/svg"
+        fill="currentColor"
+        viewBox="0 0 147 70"
+        className="size-4.5 -translate-x-px"
+      >
+        <path d="M56 50.203V14h14v46.156C70 65.593 65.593 70 60.156 70c-2.596 0-5.158-1-7-2.843L0 14h19.797L56 50.203ZM147 56h-14V23.953L100.953 56H133v14H96.687C85.814 70 77 61.186 77 50.312V14h14v32.156L123.156 14H91V0h36.312C138.186 0 147 8.814 147 19.688V56Z" />
+      </svg>
+      <span className="-translate-x-[2px]">Open in v0</span>
+    </a>
+  ),
+  chatgpt: (url: string) => (
+    <a
+      href={getPromptUrl("https://chatgpt.com", url)}
+      target="_blank"
+      rel="noopener noreferrer"
+    >
+      <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
+        <path
+          d="M22.282 9.821a5.985 5.985 0 0 0-.516-4.91 6.046 6.046 0 0 0-6.51-2.9A6.065 6.065 0 0 0 4.981 4.18a5.985 5.985 0 0 0-3.998 2.9 6.046 6.046 0 0 0 .743 7.097 5.98 5.98 0 0 0 .51 4.911 6.051 6.051 0 0 0 6.515 2.9A5.985 5.985 0 0 0 13.26 24a6.056 6.056 0 0 0 5.772-4.206 5.99 5.99 0 0 0 3.997-2.9 6.056 6.056 0 0 0-.747-7.073zM13.26 22.43a4.476 4.476 0 0 1-2.876-1.04l.141-.081 4.779-2.758a.795.795 0 0 0 .392-.681v-6.737l2.02 1.168a.071.071 0 0 1 .038.052v5.583a4.504 4.504 0 0 1-4.494 4.494zM3.6 18.304a4.47 4.47 0 0 1-.535-3.014l.142.085 4.783 2.759a.771.771 0 0 0 .78 0l5.843-3.369v2.332a.08.08 0 0 1-.033.062L9.74 19.95a4.5 4.5 0 0 1-6.14-1.646zM2.34 7.896a4.485 4.485 0 0 1 2.366-1.973V11.6a.766.766 0 0 0 .388.676l5.815 3.355-2.02 1.168a.076.076 0 0 1-.071 0l-4.83-2.786A4.504 4.504 0 0 1 2.34 7.872zm16.597 3.855-5.833-3.387L15.119 7.2a.076.076 0 0 1 .071 0l4.83 2.791a4.494 4.494 0 0 1-.676 8.105v-5.678a.79.79 0 0 0-.407-.667zm2.01-3.023-.141-.085-4.774-2.782a.776.776 0 0 0-.785 0L9.409 9.23V6.897a.066.066 0 0 1 .028-.061l4.83-2.787a4.5 4.5 0 0 1 6.68 4.66zm-12.64 4.135-2.02-1.164a.08.08 0 0 1-.038-.057V6.075a4.5 4.5 0 0 1 7.375-3.453l-.142.08-4.778 2.758a.795.795 0 0 0-.393.681zm1.097-2.365 2.602-1.5 2.607 1.5v2.999l-2.597 1.5-2.607-1.5Z"
+          fill="currentColor"
+        />
+      </svg>
+      Open in ChatGPT
+    </a>
+  ),
+  claude: (url: string) => (
+    <a
+      href={getPromptUrl("https://claude.ai/new", url)}
+      target="_blank"
+      rel="noopener noreferrer"
+    >
+      <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
+        <path
+          d="m4.714 15.956 4.718-2.648.079-.23-.08-.128h-.23l-.79-.048-2.695-.073-2.337-.097-2.265-.122-.57-.121-.535-.704.055-.353.48-.321.685.06 1.518.104 2.277.157 1.651.098 2.447.255h.389l.054-.158-.133-.097-.103-.098-2.356-1.596-2.55-1.688-1.336-.972-.722-.491L2 6.223l-.158-1.008.655-.722.88.06.225.061.893.686 1.906 1.476 2.49 1.833.364.304.146-.104.018-.072-.164-.274-1.354-2.446-1.445-2.49-.644-1.032-.17-.619a2.972 2.972 0 0 1-.103-.729L6.287.133 6.7 0l.995.134.42.364.619 1.415L9.735 4.14l1.555 3.03.455.898.243.832.09.255h.159V9.01l.127-1.706.237-2.095.23-2.695.08-.76.376-.91.747-.492.583.28.48.685-.067.444-.286 1.851-.558 2.903-.365 1.942h.213l.243-.242.983-1.306 1.652-2.064.728-.82.85-.904.547-.431h1.032l.759 1.129-.34 1.166-1.063 1.347-.88 1.142-1.263 1.7-.79 1.36.074.11.188-.02 2.853-.606 1.542-.28 1.84-.315.832.388.09.395-.327.807-1.967.486-2.307.462-3.436.813-.043.03.049.061 1.548.146.662.036h1.62l3.018.225.79.522.473.638-.08.485-1.213.62-1.64-.389-3.825-.91-1.31-.329h-.183v.11l1.093 1.068 2.003 1.81 2.508 2.33.127.578-.321.455-.34-.049-2.204-1.657-.85-.747-1.925-1.62h-.127v.17l.443.649 2.343 3.521.122 1.08-.17.353-.607.213-.668-.122-1.372-1.924-1.415-2.168-1.141-1.943-.14.08-.674 7.254-.316.37-.728.28-.607-.461-.322-.747.322-1.476.388-1.924.316-1.53.285-1.9.17-.632-.012-.042-.14.018-1.432 1.967-2.18 2.945-1.724 1.845-.413.164-.716-.37.066-.662.401-.589 2.386-3.036 1.439-1.882.929-1.086-.006-.158h-.055L4.138 18.56l-1.13.146-.485-.456.06-.746.231-.243 1.907-1.312Z"
+          fill="currentColor"
+        />
+      </svg>
+      Open in Claude
+    </a>
+  ),
+}
+
+export function DocsCopyPage({ page, url }: { page: string; url: string }) {
   const { copyToClipboard, isCopied } = useCopyToClipboard()
 
+  const trigger = (
+    <Button
+      variant="secondary"
+      size="sm"
+      className="peer -ml-0.5 size-8 shadow-none md:size-7 md:text-[0.8rem]"
+    >
+      <IconChevronDown className="rotate-180 sm:rotate-0" />
+    </Button>
+  )
+
   return (
-    <Tooltip>
-      <TooltipTrigger asChild>
+    <Popover>
+      <div className="bg-secondary group/buttons relative flex rounded-lg *:[[data-slot=button]]:focus-visible:relative *:[[data-slot=button]]:focus-visible:z-10">
+        <PopoverAnchor />
         <Button
-          variant="outline"
+          variant="secondary"
           size="sm"
-          className="h-8 pl-1.5 md:h-7 [&>svg]:size-3.5"
+          className="h-8 shadow-none md:h-7 md:text-[0.8rem]"
           onClick={() => copyToClipboard(page)}
         >
-          {isCopied ? <IconCheck /> : <IconCopy />} Copy Page
+          {isCopied ? <IconCheck /> : <IconCopy />}
+          Copy Page
         </Button>
-      </TooltipTrigger>
-      <TooltipContent>
-        <p>Copy as Markdown</p>
-      </TooltipContent>
-    </Tooltip>
+        <DropdownMenu>
+          <DropdownMenuTrigger asChild className="hidden sm:flex">
+            {trigger}
+          </DropdownMenuTrigger>
+          <DropdownMenuContent align="end" className="shadow-none">
+            {Object.entries(menuItems).map(([key, value]) => (
+              <DropdownMenuItem key={key} asChild>
+                {value(url)}
+              </DropdownMenuItem>
+            ))}
+          </DropdownMenuContent>
+        </DropdownMenu>
+        <Separator
+          orientation="vertical"
+          className="!bg-foreground/10 absolute top-0 right-8 z-0 !h-8 peer-focus-visible:opacity-0 sm:right-7 sm:!h-7"
+        />
+        <PopoverTrigger asChild className="flex sm:hidden">
+          {trigger}
+        </PopoverTrigger>
+        <PopoverContent
+          className="bg-background/70 dark:bg-background/60 w-52 !origin-center rounded-lg p-1 shadow-sm backdrop-blur-sm"
+          align="start"
+        >
+          {Object.entries(menuItems).map(([key, value]) => (
+            <Button
+              variant="ghost"
+              size="lg"
+              asChild
+              key={key}
+              className="*:[svg]:text-muted-foreground w-full justify-start text-base font-normal"
+            >
+              {value(url)}
+            </Button>
+          ))}
+        </PopoverContent>
+      </div>
+    </Popover>
   )
 }

apps/v4/components/docs-sidebar.tsx

@@ -3,6 +3,7 @@
 import Link from "next/link"
 import { usePathname } from "next/navigation"
 
+import { showMcpDocs } from "@/lib/flags"
 import type { source } from "@/lib/source"
 import {
   Sidebar,
@@ -15,6 +16,28 @@ import {
   SidebarMenuItem,
 } from "@/registry/new-york-v4/ui/sidebar"
 
+const TOP_LEVEL_SECTIONS = [
+  { name: "Get Started", href: "/docs" },
+  {
+    name: "Components",
+    href: "/docs/components",
+  },
+  {
+    name: "Registry",
+    href: "/docs/registry",
+  },
+  {
+    name: "MCP Server",
+    href: "/docs/mcp",
+  },
+  {
+    name: "Changelog",
+    href: "/docs/changelog",
+  },
+]
+const EXCLUDED_SECTIONS = ["installation", "dark-mode"]
+const EXCLUDED_PAGES = ["/docs", "/docs/changelog"]
+
 export function DocsSidebar({
   tree,
   ...props
@@ -23,40 +46,90 @@ export function DocsSidebar({
 
   return (
     <Sidebar
-      className="sticky top-[calc(var(--header-height)+1px)] z-30 hidden h-[calc(100svh-var(--header-height)-var(--footer-height))] bg-transparent lg:flex"
+      className="sticky top-[calc(var(--header-height)+1px)] z-30 hidden h-[calc(100svh-var(--footer-height)+2rem)] bg-transparent lg:flex"
       collapsible="none"
       {...props}
     >
-      <SidebarContent className="no-scrollbar px-2 pb-12">
+      <SidebarContent className="no-scrollbar overflow-x-hidden px-2 pb-12">
         <div className="h-(--top-spacing) shrink-0" />
-        {tree.children.map((item) => (
-          <SidebarGroup key={item.$id}>
-            <SidebarGroupLabel className="text-muted-foreground font-medium">
-              {item.name}
-            </SidebarGroupLabel>
-            <SidebarGroupContent>
-              {item.type === "folder" && (
-                <SidebarMenu className="gap-0.5">
-                  {item.children.map((item) => {
-                    return (
-                      item.type === "page" && (
-                        <SidebarMenuItem key={item.url}>
-                          <SidebarMenuButton
-                            asChild
-                            isActive={item.url === pathname}
-                            className="data-[active=true]:bg-accent data-[active=true]:border-accent relative h-[30px] w-fit overflow-visible border border-transparent text-[0.8rem] font-medium after:absolute after:inset-x-0 after:-inset-y-1 after:z-0 after:rounded-md"
-                          >
-                            <Link href={item.url}>{item.name}</Link>
-                          </SidebarMenuButton>
-                        </SidebarMenuItem>
+        <SidebarGroup>
+          <SidebarGroupLabel className="text-muted-foreground font-medium">
+            Sections
+          </SidebarGroupLabel>
+          <SidebarGroupContent>
+            <SidebarMenu>
+              {TOP_LEVEL_SECTIONS.map(({ name, href }) => {
+                if (!showMcpDocs && href.includes("/mcp")) {
+                  return null
+                }
+                return (
+                  <SidebarMenuItem key={name}>
+                    <SidebarMenuButton
+                      asChild
+                      isActive={
+                        href === "/docs"
+                          ? pathname === href
+                          : pathname.startsWith(href)
+                      }
+                      className="data-[active=true]:bg-accent data-[active=true]:border-accent 3xl:fixed:w-full 3xl:fixed:max-w-48 relative h-[30px] w-fit overflow-visible border border-transparent text-[0.8rem] font-medium after:absolute after:inset-x-0 after:-inset-y-1 after:z-0 after:rounded-md"
+                    >
+                      <Link href={href}>
+                        <span className="absolute inset-0 flex w-(--sidebar-width) bg-transparent" />
+                        {name}
+                      </Link>
+                    </SidebarMenuButton>
+                  </SidebarMenuItem>
+                )
+              })}
+            </SidebarMenu>
+          </SidebarGroupContent>
+        </SidebarGroup>
+        {tree.children.map((item) => {
+          if (EXCLUDED_SECTIONS.includes(item.$id ?? "")) {
+            return null
+          }
+
+          return (
+            <SidebarGroup key={item.$id}>
+              <SidebarGroupLabel className="text-muted-foreground font-medium">
+                {item.name}
+              </SidebarGroupLabel>
+              <SidebarGroupContent>
+                {item.type === "folder" && (
+                  <SidebarMenu className="gap-0.5">
+                    {item.children.map((item) => {
+                      if (
+                        !showMcpDocs &&
+                        item.type === "page" &&
+                        item.url?.includes("/mcp")
+                      ) {
+                        return null
+                      }
+
+                      return (
+                        item.type === "page" &&
+                        !EXCLUDED_PAGES.includes(item.url) && (
+                          <SidebarMenuItem key={item.url}>
+                            <SidebarMenuButton
+                              asChild
+                              isActive={item.url === pathname}
+                              className="data-[active=true]:bg-accent data-[active=true]:border-accent 3xl:fixed:w-full 3xl:fixed:max-w-48 relative h-[30px] w-fit overflow-visible border border-transparent text-[0.8rem] font-medium after:absolute after:inset-x-0 after:-inset-y-1 after:z-0 after:rounded-md"
+                            >
+                              <Link href={item.url}>
+                                <span className="absolute inset-0 flex w-(--sidebar-width) bg-transparent" />
+                                {item.name}
+                              </Link>
+                            </SidebarMenuButton>
+                          </SidebarMenuItem>
+                        )
                       )
-                    )
-                  })}
-                </SidebarMenu>
-              )}
-            </SidebarGroupContent>
-          </SidebarGroup>
-        ))}
+                    })}
+                  </SidebarMenu>
+                )}
+              </SidebarGroupContent>
+            </SidebarGroup>
+          )
+        })}
       </SidebarContent>
     </Sidebar>
   )

apps/v4/components/mobile-nav.tsx

@@ -4,6 +4,7 @@ import * as React from "react"
 import Link, { LinkProps } from "next/link"
 import { useRouter } from "next/navigation"
 
+import { showMcpDocs } from "@/lib/flags"
 import { source } from "@/lib/source"
 import { cn } from "@/lib/utils"
 import { Button } from "@/registry/new-york-v4/ui/button"
@@ -13,6 +14,26 @@ import {
   PopoverTrigger,
 } from "@/registry/new-york-v4/ui/popover"
 
+const TOP_LEVEL_SECTIONS = [
+  { name: "Get Started", href: "/docs" },
+  {
+    name: "Components",
+    href: "/docs/components",
+  },
+  {
+    name: "Registry",
+    href: "/docs/registry",
+  },
+  {
+    name: "MCP Server",
+    href: "/docs/mcp",
+  },
+  {
+    name: "Changelog",
+    href: "/docs/changelog",
+  },
+]
+
 export function MobileNav({
   tree,
   items,
@@ -79,6 +100,23 @@ export function MobileNav({
               ))}
             </div>
           </div>
+          <div className="flex flex-col gap-4">
+            <div className="text-muted-foreground text-sm font-medium">
+              Sections
+            </div>
+            <div className="flex flex-col gap-3">
+              {TOP_LEVEL_SECTIONS.map(({ name, href }) => {
+                if (!showMcpDocs && href.includes("/mcp")) {
+                  return null
+                }
+                return (
+                  <MobileLink key={name} href={href} onOpenChange={setOpen}>
+                    {name}
+                  </MobileLink>
+                )
+              })}
+            </div>
+          </div>
           <div className="flex flex-col gap-8">
             {tree?.children?.map((group, index) => {
               if (group.type === "folder") {
@@ -90,6 +128,9 @@ export function MobileNav({
                     <div className="flex flex-col gap-3">
                       {group.children.map((item) => {
                         if (item.type === "page") {
+                          if (!showMcpDocs && item.url.includes("/mcp")) {
+                            return null
+                          }
                           return (
                             <MobileLink
                               key={`${item.url}-${index}`}

apps/v4/components/mode-switcher.tsx

@@ -24,6 +24,7 @@ export function ModeSwitcher() {
       size="icon"
       className="group/toggle extend-touch-target size-8"
       onClick={toggleTheme}
+      title="Toggle theme"
     >
       <svg
         xmlns="http://www.w3.org/2000/svg"

apps/v4/components/open-in-v0-button.tsx

@@ -3,7 +3,7 @@ import { Icons } from "@/components/icons"
 import { Button } from "@/registry/new-york-v4/ui/button"
 
 // v0 uses the default style.
-const V0_STYLE = "default"
+const V0_STYLE = "new-york-v4"
 
 export function OpenInV0Button({
   name,

apps/v4/components/open-in-v0-cta.tsx

@@ -13,7 +13,7 @@ export function OpenInV0Cta({ className }: React.ComponentProps<"div">) {
         Deploy your shadcn/ui app on Vercel
       </div>
       <div className="text-muted-foreground">
-        Trusted by OpenAI, Sonos, Chick-fil-A, and more.
+        Trusted by OpenAI, Sonos, Adobe, and more.
       </div>
       <div className="text-muted-foreground">
         Vercel provides tools and infrastructure to deploy apps and features at

apps/v4/components/site-config.tsx

@@ -0,0 +1,33 @@
+"use client"
+
+import * as React from "react"
+import { GalleryHorizontalIcon } from "lucide-react"
+
+import { trackEvent } from "@/lib/events"
+import { cn } from "@/lib/utils"
+import { useLayout } from "@/hooks/use-layout"
+import { Button } from "@/registry/new-york-v4/ui/button"
+
+export function SiteConfig({ className }: React.ComponentProps<typeof Button>) {
+  const { layout, setLayout } = useLayout()
+
+  return (
+    <Button
+      variant="ghost"
+      size="icon"
+      onClick={() => {
+        const newLayout = layout === "fixed" ? "full" : "fixed"
+        setLayout(newLayout)
+        trackEvent({
+          name: "set_layout",
+          properties: { layout: newLayout },
+        })
+      }}
+      className={cn("size-8", className)}
+      title="Toggle layout"
+    >
+      <span className="sr-only">Toggle layout</span>
+      <GalleryHorizontalIcon />
+    </Button>
+  )
+}

apps/v4/components/site-footer.tsx

@@ -2,10 +2,10 @@ import { siteConfig } from "@/lib/config"
 
 export function SiteFooter() {
   return (
-    <footer className="group-has-[.section-soft]/body:bg-surface/40 dark:bg-transparent">
+    <footer className="group-has-[.section-soft]/body:bg-surface/40 3xl:fixed:bg-transparent group-has-[.docs-nav]/body:pb-20 group-has-[.docs-nav]/body:sm:pb-0 dark:bg-transparent">
       <div className="container-wrapper px-4 xl:px-6">
         <div className="flex h-(--footer-height) items-center justify-between">
-          <div className="text-muted-foreground w-full text-center text-xs leading-loose sm:text-sm">
+          <div className="text-muted-foreground w-full px-1 text-center text-xs leading-loose sm:text-sm">
             Built by{" "}
             <a
               href={siteConfig.links.twitter}
@@ -14,6 +14,15 @@ export function SiteFooter() {
               className="font-medium underline underline-offset-4"
             >
               shadcn
+            </a>{" "}
+            at{" "}
+            <a
+              href="https://vercel.com/new?utm_source=shadcn_site&utm_medium=web&utm_campaign=docs_cta_deploy_now_callout"
+              target="_blank"
+              rel="noreferrer"
+              className="font-medium underline underline-offset-4"
+            >
+              Vercel
             </a>
             . The source code is available on{" "}
             <a

apps/v4/components/site-header.tsx

@@ -9,6 +9,8 @@ import { Icons } from "@/components/icons"
 import { MainNav } from "@/components/main-nav"
 import { MobileNav } from "@/components/mobile-nav"
 import { ModeSwitcher } from "@/components/mode-switcher"
+import { SiteConfig } from "@/components/site-config"
+// import blocks from "@/registry/__blocks__.json"
 import { Button } from "@/registry/new-york-v4/ui/button"
 import { Separator } from "@/registry/new-york-v4/ui/separator"
 
@@ -18,8 +20,8 @@ export function SiteHeader() {
 
   return (
     <header className="bg-background sticky top-0 z-50 w-full">
-      <div className="container-wrapper px-6">
-        <div className="flex h-(--header-height) items-center gap-2 **:data-[slot=separator]:!h-4">
+      <div className="container-wrapper 3xl:fixed:px-0 px-6">
+        <div className="3xl:fixed:container flex h-(--header-height) items-center gap-2 **:data-[slot=separator]:!h-4">
           <MobileNav
             tree={pageTree}
             items={siteConfig.navItems}
@@ -39,13 +41,19 @@ export function SiteHeader() {
           <MainNav items={siteConfig.navItems} className="hidden lg:flex" />
           <div className="ml-auto flex items-center gap-2 md:flex-1 md:justify-end">
             <div className="hidden w-full flex-1 md:flex md:w-auto md:flex-none">
-              <CommandMenu tree={pageTree} colors={colors} />
+              <CommandMenu
+                tree={pageTree}
+                colors={colors}
+                navItems={siteConfig.navItems}
+              />
             </div>
             <Separator
               orientation="vertical"
               className="ml-2 hidden lg:block"
             />
             <GitHubLink />
+            <Separator orientation="vertical" className="3xl:flex hidden" />
+            <SiteConfig className="3xl:flex hidden" />
             <Separator orientation="vertical" />
             <ModeSwitcher />
           </div>

apps/v4/components/theme-customizer.tsx

@@ -0,0 +1,569 @@
+"use client"
+
+import * as React from "react"
+import template from "lodash/template"
+import { CheckIcon, ClipboardIcon } from "lucide-react"
+
+import { cn } from "@/lib/utils"
+import { useThemeConfig } from "@/components/active-theme"
+import { copyToClipboardWithMeta } from "@/components/copy-button"
+import { Icons } from "@/components/icons"
+import { Button } from "@/registry/new-york-v4/ui/button"
+import {
+  Dialog,
+  DialogContent,
+  DialogDescription,
+  DialogHeader,
+  DialogTitle,
+  DialogTrigger,
+} from "@/registry/new-york-v4/ui/dialog"
+import {
+  Drawer,
+  DrawerContent,
+  DrawerDescription,
+  DrawerHeader,
+  DrawerTitle,
+  DrawerTrigger,
+} from "@/registry/new-york-v4/ui/drawer"
+import { Label } from "@/registry/new-york-v4/ui/label"
+import { ScrollArea, ScrollBar } from "@/registry/new-york-v4/ui/scroll-area"
+import {
+  Select,
+  SelectContent,
+  SelectGroup,
+  SelectItem,
+  SelectTrigger,
+  SelectValue,
+} from "@/registry/new-york-v4/ui/select"
+import {
+  Tabs,
+  TabsContent,
+  TabsList,
+  TabsTrigger,
+} from "@/registry/new-york-v4/ui/tabs"
+import {
+  BaseColor,
+  baseColors,
+  baseColorsOKLCH,
+} from "@/registry/registry-base-colors"
+
+interface BaseColorOKLCH {
+  light: Record<string, string>
+  dark: Record<string, string>
+}
+
+const THEMES = baseColors.filter(
+  (theme) => !["slate", "stone", "gray", "zinc"].includes(theme.name)
+)
+
+export function ThemeCustomizer({ className }: React.ComponentProps<"div">) {
+  const { activeTheme = "neutral", setActiveTheme } = useThemeConfig()
+
+  return (
+    <div className={cn("flex w-full items-center gap-2", className)}>
+      <ScrollArea className="hidden max-w-[96%] md:max-w-[600px] lg:flex lg:max-w-none">
+        <div className="flex items-center">
+          {THEMES.map((theme) => (
+            <Button
+              key={theme.name}
+              variant="link"
+              size="sm"
+              data-active={activeTheme === theme.name}
+              className="text-muted-foreground hover:text-primary data-[active=true]:text-primary flex h-7 cursor-pointer items-center justify-center px-4 text-center text-base font-medium capitalize transition-colors hover:no-underline"
+              onClick={() => setActiveTheme(theme.name)}
+            >
+              {theme.name === "neutral" ? "Default" : theme.name}
+            </Button>
+          ))}
+        </div>
+        <ScrollBar orientation="horizontal" className="invisible" />
+      </ScrollArea>
+      <div className="flex items-center gap-2 lg:hidden">
+        <Label htmlFor="theme-selector" className="sr-only">
+          Theme
+        </Label>
+        <Select
+          value={activeTheme === "default" ? "neutral" : activeTheme}
+          onValueChange={setActiveTheme}
+        >
+          <SelectTrigger
+            id="theme-selector"
+            size="sm"
+            className="justify-start capitalize shadow-none *:data-[slot=select-value]:w-12 *:data-[slot=select-value]:capitalize"
+          >
+            <span className="font-medium">Theme:</span>
+            <SelectValue placeholder="Select a theme" />
+          </SelectTrigger>
+          <SelectContent align="end">
+            <SelectGroup>
+              {THEMES.map((theme) => (
+                <SelectItem
+                  key={theme.name}
+                  value={theme.name}
+                  className="capitalize data-[state=checked]:opacity-50"
+                >
+                  {theme.name}
+                </SelectItem>
+              ))}
+            </SelectGroup>
+          </SelectContent>
+        </Select>
+      </div>
+      <CopyCodeButton variant="secondary" size="sm" className="ml-auto" />
+    </div>
+  )
+}
+
+export function CopyCodeButton({
+  className,
+  ...props
+}: React.ComponentProps<typeof Button>) {
+  let { activeTheme: activeThemeName = "neutral" } = useThemeConfig()
+  activeThemeName = activeThemeName === "default" ? "neutral" : activeThemeName
+
+  return (
+    <>
+      <Drawer>
+        <DrawerTrigger asChild>
+          <Button className={cn("sm:hidden", className)} {...props}>
+            Copy Code
+          </Button>
+        </DrawerTrigger>
+        <DrawerContent className="h-auto">
+          <DrawerHeader>
+            <DrawerTitle className="capitalize">
+              {activeThemeName === "neutral" ? "Default" : activeThemeName}
+            </DrawerTitle>
+            <DrawerDescription>
+              Copy and paste the following code into your CSS file.
+            </DrawerDescription>
+          </DrawerHeader>
+          <CustomizerCode themeName={activeThemeName} />
+        </DrawerContent>
+      </Drawer>
+      <Dialog>
+        <DialogTrigger asChild>
+          <Button className={cn("hidden sm:flex", className)} {...props}>
+            Copy Code
+          </Button>
+        </DialogTrigger>
+        <DialogContent className="outline-none md:max-w-3xl">
+          <DialogHeader>
+            <DialogTitle className="capitalize">
+              {activeThemeName === "neutral" ? "Default" : activeThemeName}
+            </DialogTitle>
+            <DialogDescription>
+              Copy and paste the following code into your CSS file.
+            </DialogDescription>
+          </DialogHeader>
+          <CustomizerCode themeName={activeThemeName} />
+        </DialogContent>
+      </Dialog>
+    </>
+  )
+}
+
+function CustomizerCode({ themeName }: { themeName: string }) {
+  const [hasCopied, setHasCopied] = React.useState(false)
+  const [tailwindVersion, setTailwindVersion] = React.useState("v4")
+  const activeTheme = React.useMemo(
+    () => baseColors.find((theme) => theme.name === themeName),
+    [themeName]
+  )
+  const activeThemeOKLCH = React.useMemo(
+    () => baseColorsOKLCH[themeName as keyof typeof baseColorsOKLCH],
+    [themeName]
+  )
+
+  React.useEffect(() => {
+    if (hasCopied) {
+      setTimeout(() => {
+        setHasCopied(false)
+      }, 2000)
+    }
+  }, [hasCopied])
+
+  return (
+    <>
+      <Tabs
+        value={tailwindVersion}
+        onValueChange={setTailwindVersion}
+        className="min-w-0 px-4 pb-4 md:p-0"
+      >
+        <TabsList>
+          <TabsTrigger value="v4">Tailwind v4</TabsTrigger>
+          <TabsTrigger value="v3">Tailwind v3</TabsTrigger>
+        </TabsList>
+        <TabsContent value="v4">
+          <figure
+            data-rehype-pretty-code-figure
+            className="!mx-0 mt-0 rounded-lg"
+          >
+            <figcaption
+              className="text-code-foreground [&_svg]:text-code-foreground flex items-center gap-2 [&_svg]:size-4 [&_svg]:opacity-70"
+              data-rehype-pretty-code-title=""
+              data-language="css"
+              data-theme="github-dark github-light-default"
+            >
+              <Icons.css className="fill-foreground" />
+              app/globals.css
+            </figcaption>
+            <pre className="no-scrollbar max-h-[300px] min-w-0 overflow-x-auto px-4 py-3.5 outline-none has-[[data-highlighted-line]]:px-0 has-[[data-line-numbers]]:px-0 has-[[data-slot=tabs]]:p-0 md:max-h-[450px]">
+              <Button
+                data-slot="copy-button"
+                size="icon"
+                variant="ghost"
+                className="bg-code text-code-foreground absolute top-3 right-2 z-10 size-7 shadow-none hover:opacity-100 focus-visible:opacity-100"
+                onClick={() => {
+                  copyToClipboardWithMeta(
+                    tailwindVersion === "v3"
+                      ? getThemeCode(activeTheme, 0.65)
+                      : getThemeCodeOKLCH(activeThemeOKLCH, 0.65),
+                    {
+                      name: "copy_theme_code",
+                      properties: {
+                        theme: themeName,
+                        radius: 0.5,
+                      },
+                    }
+                  )
+                  setHasCopied(true)
+                }}
+              >
+                <span className="sr-only">Copy</span>
+                {hasCopied ? <CheckIcon /> : <ClipboardIcon />}
+              </Button>
+              <code data-line-numbers data-language="css">
+                <span data-line className="line text-code-foreground">
+                  &nbsp;:root &#123;
+                </span>
+                <span data-line className="line text-code-foreground">
+                  &nbsp;&nbsp;&nbsp;--radius: 0.65rem;
+                </span>
+                {Object.entries(activeThemeOKLCH?.light).map(([key, value]) => (
+                  <span
+                    data-line
+                    className="line text-code-foreground"
+                    key={key}
+                  >
+                    &nbsp;&nbsp;&nbsp;--{key}: {value};
+                  </span>
+                ))}
+                <span data-line className="line text-code-foreground">
+                  &nbsp;&#125;
+                </span>
+                <span data-line className="line text-code-foreground">
+                  &nbsp;
+                </span>
+                <span data-line className="line text-code-foreground">
+                  &nbsp;.dark &#123;
+                </span>
+                {Object.entries(activeThemeOKLCH?.dark).map(([key, value]) => (
+                  <span
+                    data-line
+                    className="line text-code-foreground"
+                    key={key}
+                  >
+                    &nbsp;&nbsp;&nbsp;--{key}: {value};
+                  </span>
+                ))}
+                <span data-line className="line text-code-foreground">
+                  &nbsp;&#125;
+                </span>
+              </code>
+            </pre>
+          </figure>
+        </TabsContent>
+        <TabsContent value="v3">
+          <figure
+            data-rehype-pretty-code-figure
+            className="!mx-0 mt-0 rounded-lg"
+          >
+            <figcaption
+              className="text-code-foreground [&_svg]:text-code-foreground flex items-center gap-2 [&_svg]:size-4 [&_svg]:opacity-70"
+              data-rehype-pretty-code-title=""
+              data-language="css"
+              data-theme="github-dark github-light-default"
+            >
+              <Icons.css className="fill-foreground" />
+              app/globals.css
+            </figcaption>
+            <pre className="no-scrollbar max-h-[300px] min-w-0 overflow-x-auto px-4 py-3.5 outline-none has-[[data-highlighted-line]]:px-0 has-[[data-line-numbers]]:px-0 has-[[data-slot=tabs]]:p-0 md:max-h-[450px]">
+              <Button
+                data-slot="copy-button"
+                size="icon"
+                variant="ghost"
+                className="bg-code text-code-foreground absolute top-3 right-2 z-10 size-7 shadow-none hover:opacity-100 focus-visible:opacity-100"
+                onClick={() => {
+                  copyToClipboardWithMeta(
+                    tailwindVersion === "v3"
+                      ? getThemeCode(activeTheme, 0.65)
+                      : getThemeCodeOKLCH(activeThemeOKLCH, 0.65),
+                    {
+                      name: "copy_theme_code",
+                      properties: {
+                        theme: themeName,
+                        radius: 0.5,
+                      },
+                    }
+                  )
+                  setHasCopied(true)
+                }}
+              >
+                <span className="sr-only">Copy</span>
+                {hasCopied ? <CheckIcon /> : <ClipboardIcon />}
+              </Button>
+              <code data-line-numbers data-language="css">
+                <span data-line className="line">
+                  @layer base &#123;
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;:root &#123;
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--background:{" "}
+                  {activeTheme?.cssVars.light["background"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--foreground:{" "}
+                  {activeTheme?.cssVars.light["foreground"]};
+                </span>
+                {[
+                  "card",
+                  "popover",
+                  "primary",
+                  "secondary",
+                  "muted",
+                  "accent",
+                  "destructive",
+                ].map((prefix) => (
+                  <React.Fragment key={prefix}>
+                    <span data-line className="line">
+                      &nbsp;&nbsp;&nbsp;&nbsp;--{prefix}:{" "}
+                      {
+                        activeTheme?.cssVars.light[
+                          prefix as keyof typeof activeTheme.cssVars.light
+                        ]
+                      }
+                      ;
+                    </span>
+                    <span data-line className="line">
+                      &nbsp;&nbsp;&nbsp;&nbsp;--{prefix}-foreground:{" "}
+                      {
+                        activeTheme?.cssVars.light[
+                          `${prefix}-foreground` as keyof typeof activeTheme.cssVars.light
+                        ]
+                      }
+                      ;
+                    </span>
+                  </React.Fragment>
+                ))}
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--border:{" "}
+                  {activeTheme?.cssVars.light["border"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--input:{" "}
+                  {activeTheme?.cssVars.light["input"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--ring:{" "}
+                  {activeTheme?.cssVars.light["ring"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--radius: 0.5rem;
+                </span>
+                {["chart-1", "chart-2", "chart-3", "chart-4", "chart-5"].map(
+                  (prefix) => (
+                    <React.Fragment key={prefix}>
+                      <span data-line className="line">
+                        &nbsp;&nbsp;&nbsp;&nbsp;--{prefix}:{" "}
+                        {
+                          activeTheme?.cssVars.light[
+                            prefix as keyof typeof activeTheme.cssVars.light
+                          ]
+                        }
+                        ;
+                      </span>
+                    </React.Fragment>
+                  )
+                )}
+                <span data-line className="line">
+                  &nbsp;&nbsp;&#125;
+                </span>
+                <span data-line className="line">
+                  &nbsp;
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;.dark &#123;
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--background:{" "}
+                  {activeTheme?.cssVars.dark["background"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--foreground:{" "}
+                  {activeTheme?.cssVars.dark["foreground"]};
+                </span>
+                {[
+                  "card",
+                  "popover",
+                  "primary",
+                  "secondary",
+                  "muted",
+                  "accent",
+                  "destructive",
+                ].map((prefix) => (
+                  <React.Fragment key={prefix}>
+                    <span data-line className="line">
+                      &nbsp;&nbsp;&nbsp;&nbsp;--{prefix}:{" "}
+                      {
+                        activeTheme?.cssVars.dark[
+                          prefix as keyof typeof activeTheme.cssVars.dark
+                        ]
+                      }
+                      ;
+                    </span>
+                    <span data-line className="line">
+                      &nbsp;&nbsp;&nbsp;&nbsp;--{prefix}-foreground:{" "}
+                      {
+                        activeTheme?.cssVars.dark[
+                          `${prefix}-foreground` as keyof typeof activeTheme.cssVars.dark
+                        ]
+                      }
+                      ;
+                    </span>
+                  </React.Fragment>
+                ))}
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--border:{" "}
+                  {activeTheme?.cssVars.dark["border"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--input:{" "}
+                  {activeTheme?.cssVars.dark["input"]};
+                </span>
+                <span data-line className="line">
+                  &nbsp;&nbsp;&nbsp;&nbsp;--ring:{" "}
+                  {activeTheme?.cssVars.dark["ring"]};
+                </span>
+                {["chart-1", "chart-2", "chart-3", "chart-4", "chart-5"].map(
+                  (prefix) => (
+                    <React.Fragment key={prefix}>
+                      <span data-line className="line">
+                        &nbsp;&nbsp;&nbsp;&nbsp;--{prefix}:{" "}
+                        {
+                          activeTheme?.cssVars.dark[
+                            prefix as keyof typeof activeTheme.cssVars.dark
+                          ]
+                        }
+                        ;
+                      </span>
+                    </React.Fragment>
+                  )
+                )}
+                <span data-line className="line">
+                  &nbsp;&nbsp;&#125;
+                </span>
+                <span data-line className="line">
+                  &#125;
+                </span>
+              </code>
+            </pre>
+          </figure>
+        </TabsContent>
+      </Tabs>
+    </>
+  )
+}
+
+function getThemeCodeOKLCH(theme: BaseColorOKLCH | undefined, radius: number) {
+  if (!theme) {
+    return ""
+  }
+
+  const rootSection =
+    ":root {\n  --radius: " +
+    radius +
+    "rem;\n" +
+    Object.entries(theme.light)
+      .map((entry) => "  --" + entry[0] + ": " + entry[1] + ";")
+      .join("\n") +
+    "\n}\n\n.dark {\n" +
+    Object.entries(theme.dark)
+      .map((entry) => "  --" + entry[0] + ": " + entry[1] + ";")
+      .join("\n") +
+    "\n}\n"
+
+  return rootSection
+}
+
+function getThemeCode(theme: BaseColor | undefined, radius: number) {
+  if (!theme) {
+    return ""
+  }
+
+  return template(BASE_STYLES_WITH_VARIABLES)({
+    colors: theme.cssVars,
+    radius: radius.toString(),
+  })
+}
+
+const BASE_STYLES_WITH_VARIABLES = `
+@layer base {
+  :root {
+    --background: <%- colors.light["background"] %>;
+    --foreground: <%- colors.light["foreground"] %>;
+    --card: <%- colors.light["card"] %>;
+    --card-foreground: <%- colors.light["card-foreground"] %>;
+    --popover: <%- colors.light["popover"] %>;
+    --popover-foreground: <%- colors.light["popover-foreground"] %>;
+    --primary: <%- colors.light["primary"] %>;
+    --primary-foreground: <%- colors.light["primary-foreground"] %>;
+    --secondary: <%- colors.light["secondary"] %>;
+    --secondary-foreground: <%- colors.light["secondary-foreground"] %>;
+    --muted: <%- colors.light["muted"] %>;
+    --muted-foreground: <%- colors.light["muted-foreground"] %>;
+    --accent: <%- colors.light["accent"] %>;
+    --accent-foreground: <%- colors.light["accent-foreground"] %>;
+    --destructive: <%- colors.light["destructive"] %>;
+    --destructive-foreground: <%- colors.light["destructive-foreground"] %>;
+    --border: <%- colors.light["border"] %>;
+    --input: <%- colors.light["input"] %>;
+    --ring: <%- colors.light["ring"] %>;
+    --radius: <%- radius %>rem;
+    --chart-1: <%- colors.light["chart-1"] %>;
+    --chart-2: <%- colors.light["chart-2"] %>;
+    --chart-3: <%- colors.light["chart-3"] %>;
+    --chart-4: <%- colors.light["chart-4"] %>;
+    --chart-5: <%- colors.light["chart-5"] %>;
+  }
+
+  .dark {
+    --background: <%- colors.dark["background"] %>;
+    --foreground: <%- colors.dark["foreground"] %>;
+    --card: <%- colors.dark["card"] %>;
+    --card-foreground: <%- colors.dark["card-foreground"] %>;
+    --popover: <%- colors.dark["popover"] %>;
+    --popover-foreground: <%- colors.dark["popover-foreground"] %>;
+    --primary: <%- colors.dark["primary"] %>;
+    --primary-foreground: <%- colors.dark["primary-foreground"] %>;
+    --secondary: <%- colors.dark["secondary"] %>;
+    --secondary-foreground: <%- colors.dark["secondary-foreground"] %>;
+    --muted: <%- colors.dark["muted"] %>;
+    --muted-foreground: <%- colors.dark["muted-foreground"] %>;
+    --accent: <%- colors.dark["accent"] %>;
+    --accent-foreground: <%- colors.dark["accent-foreground"] %>;
+    --destructive: <%- colors.dark["destructive"] %>;
+    --destructive-foreground: <%- colors.dark["destructive-foreground"] %>;
+    --border: <%- colors.dark["border"] %>;
+    --input: <%- colors.dark["input"] %>;
+    --ring: <%- colors.dark["ring"] %>;
+    --chart-1: <%- colors.dark["chart-1"] %>;
+    --chart-2: <%- colors.dark["chart-2"] %>;
+    --chart-3: <%- colors.dark["chart-3"] %>;
+    --chart-4: <%- colors.dark["chart-4"] %>;
+    --chart-5: <%- colors.dark["chart-5"] %>;
+  }
+}
+`

apps/v4/content/docs/(root)/changelog.mdx

@@ -4,6 +4,291 @@ description: Latest updates and announcements.
 toc: false
 ---
 
+## September 2025 - Registry Index
+
+We've created an index of open source registries that you can install items from.
+
+You can search, view and add items from the registry index without configuring the `.components.json` file.
+
+They'll be automatically added to your `components.json` file for you.
+
+```bash
+npx shadcn add @ai-elements/prompt-input
+```
+
+The full list of registries is available at [https://ui.shadcn.com/r/registries.json](https://ui.shadcn.com/r/registries.json).
+
+To add a registry to the index, submit a PR to the `shadcn/ui` repository. See the [registry index documentation](/docs/registry/registry-index) for more details.
+
+---
+
+## August 2025 - shadcn CLI 3.0 and MCP Server
+
+We just shipped shadcn CLI 3.0 with support for namespaced registries, advanced authentication, new commands and a completely rewritten registry engine.
+
+### What's New
+
+- [Namespaced Registries](#namespaced-registries) - Install components using `@registry/name` format.
+- [Private Registries](#private-registries) - Secure your registry with advanced authentication.
+- [Search & Discovery](#search--discovery) - New commands to find and view code before installing.
+- [MCP Server](#mcp-server) - MCP server for all registries.
+- [Faster Everything](#faster-everything) - Completely rewritten registry resolution.
+- [Improved Error Handling](#improved-error-handling) - Better error messages for users and LLMs.
+- [Upgrade Guide](#upgrade-guide) - Migration notes for existing users.
+
+### Namespaced Registries
+
+The biggest change in 3.0 is namespaced registries. You can now install components from registries: a community registry, your company's private registry or internal registry, using the `@registry/name` format.
+
+This makes it easier to distribute code across teams and projects.
+
+Configure registries in your `components.json`:
+
+```json title="components.json"
+{
+  "registries": {
+    "@acme": "https://acme.com/r/{name}.json",
+    "@internal": {
+      "url": "https://registry.company.com/{name}",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+Then use the `@registry/name` format to install components:
+
+```bash
+npx shadcn add @acme/button @internal/auth-system
+```
+
+It's completely decentralized. There's no central registrar. Create any namespace you want and organize components however makes sense for your team.
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@design": "https://registry.company.com/design/{name}.json",
+    "@engineering": "https://registry.company.com/eng/{name}.json",
+    "@marketing": "https://registry.company.com/marketing/{name}.json"
+  }
+}
+```
+
+Components can even depend on resources from different registries. Everything gets resolved and installed automatically from the right sources.
+
+```json title="registry-item.json" showLineNumbers
+{
+  "name": "dashboard",
+  "type": "registry:block",
+  "registryDependencies": [
+    "@shadcn/card", // From default registry
+    "@v0/chart", // From v0 registry
+    "@acme/data-table", // From acme registry
+    "@lib/data-fetcher", // Utility library
+    "@ai/analytics-prompt" // AI prompt resource
+  ]
+}
+```
+
+### Private Registries
+
+Need to keep your components private? We've got you covered. Configure authentication with tokens, API keys, or custom headers:
+
+```json title="components.json"
+{
+  "registries": {
+    "@private": {
+      "url": "https://registry.company.com/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+Your private components stay private. Perfect for enterprise teams with proprietary UI libraries.
+
+We support all major authentication methods: basic auth, bearer token, api key query params and custom headers.
+
+See the [authentication docs](/docs/registry/authentication) for more details.
+
+### Search & Discovery
+
+Three new commands make it easy to find exactly what you need:
+
+1. View items from the registry before installing
+
+```bash
+npx shadcn view @acme/auth-system
+```
+
+2. Search items from registries
+
+```bash
+npx shadcn search @tweakcn -q "dark"
+```
+
+3. List all items from a registry
+
+```bash
+npx shadcn list @acme
+```
+
+Preview components before installing them. Search across multiple registries. See the code and all dependencies upfront.
+
+### MCP Server
+
+<Image
+  src="/images/mcp.jpeg"
+  width="1432"
+  height="1050"
+  alt="Lift Mode"
+  className="mt-6 w-full overflow-hidden rounded-lg border"
+/>
+
+Back in April, we [introduced](https://x.com/shadcn/status/1917597228513853603) the first version of the MCP server. Since then, we've taken everything we learned and built a better MCP server.
+
+Here's what's new:
+
+- Works with all registries. Zero config
+- One command to add to your favorite MCP clients
+- We improved the underlying tools
+- Better integration with the CLI and registries
+- Support for multiple registries in the same project
+
+Add the MCP server to your project:
+
+```bash
+npx shadcn@latest mcp init
+```
+
+See the [docs](/docs/mcp) for more details.
+
+### Faster Everything
+
+We completely rewrote the registry resolution engine from scratch. It's faster, smarter, and handles even the trickiest dependency trees.
+
+- Up to 3x faster dependency resolution
+- Smarter file deduplication and merging
+- Better monorepo support out of the box
+- Updated `build` command for registry authors
+
+### Improved Error Handling
+
+Registry developers can now provide custom error messages to help guide users (and LLMs) when things go wrong. The CLI displays helpful, actionable errors for common issues:
+
+```txt
+Unknown registry "@acme". Make sure it is defined in components.json as follows:
+{
+  "registries": {
+    "@acme": "[URL_TO_REGISTRY]"
+  }
+}
+```
+
+Missing environment variables? The CLI tells you exactly what's needed:
+
+```txt
+Registry "@private" requires the following environment variables:
+  • REGISTRY_TOKEN
+
+Set the required environment variables to your .env or .env.local file.
+```
+
+Registry authors can provide custom error messages in their responses to help users and AI agents understand and fix issues quickly.
+
+```txt
+Error:
+You are not authorized to access the item at http://example.com/r/component.
+
+Message:
+[Unauthorized] Your API key has expired. Renew it at https://example.com/api/renew-key.
+```
+
+### Upgrade Guide
+
+Here's the best part: there are no breaking changes for users. Your existing `components.json` works exactly the same. All your installed components work exactly the same.
+
+For developers, if you're using the programmatic APIs directly, we've deprecated a few functions in favor of better ones:
+
+- `fetchRegistry` → `getRegistry`
+- `resolveRegistryTree` → `resolveRegistryItems`
+- Schema moved from `shadcn/registry` to `shadcn/schema` package
+
+```diff
+- import { registryItemSchema } from "shadcn/registry"
++ import { registryItemSchema } from "shadcn/schema"
+```
+
+That's it. Seriously. Everything else just works.
+
+---
+
+## July 2025 - Universal Registry Items
+
+We've added support for universal registry items. This allows you to create registry items that can be distributed to any project i.e. no framework, no components.json, no tailwind, no react required.
+
+This new registry item type unlocks a lot of new workflows. You can now distribute code, config, rules, docs, anything to any code project.
+
+See the [docs](/docs/registry/examples) for more details and examples.
+
+---
+
+## July 2025 - Local File Support
+
+The shadcn CLI now supports local files. Initialize projects and add components, themes, hooks, utils and more from local JSON files.
+
+```bash
+# Initialize a project from a local file
+npx shadcn init ./template.json
+
+# Add a component from a local file
+npx shadcn add ./block.json
+```
+
+This feature enables powerful new workflows:
+
+- **Zero setup** - No remote registries required
+- **Faster development** - Test registry items locally before publishing
+- **Enhanced workflow for agents and MCP** - Generate and run registry items locally
+- **Private components** - Keep proprietary components local and private.
+
+---
+
+## June 2025 - `radix-ui`
+
+We've added a new command to migrate to the new `radix-ui` package. This command will replace all `@radix-ui/react-*` imports with `radix-ui`.
+
+```bash
+npx shadcn@latest migrate radix
+```
+
+It will automatically update all imports in your `ui` components and install `radix-ui` as a dependency.
+
+```diff showLineNumbers title="components/ui/alert-dialog.tsx"
+- import * as AlertDialogPrimitive from "@radix-ui/react-dialog"
++ import { AlertDialog as AlertDialogPrimitive } from "radix-ui"
+```
+
+Make sure to test your components and project after running the command.
+
+**Note:** To update imports for newly added components, run the migration command again.
+
+## June 2025 - Calendar Component
+
+We've upgraded the `Calendar` component to the latest version of [React DayPicker](https://daypicker.dev).
+
+This is a major upgrade and includes a lot of new features and improvements. We've also built a collection of 30+ calendar blocks that you can use to build your own calendar components.
+
+See all calendar blocks in the [Blocks Library](/blocks/calendar) page.
+
+<Image src="/images/calendar-2.png" alt="Calendar" width={676} height={895} />
+
+To upgrade your project to the latest version of the `Calendar` component, see the [upgrade guide](/docs/components/calendar#upgrade-guide).
+
 ## May 2025 - New Site
 
 We've upgraded [ui.shadcn.com](https://ui.shadcn.com) to Next.js 15.3 and Tailwind v4. The site now uses the upgraded `new-york` components.
@@ -24,15 +309,15 @@ We're working on zero-config MCP support for shadcn/ui registry. One command `np
   className="mt-6 w-full overflow-hidden rounded-lg border"
 />
 
-Learn more in the thread here: https://x.com/shadcn/status/1917597228513853603
+Learn more in the [thread here](https://x.com/shadcn/status/1917597228513853603).
 
 ## March 2025 - shadcn 2.5.0
 
 We tagged shadcn 2.5.0 earlier this week. It comes with a pretty cool feature: **resolve anywhere**.
 
-Registries can now place files anywhere in an app and we’ll properly resolve imports. No need to stick to a fixed file structure. It can even add files outside the registry itself.
+Registries can now place files anywhere in an app and we'll properly resolve imports. No need to stick to a fixed file structure. It can even add files outside the registry itself.
 
-On install, we track all files and perform a multi-pass resolution to correctly handle imports and aliases. It’s fast.
+On install, we track all files and perform a multi-pass resolution to correctly handle imports and aliases. It's fast.
 
 ## March 2025 - Cross-framework Route Support
 
@@ -49,7 +334,7 @@ What's New:
 - The CLI can now initialize projects with Tailwind v4.
 - Full support for the new @theme directive and @theme inline option.
 - All components are updated for Tailwind v4 and React 19.
-- We’ve removed the forwardRefs and adjusted the types.
+- We've removed the forwardRefs and adjusted the types.
 - Every primitive now has a data-slot attribute for styling.
 - We've fixed and cleaned up the style of the components.
 - We're deprecating the toast component in favor of sonner.
@@ -127,7 +412,7 @@ The new CLI is now available. It's a complete rewrite with a lot of new features
 This is a major step towards distributing code that you and your LLMs can access and use.
 
 1. First up, the cli now has support for all major React framework out of the box. Next.js, Remix, Vite and Laravel. And when you init into a new app, we update your existing Tailwind files instead of overriding.
-2. A component now ship its own dependencies. Take the accordion for example, it can define its Tailwind keyframes. When you add it to your project, we’ll update your tailwind.config.ts file accordingly.
+2. A component now ship its own dependencies. Take the accordion for example, it can define its Tailwind keyframes. When you add it to your project, we'll update your tailwind.config.ts file accordingly.
 3. You can also install remote components using url. `npx shadcn add https://acme.com/registry/navbar.json`.
 4. We have also improve the init command. It does framework detection and can even init a brand new Next.js app in one command. `npx shadcn init`.
 5. We have created a new schema that you can use to ship your own component registry. And since it has support for urls, you can even use it to distribute private components.

apps/v4/content/docs/(root)/cli.mdx

@@ -13,7 +13,7 @@ The `init` command installs dependencies, adds the `cn` util and configures CSS
 npx shadcn@latest init
 ```
 
-### Options
+**Options**
 
 ```bash
 Usage: shadcn init [options] [components...]
@@ -21,23 +21,25 @@ Usage: shadcn init [options] [components...]
 initialize your project and install dependencies
 
 Arguments:
-  components         the components to add or a url to the component.
+  components         name, url or local path to component
 
 Options:
   -t, --template <template>      the template to use. (next, next-monorepo)
   -b, --base-color <base-color>  the base color to use. (neutral, gray, zinc, stone, slate)
   -y, --yes                      skip confirmation prompt. (default: true)
   -f, --force                    force overwrite of existing configuration. (default: false)
-  -c, --cwd <cwd>                the working directory. defaults to the current directory. (default:
-                                 "/Users/shadcn/Code/shadcn/ui/packages/shadcn")
+  -c, --cwd <cwd>                the working directory. defaults to the current directory.
   -s, --silent                   mute output. (default: false)
   --src-dir                      use the src directory when creating a new project. (default: false)
   --no-src-dir                   do not use the src directory when creating a new project.
   --css-variables                use css variables for theming. (default: true)
   --no-css-variables             do not use css variables for theming.
+  --no-base-style                do not install the base shadcn style
   -h, --help                     display help for command
 ```
 
+---
+
 ## add
 
 Use the `add` command to add components and dependencies to your project.
@@ -46,7 +48,7 @@ Use the `add` command to add components and dependencies to your project.
 npx shadcn@latest add [component]
 ```
 
-### Options
+**Options**
 
 ```bash
 Usage: shadcn add [options] [components...]
@@ -54,12 +56,12 @@ Usage: shadcn add [options] [components...]
 add a component to your project
 
 Arguments:
-  components         the components to add or a url to the component.
+  components         name, url or local path to component
 
 Options:
   -y, --yes           skip confirmation prompt. (default: false)
   -o, --overwrite     overwrite existing files. (default: false)
-  -c, --cwd <cwd>     the working directory. defaults to the current directory. (default: "/Users/shadcn/Desktop")
+  -c, --cwd <cwd>     the working directory. defaults to the current directory.
   -a, --all           add all available components (default: false)
   -p, --path <path>   the path to add the component to.
   -s, --silent        mute output. (default: false)
@@ -70,6 +72,126 @@ Options:
   -h, --help          display help for command
 ```
 
+---
+
+## view
+
+Use the `view` command to view items from the registry before installing them.
+
+```bash
+npx shadcn@latest view [item]
+```
+
+You can view multiple items at once:
+
+```bash
+npx shadcn@latest view button card dialog
+```
+
+Or view items from namespaced registries:
+
+```bash
+npx shadcn@latest view @acme/auth @v0/dashboard
+```
+
+**Options**
+
+```bash
+Usage: shadcn view [options] <items...>
+
+view items from the registry
+
+Arguments:
+  items            the item names or URLs to view
+
+Options:
+  -c, --cwd <cwd>  the working directory. defaults to the current directory.
+  -h, --help       display help for command
+```
+
+---
+
+## search
+
+Use the `search` command to search for items from registries.
+
+```bash
+npx shadcn@latest search [registry]
+```
+
+You can search with a query:
+
+```bash
+npx shadcn@latest search @shadcn -q "button"
+```
+
+Or search multiple registries at once:
+
+```bash
+npx shadcn@latest search @shadcn @v0 @acme
+```
+
+The `list` command is an alias for `search`:
+
+```bash
+npx shadcn@latest list @acme
+```
+
+**Options**
+
+```bash
+Usage: shadcn search|list [options] <registries...>
+
+search items from registries
+
+Arguments:
+  registries             the registry names or urls to search items from. Names
+                         must be prefixed with @.
+
+Options:
+  -c, --cwd <cwd>        the working directory. defaults to the current directory.
+  -q, --query <query>    query string
+  -l, --limit <number>   maximum number of items to display per registry (default: "100")
+  -o, --offset <number>  number of items to skip (default: "0")
+  -h, --help             display help for command
+```
+
+---
+
+## list
+
+Use the `list` command to list all items from a registry.
+
+```bash
+npx shadcn@latest list @acme
+```
+
+**Options**
+
+```bash
+Usage: shadcn list [options] <registries...>
+
+list items from registries
+
+Arguments:
+  registries             the registry names or urls to list items from. Names
+    must be prefixed with @.
+```
+
+**Options**
+
+```bash
+Usage: shadcn list [options] <registries...>
+
+list items from registries
+
+Arguments:
+  registries             the registry names or urls to list items from. Names
+    must be prefixed with @.
+```
+
+---
+
 ## build
 
 Use the `build` command to generate the registry JSON files.
@@ -80,7 +202,7 @@ npx shadcn@latest build
 
 This command reads the `registry.json` file and generates the registry JSON files in the `public/r` directory.
 
-### Options
+**Options**
 
 ```bash
 Usage: shadcn build [options] [registry]
@@ -92,8 +214,7 @@ Arguments:
 
 Options:
   -o, --output <path>  destination directory for json files (default: "./public/r")
-  -c, --cwd <cwd>      the working directory. defaults to the current directory. (default:
-                       "/Users/shadcn/Code/shadcn/ui/packages/shadcn")
+  -c, --cwd <cwd>      the working directory. defaults to the current directory.
   -h, --help           display help for command
 ```
 

apps/v4/content/docs/(root)/components-json.mdx

@@ -210,3 +210,94 @@ Import alias for `hooks` such as `use-media-query` or `use-toast`.
   }
 }
 ```
+
+## registries
+
+Configure multiple resource registries for your project. This allows you to install components, libraries, utilities, and other resources from various sources including private registries.
+
+See the <Link href="/docs/registry/namespace">Namespaced Registries</Link> documentation for detailed information.
+
+### Basic Configuration
+
+Configure registries with URL templates:
+
+```json title="components.json"
+{
+  "registries": {
+    "@v0": "https://v0.dev/chat/b/{name}",
+    "@acme": "https://registry.acme.com/{name}.json",
+    "@internal": "https://internal.company.com/{name}.json"
+  }
+}
+```
+
+The `{name}` placeholder is replaced with the resource name when installing.
+
+### Advanced Configuration with Authentication
+
+For private registries that require authentication:
+
+```json title="components.json"
+{
+  "registries": {
+    "@private": {
+      "url": "https://api.company.com/registry/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}",
+        "X-API-Key": "${API_KEY}"
+      },
+      "params": {
+        "version": "latest"
+      }
+    }
+  }
+}
+```
+
+Environment variables in the format `${VAR_NAME}` are automatically expanded from your environment.
+
+### Using Namespaced Registries
+
+Once configured, install resources using the namespace syntax:
+
+```bash
+# Install from a configured registry
+npx shadcn@latest add @v0/dashboard
+
+# Install from private registry
+npx shadcn@latest add @private/button
+
+# Install multiple resources
+npx shadcn@latest add @acme/header @internal/auth-utils
+```
+
+### Example: Multiple Registry Setup
+
+```json title="components.json"
+{
+  "registries": {
+    "@shadcn": "https://ui.shadcn.com/r/{name}.json",
+    "@company-ui": {
+      "url": "https://registry.company.com/ui/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${COMPANY_TOKEN}"
+      }
+    },
+    "@team": {
+      "url": "https://team.company.com/{name}.json",
+      "params": {
+        "team": "frontend",
+        "version": "${REGISTRY_VERSION}"
+      }
+    }
+  }
+}
+```
+
+This configuration allows you to:
+
+- Install public components from shadcn/ui
+- Access private company UI components with authentication
+- Use team-specific resources with versioning
+
+For more information about authentication, see the <Link href="/docs/registry/authentication">Authentication</Link> documentation.

apps/v4/content/docs/(root)/figma.mdx

@@ -15,3 +15,4 @@ description: Every component recreated in Figma. With customizable props, typogr
 ## Free
 
 - [shadcn/ui design system](https://www.figma.com/community/file/1203061493325953101) by [Pietro Schirano](https://twitter.com/skirano) - A design companion for shadcn/ui. Each component was painstakingly crafted to perfectly match the code implementation.
+- [Obra shadcn/ui](https://www.figma.com/community/file/1514746685758799870/obra-shadcn-ui) by [Obra Studio](https://obra.studio/) - Carefully crafted kit designed in the philosophy of shadcn, tracks v4, MIT licensed

apps/v4/content/docs/(root)/mcp.mdx

@@ -0,0 +1,281 @@
+---
+title: MCP Server
+description: Use the shadcn MCP server to browse, search, and install components from registries.
+---
+
+The shadcn MCP Server allows AI assistants to interact with items from registries. You can browse available components, search for specific ones, and install them directly into your project using natural language.
+
+For example, you can ask an AI assistant to "Build a landing page using components from the acme registry" or "Find me a login form from the shadcn registry".
+
+Registries are configured in your project's `components.json` file.
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@acme": "https://acme.com/r/{name}.json"
+  }
+}
+```
+
+---
+
+## Quick Start
+
+Select your MCP client and follow the instructions to configure the shadcn MCP server. If you'd like to do it manually, see the [Configuration](#configuration) section.
+
+<Tabs defaultValue="claude">
+  <TabsList>
+    <TabsTrigger value="claude">Claude Code</TabsTrigger>
+    <TabsTrigger value="cursor">Cursor</TabsTrigger>
+    <TabsTrigger value="vscode">VS Code</TabsTrigger>
+  </TabsList>
+  <TabsContent value="claude" className="mt-4">
+    **Run the following command** in your project:
+       ```bash
+       npx shadcn@latest mcp init --client claude
+       ```
+
+    **Restart Claude Code** and try the following prompts:
+       - Show me all available components in the shadcn registry
+       - Add the button, dialog and card components to my project
+       - Create a contact form using components from the shadcn registry
+
+    **Note:** You can use `/mcp` command in Claude Code to debug the MCP server.
+
+  </TabsContent>
+
+  <TabsContent value="cursor" className="mt-4">
+    **Run the following command** in your project:
+       ```bash
+       npx shadcn@latest mcp init --client cursor
+       ```
+
+    Open **Cursor Settings** and **Enable the MCP server** for shadcn. Then try the following prompts:
+       - Show me all available components in the shadcn registry
+       - Add the button, dialog and card components to my project
+       - Create a contact form using components from the shadcn registry
+
+  </TabsContent>
+
+  <TabsContent value="vscode" className="mt-4">
+    **Run the following command** in your project:
+       ```bash
+       npx shadcn@latest mcp init --client vscode
+       ```
+
+    Open `.vscode/mcp.json` and click **Start** next to the shadcn server. Then try the following prompts with GitHub Copilot:
+       - Show me all available components in the shadcn registry
+       - Add the button, dialog and card components to my project
+       - Create a contact form using components from the shadcn registry
+
+  </TabsContent>
+</Tabs>
+
+---
+
+## What is MCP?
+
+[Model Context Protocol (MCP)](https://modelcontextprotocol.io) is an open protocol that enables AI assistants to securely connect to external data sources and tools. With the shadcn MCP server, your AI assistant gains direct access to:
+
+- **Browse Components** - List all available components, blocks, and templates from any configured registry
+- **Search Across Registries** - Find specific components by name or functionality across multiple sources
+- **Install with Natural Language** - Add components using simple conversational prompts like "add a login form"
+- **Support for Multiple Registries** - Access public registries, private company libraries, and third-party sources
+
+---
+
+## How It Works
+
+The MCP server acts as a bridge between your AI assistant, component registries and the shadcn CLI.
+
+1. **Registry Connection** - MCP connects to configured registries (shadcn/ui, private registries, third-party sources)
+2. **Natural Language** - You describe what you need in plain English
+3. **AI Processing** - The assistant translates your request into registry commands
+4. **Component Delivery** - Resources are fetched and installed in your project
+
+---
+
+## Supported Registries
+
+The shadcn MCP server works out of the box with any shadcn-compatible registry.
+
+- **shadcn/ui Registry** - The default registry with all shadcn/ui components
+- **Third-Party Registries** - Any registry following the shadcn registry specification
+- **Private Registries** - Your company's internal component libraries
+- **Namespaced Registries** - Multiple registries configured with `@namespace` syntax
+
+---
+
+## Configuration
+
+You can use any MCP client to interact with the shadcn MCP server. Here are the instructions for the most popular ones.
+
+### Claude Code
+
+To use the shadcn MCP server with Claude Code, add the following configuration to your project's `.mcp.json` file:
+
+```json title=".mcp.json" showLineNumbers
+{
+  "mcpServers": {
+    "shadcn": {
+      "command": "npx",
+      "args": ["shadcn@latest", "mcp"]
+    }
+  }
+}
+```
+
+After adding the configuration, restart Claude Code and run `/mcp` to see the shadcn MCP server in the list. If you see `Connected`, you're good to go.
+
+See the [Claude Code MCP documentation](https://docs.anthropic.com/en/docs/claude-code/mcp) for more details.
+
+### Cursor
+
+To configure MCP in Cursor, add the shadcn server to your project's `.cursor/mcp.json` configuration file:
+
+```json title=".cursor/mcp.json" showLineNumbers
+{
+  "mcpServers": {
+    "shadcn": {
+      "command": "npx",
+      "args": ["shadcn@latest", "mcp"]
+    }
+  }
+}
+```
+
+After adding the configuration, enable the shadcn MCP server in Cursor Settings.
+
+Once enabled, you should see a green dot next to the shadcn server in the MCP server list and a list of available tools.
+
+See the [Cursor MCP documentation](https://docs.cursor.com/en/context/mcp#using-mcp-json) for more details.
+
+### VS Code
+
+To configure MCP in VS Code with GitHub Copilot, add the shadcn server to your project's `.vscode/mcp.json` configuration file:
+
+```json title=".vscode/mcp.json" showLineNumbers
+{
+  "mcpServers": {
+    "shadcn": {
+      "command": "npx",
+      "args": ["shadcn@latest", "mcp"]
+    }
+  }
+}
+```
+
+After adding the configuration, open `.vscode/mcp.json` and click **Start** next to the shadcn server.
+
+See the [VS Code MCP documentation](https://code.visualstudio.com/docs/copilot/chat/mcp-servers) for more details.
+
+---
+
+## Configuring Registries
+
+The MCP server supports multiple registries through your project's `components.json` configuration. This allows you to access components from various sources including private registries and third-party providers.
+
+Configure additional registries in your `components.json`:
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@acme": "https://registry.acme.com/{name}.json",
+    "@internal": {
+      "url": "https://internal.company.com/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+<Callout>
+  **Note:** No configuration is needed to access the standard shadcn/ui
+  registry.
+</Callout>
+
+---
+
+## Authentication
+
+For private registries requiring authentication, set environment variables in your `.env.local`:
+
+```bash title=".env.local"
+REGISTRY_TOKEN=your_token_here
+API_KEY=your_api_key_here
+```
+
+For more details on registry authentication, see the [Authentication documentation](/docs/registry/authentication).
+
+---
+
+## Example Prompts
+
+Once the MCP server is configured, you can use natural language to interact with registries. Try one of the following prompts:
+
+### Browse & Search
+
+- Show me all available components in the shadcn registry
+- Find me a login form from the shadcn registry
+
+### Install Items
+
+- Add the button component to my project
+- Create a login form using shadcn components
+- Install the Cursor rules from the acme registry
+
+### Work with Namespaces
+
+- Show me components from acme registry
+- Install @internal/auth-form
+- Build me a landing page using hero, features and testimonials sections from the acme registry
+
+---
+
+## Troubleshooting
+
+### MCP Not Responding
+
+If the MCP server isn't responding to prompts:
+
+1. **Check Configuration** - Verify the MCP server is properly configured and enabled in your MCP client
+2. **Restart MCP Client** - Restart your MCP client after configuration changes
+3. **Verify Installation** - Ensure `shadcn` is installed in your project
+4. **Check Network** - Confirm you can access the configured registries
+
+### Registry Access Issues
+
+If components aren't loading from registries:
+
+1. **Check components.json** - Verify registry URLs are correct
+2. **Test Authentication** - Ensure environment variables are set for private registries
+3. **Verify Registry** - Confirm the registry is online and accessible
+4. **Check Namespace** - Ensure namespace syntax is correct (`@namespace/component`)
+
+### Installation Failures
+
+If components fail to install:
+
+1. **Check Project Setup** - Ensure you have a valid `components.json` file
+2. **Verify Paths** - Confirm the target directories exist
+3. **Check Permissions** - Ensure write permissions for component directories
+4. **Review Dependencies** - Check that required dependencies are installed
+
+### No Tools or Prompts
+
+If you see the `No tools or prompts` message, try the following:
+
+1. **Clear the npx cache** - Run `npx clear-npx-cache`
+2. **Re-enable the MCP server** - Try to re-enable the MCP server in your MCP client
+3. **Check Logs** - In Cursor, you can see the logs under View -> Output and select `MCP: project-*` in the dropdown.
+
+---
+
+## Learn More
+
+- [Registry Documentation](/docs/registry) - Complete guide to shadcn registries
+- [Namespaces](/docs/registry/namespace) - Configure multiple registry sources
+- [Authentication](/docs/registry/authentication) - Secure your private registries
+- [MCP Specification](https://modelcontextprotocol.io) - Learn about Model Context Protocol

apps/v4/content/docs/components/calendar.mdx

@@ -12,9 +12,11 @@ links:
   description="A calendar showing the current date."
 />
 
-## About
+## Blocks
 
-The `Calendar` component is built on top of [React DayPicker](https://react-day-picker.js.org).
+We have built a collection of 30+ calendar blocks that you can use to build your own calendar components.
+
+See all calendar blocks in the [Blocks Library](/blocks/calendar) page.
 
 ## Installation
 
@@ -39,7 +41,7 @@ npx shadcn@latest add calendar
 <Step>Install the following dependencies:</Step>
 
 ```bash
-npm install react-day-picker@8.10.1 date-fns
+npm install react-day-picker date-fns
 ```
 
 <Step>Add the `Button` component to your project.</Step>
@@ -72,19 +74,346 @@ return (
     mode="single"
     selected={date}
     onSelect={setDate}
-    className="rounded-md border"
+    className="rounded-lg border"
   />
 )
 ```
 
 See the [React DayPicker](https://react-day-picker.js.org) documentation for more information.
 
+## About
+
+The `Calendar` component is built on top of [React DayPicker](https://react-day-picker.js.org).
+
+## Customization
+
+See the [React DayPicker](https://react-day-picker.js.org/docs/customization) documentation for more information on how to customize the `Calendar` component.
+
 ## Date Picker
 
 You can use the `<Calendar>` component to build a date picker. See the [Date Picker](/docs/components/date-picker) page for more information.
 
+## Persian / Hijri / Jalali Calendar
+
+To use the Persian calendar, edit `components/ui/calendar.tsx` and replace `react-day-picker` with `react-day-picker/persian`.
+
+```diff
+- import { DayPicker } from "react-day-picker"
++ import { DayPicker } from "react-day-picker/persian"
+```
+
+<ComponentPreview
+  name="calendar-hijri"
+  title="Persian / Hijri / Jalali Calendar"
+  description="A Persian calendar."
+/>
+
 ## Examples
 
+### Range Calendar
+
+<ComponentPreview
+  name="calendar-02"
+  title="Range Calendar"
+  description="A calendar showing the current date and range selection."
+  className="**:[.preview]:h-auto lg:**:[.preview]:h-[450px]"
+/>
+
+### Month and Year Selector
+
+<ComponentPreview
+  name="calendar-13"
+  title="Month and Year Selector"
+  description="A calendar with month and year dropdowns."
+/>
+
+### Date of Birth Picker
+
+<ComponentPreview
+  name="calendar-22"
+  title="Date of Birth Picker"
+  description="A calendar with date of birth picker."
+/>
+
+### Date and Time Picker
+
+<ComponentPreview
+  name="calendar-24"
+  title="Date and Time Picker"
+  description="A calendar with date and time picker."
+/>
+
+### Natural Language Picker
+
+This component uses the `chrono-node` library to parse natural language dates.
+
+<ComponentPreview
+  name="calendar-29"
+  title="Natural Language Picker"
+  description="A calendar with natural language picker."
+/>
+
 ### Form
 
 <ComponentPreview name="calendar-form" />
+
+## Upgrade Guide
+
+### Tailwind v4
+
+If you're already using Tailwind v4, you can upgrade to the latest version of the `Calendar` component by running the following command:
+
+```bash
+npx shadcn@latest add calendar
+```
+
+When you're prompted to overwrite the existing `Calendar` component, select `Yes`. **If you have made any changes to the `Calendar` component, you will need to merge your changes with the new version.**
+
+This will update the `Calendar` component and `react-day-picker` to the latest version.
+
+Next, follow the [React DayPicker](https://daypicker.dev/upgrading) upgrade guide to upgrade your existing components to the latest version.
+
+#### Installing Blocks
+
+After upgrading the `Calendar` component, you can install the new blocks by running the `shadcn@latest add` command.
+
+```bash
+npx shadcn@latest add calendar-02
+```
+
+This will install the latest version of the calendar blocks.
+
+### Tailwind v3
+
+If you're using Tailwind v3, you can upgrade to the latest version of the `Calendar` by copying the following code to your `calendar.tsx` file.
+
+<CodeCollapsibleWrapper>
+
+```tsx showLineNumbers title="components/ui/calendar.tsx"
+"use client"
+
+import * as React from "react"
+import {
+  ChevronDownIcon,
+  ChevronLeftIcon,
+  ChevronRightIcon,
+} from "lucide-react"
+import { DayButton, DayPicker, getDefaultClassNames } from "react-day-picker"
+
+import { cn } from "@/lib/utils"
+import { Button, buttonVariants } from "@/components/ui/button"
+
+function Calendar({
+  className,
+  classNames,
+  showOutsideDays = true,
+  captionLayout = "label",
+  buttonVariant = "ghost",
+  formatters,
+  components,
+  ...props
+}: React.ComponentProps<typeof DayPicker> & {
+  buttonVariant?: React.ComponentProps<typeof Button>["variant"]
+}) {
+  const defaultClassNames = getDefaultClassNames()
+
+  return (
+    <DayPicker
+      showOutsideDays={showOutsideDays}
+      className={cn(
+        "bg-background group/calendar p-3 [--cell-size:2rem] [[data-slot=card-content]_&]:bg-transparent [[data-slot=popover-content]_&]:bg-transparent",
+        String.raw`rtl:**:[.rdp-button\_next>svg]:rotate-180`,
+        String.raw`rtl:**:[.rdp-button\_previous>svg]:rotate-180`,
+        className
+      )}
+      captionLayout={captionLayout}
+      formatters={{
+        formatMonthDropdown: (date) =>
+          date.toLocaleString("default", { month: "short" }),
+        ...formatters,
+      }}
+      classNames={{
+        root: cn("w-fit", defaultClassNames.root),
+        months: cn(
+          "relative flex flex-col gap-4 md:flex-row",
+          defaultClassNames.months
+        ),
+        month: cn("flex w-full flex-col gap-4", defaultClassNames.month),
+        nav: cn(
+          "absolute inset-x-0 top-0 flex w-full items-center justify-between gap-1",
+          defaultClassNames.nav
+        ),
+        button_previous: cn(
+          buttonVariants({ variant: buttonVariant }),
+          "h-[--cell-size] w-[--cell-size] select-none p-0 aria-disabled:opacity-50",
+          defaultClassNames.button_previous
+        ),
+        button_next: cn(
+          buttonVariants({ variant: buttonVariant }),
+          "h-[--cell-size] w-[--cell-size] select-none p-0 aria-disabled:opacity-50",
+          defaultClassNames.button_next
+        ),
+        month_caption: cn(
+          "flex h-[--cell-size] w-full items-center justify-center px-[--cell-size]",
+          defaultClassNames.month_caption
+        ),
+        dropdowns: cn(
+          "flex h-[--cell-size] w-full items-center justify-center gap-1.5 text-sm font-medium",
+          defaultClassNames.dropdowns
+        ),
+        dropdown_root: cn(
+          "has-focus:border-ring border-input shadow-xs has-focus:ring-ring/50 has-focus:ring-[3px] relative rounded-md border",
+          defaultClassNames.dropdown_root
+        ),
+        dropdown: cn("absolute inset-0 opacity-0", defaultClassNames.dropdown),
+        caption_label: cn(
+          "select-none font-medium",
+          captionLayout === "label"
+            ? "text-sm"
+            : "[&>svg]:text-muted-foreground flex h-8 items-center gap-1 rounded-md pl-2 pr-1 text-sm [&>svg]:size-3.5",
+          defaultClassNames.caption_label
+        ),
+        table: "w-full border-collapse",
+        weekdays: cn("flex", defaultClassNames.weekdays),
+        weekday: cn(
+          "text-muted-foreground flex-1 select-none rounded-md text-[0.8rem] font-normal",
+          defaultClassNames.weekday
+        ),
+        week: cn("mt-2 flex w-full", defaultClassNames.week),
+        week_number_header: cn(
+          "w-[--cell-size] select-none",
+          defaultClassNames.week_number_header
+        ),
+        week_number: cn(
+          "text-muted-foreground select-none text-[0.8rem]",
+          defaultClassNames.week_number
+        ),
+        day: cn(
+          "group/day relative aspect-square h-full w-full select-none p-0 text-center [&:first-child[data-selected=true]_button]:rounded-l-md [&:last-child[data-selected=true]_button]:rounded-r-md",
+          defaultClassNames.day
+        ),
+        range_start: cn(
+          "bg-accent rounded-l-md",
+          defaultClassNames.range_start
+        ),
+        range_middle: cn("rounded-none", defaultClassNames.range_middle),
+        range_end: cn("bg-accent rounded-r-md", defaultClassNames.range_end),
+        today: cn(
+          "bg-accent text-accent-foreground rounded-md data-[selected=true]:rounded-none",
+          defaultClassNames.today
+        ),
+        outside: cn(
+          "text-muted-foreground aria-selected:text-muted-foreground",
+          defaultClassNames.outside
+        ),
+        disabled: cn(
+          "text-muted-foreground opacity-50",
+          defaultClassNames.disabled
+        ),
+        hidden: cn("invisible", defaultClassNames.hidden),
+        ...classNames,
+      }}
+      components={{
+        Root: ({ className, rootRef, ...props }) => {
+          return (
+            <div
+              data-slot="calendar"
+              ref={rootRef}
+              className={cn(className)}
+              {...props}
+            />
+          )
+        },
+        Chevron: ({ className, orientation, ...props }) => {
+          if (orientation === "left") {
+            return (
+              <ChevronLeftIcon className={cn("size-4", className)} {...props} />
+            )
+          }
+
+          if (orientation === "right") {
+            return (
+              <ChevronRightIcon
+                className={cn("size-4", className)}
+                {...props}
+              />
+            )
+          }
+
+          return (
+            <ChevronDownIcon className={cn("size-4", className)} {...props} />
+          )
+        },
+        DayButton: CalendarDayButton,
+        WeekNumber: ({ children, ...props }) => {
+          return (
+            <td {...props}>
+              <div className="flex size-[--cell-size] items-center justify-center text-center">
+                {children}
+              </div>
+            </td>
+          )
+        },
+        ...components,
+      }}
+      {...props}
+    />
+  )
+}
+
+function CalendarDayButton({
+  className,
+  day,
+  modifiers,
+  ...props
+}: React.ComponentProps<typeof DayButton>) {
+  const defaultClassNames = getDefaultClassNames()
+
+  const ref = React.useRef<HTMLButtonElement>(null)
+  React.useEffect(() => {
+    if (modifiers.focused) ref.current?.focus()
+  }, [modifiers.focused])
+
+  return (
+    <Button
+      ref={ref}
+      variant="ghost"
+      size="icon"
+      data-day={day.date.toLocaleDateString()}
+      data-selected-single={
+        modifiers.selected &&
+        !modifiers.range_start &&
+        !modifiers.range_end &&
+        !modifiers.range_middle
+      }
+      data-range-start={modifiers.range_start}
+      data-range-end={modifiers.range_end}
+      data-range-middle={modifiers.range_middle}
+      className={cn(
+        "data-[selected-single=true]:bg-primary data-[selected-single=true]:text-primary-foreground data-[range-middle=true]:bg-accent data-[range-middle=true]:text-accent-foreground data-[range-start=true]:bg-primary data-[range-start=true]:text-primary-foreground data-[range-end=true]:bg-primary data-[range-end=true]:text-primary-foreground group-data-[focused=true]/day:border-ring group-data-[focused=true]/day:ring-ring/50 flex aspect-square h-auto w-full min-w-[--cell-size] flex-col gap-1 font-normal leading-none data-[range-end=true]:rounded-md data-[range-middle=true]:rounded-none data-[range-start=true]:rounded-md group-data-[focused=true]/day:relative group-data-[focused=true]/day:z-10 group-data-[focused=true]/day:ring-[3px] [&>span]:text-xs [&>span]:opacity-70",
+        defaultClassNames.day,
+        className
+      )}
+      {...props}
+    />
+  )
+}
+
+export { Calendar, CalendarDayButton }
+```
+
+</CodeCollapsibleWrapper>
+
+**If you have made any changes to the `Calendar` component, you will need to merge your changes with the new version.**
+
+Then follow the [React DayPicker](https://daypicker.dev/upgrading) upgrade guide to upgrade your dependencies and existing components to the latest version.
+
+#### Installing Blocks
+
+After upgrading the `Calendar` component, you can install the new blocks by running the `shadcn@latest add` command.
+
+```bash
+npx shadcn@latest add calendar-02
+```
+
+This will install the latest version of the calendar blocks.

apps/v4/content/docs/components/chart.mdx

@@ -4,9 +4,15 @@ description: Beautiful charts. Built using Recharts. Copy and paste into your ap
 component: true
 ---
 
+<Callout>
+
+**Note:** We're working on upgrading to Recharts v3. In the meantime, if you'd like to start testing v3, see the code in the comment [here](https://github.com/shadcn-ui/ui/issues/7669#issuecomment-2998299159). We'll have an official release soon.
+
+</Callout>
+
 <ComponentPreview
   name="chart-bar-interactive"
-  className="theme-blue -mt-4 [&_.preview]:p-0 [&_.preview]:lg:min-h-[404px] [&_.preview>div]:w-full [&_.preview>div]:border-none [&_.preview>div]:shadow-none"
+  className="theme-blue [&_.preview]:h-auto [&_.preview]:p-0 [&_.preview]:lg:min-h-[404px] [&_.preview>div]:w-full [&_.preview>div]:border-none [&_.preview>div]:shadow-none"
   hideCode
 />
 

apps/v4/content/docs/components/data-table.mdx

@@ -185,7 +185,7 @@ export function DataTable<TData, TValue>({
   })
 
   return (
-    <div className="rounded-md border">
+    <div className="overflow-hidden rounded-md border">
       <Table>
         <TableHeader>
           {table.getHeaderGroups().map((headerGroup) => (
@@ -425,7 +425,7 @@ export function DataTable<TData, TValue>({
 
   return (
     <div>
-      <div className="rounded-md border">
+      <div className="overflow-hidden rounded-md border">
         <Table>
           { // .... }
         </Table>
@@ -499,7 +499,7 @@ export function DataTable<TData, TValue>({
 
   return (
     <div>
-      <div className="rounded-md border">
+      <div className="overflow-hidden rounded-md border">
         <Table>{ ... }</Table>
       </div>
     </div>
@@ -602,7 +602,7 @@ export function DataTable<TData, TValue>({
           className="max-w-sm"
         />
       </div>
-      <div className="rounded-md border">
+      <div className="overflow-hidden rounded-md border">
         <Table>{ ... }</Table>
       </div>
     </div>
@@ -715,7 +715,7 @@ export function DataTable<TData, TValue>({
           </DropdownMenuContent>
         </DropdownMenu>
       </div>
-      <div className="rounded-md border">
+      <div className="overflow-hidden rounded-md border">
         <Table>{ ... }</Table>
       </div>
     </div>
@@ -805,7 +805,7 @@ export function DataTable<TData, TValue>({
 
   return (
     <div>
-      <div className="rounded-md border">
+      <div className="overflow-hidden rounded-md border">
         <Table />
       </div>
     </div>

apps/v4/content/docs/components/date-picker.mdx

@@ -5,8 +5,9 @@ component: true
 ---
 
 <ComponentPreview
-  name="date-picker-demo"
-  description="A date picker in a popover"
+  name="calendar-22"
+  title="Date of Birth Picker"
+  description="A calendar with date of birth picker."
 />
 
 ## Installation
@@ -40,23 +41,16 @@ export function DatePickerDemo() {
     <Popover>
       <PopoverTrigger asChild>
         <Button
-          variant={"outline"}
-          className={cn(
-            "w-[280px] justify-start text-left font-normal",
-            !date && "text-muted-foreground"
-          )}
+          variant="outline"
+          data-empty={!date}
+          className="data-[empty=true]:text-muted-foreground w-[280px] justify-start text-left font-normal"
         >
-          <CalendarIcon className="mr-2 h-4 w-4" />
+          <CalendarIcon />
           {date ? format(date, "PPP") : <span>Pick a date</span>}
         </Button>
       </PopoverTrigger>
       <PopoverContent className="w-auto p-0">
-        <Calendar
-          mode="single"
-          selected={date}
-          onSelect={setDate}
-          initialFocus
-        />
+        <Calendar mode="single" selected={date} onSelect={setDate} />
       </PopoverContent>
     </Popover>
   )
@@ -67,25 +61,38 @@ See the [React DayPicker](https://react-day-picker.js.org) documentation for mor
 
 ## Examples
 
-### Date Picker
+### Date of Birth Picker
 
 <ComponentPreview
-  name="date-picker-demo"
-  description="A date picker in a popover"
+  name="calendar-22"
+  title="Date of Birth Picker"
+  description="A calendar with date of birth picker."
 />
 
-### Date Range Picker
+### Picker with Input
 
 <ComponentPreview
-  name="date-picker-with-range"
-  description="A date range picker"
+  name="calendar-28"
+  title="Picker with Input"
+  description="A calendar with input and picker."
 />
 
-### With Presets
+### Date and Time Picker
 
 <ComponentPreview
-  name="date-picker-with-presets"
-  description="A date picker with presets"
+  name="calendar-24"
+  title="Date and Time Picker"
+  description="A calendar with date and time picker."
+/>
+
+### Natural Language Picker
+
+This component uses the `chrono-node` library to parse natural language dates.
+
+<ComponentPreview
+  name="calendar-29"
+  title="Natural Language Picker"
+  description="A calendar with natural language picker."
 />
 
 ### Form

apps/v4/content/docs/dark-mode/vite.mdx

@@ -5,7 +5,7 @@ description: Adding dark mode to your vite app.
 
 ## Create a theme provider
 
-```tsx title="components/theme-provider.tsx"
+```tsx title="components/theme-provider.tsx" showLineNumbers
 import { createContext, useContext, useEffect, useState } from "react"
 
 type Theme = "dark" | "light" | "system"
@@ -85,7 +85,7 @@ export const useTheme = () => {
 
 Add the `ThemeProvider` to your root layout.
 
-```tsx {1,5-7} title="App.tsx"
+```tsx {1,5-7} title="App.tsx" showLineNumbers
 import { ThemeProvider } from "@/components/theme-provider"
 
 function App() {
@@ -103,7 +103,7 @@ export default App
 
 Place a mode toggle on your site to toggle between light and dark mode.
 
-```tsx title="components/mode-toggle.tsx"
+```tsx title="components/mode-toggle.tsx" showLineNumbers
 import { Moon, Sun } from "lucide-react"
 
 import { Button } from "@/components/ui/button"

apps/v4/content/docs/registry/authentication.mdx

@@ -0,0 +1,399 @@
+---
+title: Authentication
+description: Secure your registry with authentication for private and personalized components.
+---
+
+Authentication lets you run private registries, control who can access your components, and give different teams or users different content. This guide shows common authentication patterns and how to set them up.
+
+Authentication enables these use cases:
+
+- **Private Components**: Keep your business logic and internal components secure
+- **Team-Specific Resources**: Give different teams different components
+- **Access Control**: Limit who can see sensitive or experimental components
+- **Usage Analytics**: See who's using which components in your organization
+- **Licensing**: Control who gets premium or licensed components
+
+## Common Authentication Patterns
+
+### Token-Based Authentication
+
+The most common approach uses Bearer tokens or API keys:
+
+```json title="components.json"
+{
+  "registries": {
+    "@private": {
+      "url": "https://registry.company.com/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+Set your token in environment variables:
+
+```bash title=".env.local"
+REGISTRY_TOKEN=your_secret_token_here
+```
+
+### API Key Authentication
+
+Some registries use API keys in headers:
+
+```json title="components.json"
+{
+  "registries": {
+    "@company": {
+      "url": "https://api.company.com/registry/{name}.json",
+      "headers": {
+        "X-API-Key": "${API_KEY}",
+        "X-Workspace-Id": "${WORKSPACE_ID}"
+      }
+    }
+  }
+}
+```
+
+### Query Parameter Authentication
+
+For simpler setups, use query parameters:
+
+```json title="components.json"
+{
+  "registries": {
+    "@internal": {
+      "url": "https://registry.company.com/{name}.json",
+      "params": {
+        "token": "${ACCESS_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+This creates: `https://registry.company.com/button.json?token=your_token`
+
+## Server-Side Implementation
+
+Here's how to add authentication to your registry server:
+
+### Next.js API Route Example
+
+```typescript title="app/api/registry/[name]/route.ts"
+import { NextRequest, NextResponse } from "next/server"
+
+export async function GET(
+  request: NextRequest,
+  { params }: { params: { name: string } }
+) {
+  // Get token from Authorization header.
+  const authHeader = request.headers.get("authorization")
+  const token = authHeader?.replace("Bearer ", "")
+
+  // Or from query parameters.
+  const queryToken = request.nextUrl.searchParams.get("token")
+
+  // Check if token is valid.
+  if (!isValidToken(token || queryToken)) {
+    return NextResponse.json({ error: "Unauthorized" }, { status: 401 })
+  }
+
+  // Check if token can access this component.
+  if (!hasAccessToComponent(token, params.name)) {
+    return NextResponse.json({ error: "Forbidden" }, { status: 403 })
+  }
+
+  // Return the component.
+  const component = await getComponent(params.name)
+  return NextResponse.json(component)
+}
+
+function isValidToken(token: string | null) {
+  // Add your token validation logic here.
+  // Check against database, JWT validation, etc.
+  return token === process.env.VALID_TOKEN
+}
+
+function hasAccessToComponent(token: string, componentName: string) {
+  // Add role-based access control here.
+  // Check if token can access specific component.
+  return true // Your logic here.
+}
+```
+
+### Express.js Example
+
+```javascript title="server.js"
+app.get("/registry/:name.json", (req, res) => {
+  const token = req.headers.authorization?.replace("Bearer ", "")
+
+  if (!isValidToken(token)) {
+    return res.status(401).json({ error: "Unauthorized" })
+  }
+
+  const component = getComponent(req.params.name)
+  if (!component) {
+    return res.status(404).json({ error: "Component not found" })
+  }
+
+  res.json(component)
+})
+```
+
+## Advanced Authentication Patterns
+
+### Team-Based Access
+
+Give different teams different components:
+
+```typescript title="api/registry/route.ts"
+async function GET(request: NextRequest) {
+  const token = extractToken(request)
+  const team = await getTeamFromToken(token)
+
+  // Get components for this team.
+  const components = await getComponentsForTeam(team)
+  return NextResponse.json(components)
+}
+```
+
+### User-Personalized Registries
+
+Give users components based on their preferences:
+
+```typescript
+async function GET(request: NextRequest) {
+  const user = await authenticateUser(request)
+
+  // Get user's style and framework preferences.
+  const preferences = await getUserPreferences(user.id)
+
+  // Get personalized component version.
+  const component = await getPersonalizedComponent(params.name, preferences)
+
+  return NextResponse.json(component)
+}
+```
+
+### Temporary Access Tokens
+
+Use expiring tokens for better security:
+
+```typescript
+interface TemporaryToken {
+  token: string
+  expiresAt: Date
+  scope: string[]
+}
+
+async function validateTemporaryToken(token: string) {
+  const tokenData = await getTokenData(token)
+
+  if (!tokenData) return false
+  if (new Date() > tokenData.expiresAt) return false
+
+  return true
+}
+```
+
+## Multi-Registry Authentication
+
+With [namespaced registries](/docs/registry/namespace), you can set up multiple registries with different authentication:
+
+```json title="components.json"
+{
+  "registries": {
+    "@public": "https://public.company.com/{name}.json",
+    "@internal": {
+      "url": "https://internal.company.com/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${INTERNAL_TOKEN}"
+      }
+    },
+    "@premium": {
+      "url": "https://premium.company.com/{name}.json",
+      "headers": {
+        "X-License-Key": "${LICENSE_KEY}"
+      }
+    }
+  }
+}
+```
+
+This lets you:
+
+- Mix public and private registries
+- Use different authentication per registry
+- Organize components by access level
+
+## Security Best Practices
+
+### Use Environment Variables
+
+Never commit tokens to version control. Always use environment variables:
+
+```bash title=".env.local"
+REGISTRY_TOKEN=your_secret_token_here
+API_KEY=your_api_key_here
+```
+
+Then reference them in `components.json`:
+
+```json
+{
+  "registries": {
+    "@private": {
+      "url": "https://registry.company.com/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+### Use HTTPS
+
+Always use HTTPS URLs for registries to protect your tokens in transit:
+
+```json
+{
+  "@secure": "https://registry.company.com/{name}.json" // ✅
+  "@insecure": "http://registry.company.com/{name}.json" // ❌
+}
+```
+
+### Add Rate Limiting
+
+Protect your registry from abuse:
+
+```typescript
+import rateLimit from "express-rate-limit"
+
+const limiter = rateLimit({
+  windowMs: 15 * 60 * 1000, // 15 minutes
+  max: 100, // limit each IP to 100 requests per windowMs
+})
+
+app.use("/registry", limiter)
+```
+
+### Rotate Tokens
+
+Change access tokens regularly:
+
+```typescript
+// Create new token with expiration.
+function generateToken() {
+  const token = crypto.randomBytes(32).toString("hex")
+  const expiresAt = new Date(Date.now() + 30 * 24 * 60 * 60 * 1000) // 30 days.
+
+  return { token, expiresAt }
+}
+```
+
+### Log Access
+
+Track registry access for security and analytics:
+
+```typescript
+async function logAccess(request: Request, component: string, userId: string) {
+  await db.accessLog.create({
+    timestamp: new Date(),
+    userId,
+    component,
+    ip: request.ip,
+    userAgent: request.headers["user-agent"],
+  })
+}
+```
+
+## Testing Authentication
+
+Test your authenticated registry locally:
+
+```bash
+# Test with curl.
+curl -H "Authorization: Bearer your_token" \
+  https://registry.company.com/button.json
+
+# Test with the CLI.
+REGISTRY_TOKEN=your_token npx shadcn@latest add @private/button
+```
+
+## Error Handling
+
+The shadcn CLI handles authentication errors gracefully:
+
+- **401 Unauthorized**: Token is invalid or missing
+- **403 Forbidden**: Token lacks permission for this resource
+- **429 Too Many Requests**: Rate limit exceeded
+
+### Custom Error Messages
+
+Your registry server can return custom error messages in the response body, and the CLI will display them to users:
+
+```typescript
+// Registry server returns custom error
+return NextResponse.json(
+  {
+    error: "Unauthorized",
+    message:
+      "Your subscription has expired. Please renew at company.com/billing",
+  },
+  { status: 403 }
+)
+```
+
+The user will see:
+
+```txt
+Your subscription has expired. Please renew at company.com/billing
+```
+
+This helps provide context-specific guidance:
+
+```typescript
+// Different error messages for different scenarios
+if (!token) {
+  return NextResponse.json(
+    {
+      error: "Unauthorized",
+      message:
+        "Authentication required. Set REGISTRY_TOKEN in your .env.local file",
+    },
+    { status: 401 }
+  )
+}
+
+if (isExpiredToken(token)) {
+  return NextResponse.json(
+    {
+      error: "Unauthorized",
+      message: "Token expired. Request a new token at company.com/tokens",
+    },
+    { status: 401 }
+  )
+}
+
+if (!hasTeamAccess(token, component)) {
+  return NextResponse.json(
+    {
+      error: "Forbidden",
+      message: `Component '${component}' is restricted to the Design team`,
+    },
+    { status: 403 }
+  )
+}
+```
+
+## Next Steps
+
+To set up authentication with multiple registries and advanced patterns, see the [Namespaced Registries](/docs/registry/namespace) documentation. It covers:
+
+- Setting up multiple authenticated registries
+- Using different authentication per namespace
+- Cross-registry dependency resolution
+- Advanced authentication patterns

apps/v4/content/docs/registry/examples.mdx

@@ -328,6 +328,157 @@ Add custom theme variables to the `theme` object.
 }
 ```
 
+## Add CSS imports
+
+Use `@import` to add CSS imports to your registry item. The imports will be placed at the top of the CSS file.
+
+### Basic import
+
+```json title="example-import.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "custom-import",
+  "type": "registry:component",
+  "css": {
+    "@import \"tailwindcss\"": {},
+    "@import \"./styles/base.css\"": {}
+  }
+}
+```
+
+### Import with url() syntax
+
+```json title="example-url-import.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "font-import",
+  "type": "registry:item",
+  "css": {
+    "@import url(\"https://fonts.googleapis.com/css2?family=Inter:wght@400;500;600&display=swap\")": {},
+    "@import url('./local-styles.css')": {}
+  }
+}
+```
+
+### Import with media queries
+
+```json title="example-media-import.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "responsive-import",
+  "type": "registry:item",
+  "css": {
+    "@import \"print-styles.css\" print": {},
+    "@import url(\"mobile.css\") screen and (max-width: 768px)": {}
+  }
+}
+```
+
+## Add custom plugins
+
+Use `@plugin` to add Tailwind plugins to your registry item. Plugins will be automatically placed after imports and before other content.
+
+**Important:** When using plugins from npm packages, you must also add them to the `dependencies` array.
+
+### Basic plugin usage
+
+```json title="example-plugin.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "custom-plugin",
+  "type": "registry:item",
+  "css": {
+    "@plugin \"@tailwindcss/typography\"": {},
+    "@plugin \"foo\"": {}
+  }
+}
+```
+
+### Plugin with npm dependency
+
+When using plugins from npm packages like `@tailwindcss/typography`, include them in the dependencies.
+
+```json title="example-typography.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "typography-component",
+  "type": "registry:item",
+  "dependencies": ["@tailwindcss/typography"],
+  "css": {
+    "@plugin \"@tailwindcss/typography\"": {},
+    "@layer components": {
+      ".prose": {
+        "max-width": "65ch"
+      }
+    }
+  }
+}
+```
+
+### Scoped and file-based plugins
+
+```json title="example-scoped-plugin.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "scoped-plugins",
+  "type": "registry:component",
+  "css": {
+    "@plugin \"@headlessui/tailwindcss\"": {},
+    "@plugin \"tailwindcss/plugin\"": {},
+    "@plugin \"./custom-plugin.js\"": {}
+  }
+}
+```
+
+### Multiple plugins with automatic ordering
+
+When you add multiple plugins, they are automatically grouped together and deduplicated.
+
+```json title="example-multiple-plugins.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "multiple-plugins",
+  "type": "registry:item",
+  "dependencies": [
+    "@tailwindcss/typography",
+    "@tailwindcss/forms",
+    "tw-animate-css"
+  ],
+  "css": {
+    "@plugin \"@tailwindcss/typography\"": {},
+    "@plugin \"@tailwindcss/forms\"": {},
+    "@plugin \"tw-animate-css\"": {}
+  }
+}
+```
+
+## Combined imports and plugins
+
+When using both `@import` and `@plugin` directives, imports are placed first, followed by plugins, then other CSS content.
+
+```json title="example-combined.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "combined-example",
+  "type": "registry:item",
+  "dependencies": ["@tailwindcss/typography", "tw-animate-css"],
+  "css": {
+    "@import \"tailwindcss\"": {},
+    "@import url(\"https://fonts.googleapis.com/css2?family=Inter:wght@400;500;600&display=swap\")": {},
+    "@plugin \"@tailwindcss/typography\"": {},
+    "@plugin \"tw-animate-css\"": {},
+    "@layer base": {
+      "body": {
+        "font-family": "Inter, sans-serif"
+      }
+    },
+    "@utility content-auto": {
+      "content-visibility": "auto"
+    }
+  }
+}
+```
+
 ## Add custom animations
 
 Note: you need to define both `@keyframes` in css and `theme` in cssVars to use animations.
@@ -354,3 +505,95 @@ Note: you need to define both `@keyframes` in css and `theme` in cssVars to use
   }
 }
 ```
+
+## Add environment variables
+
+You can add environment variables using the `envVars` field.
+
+```json title="example-item.json" showLineNumbers {5-9}
+{»
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "custom-item",
+  "type": "registry:item",
+  "envVars": {
+    "NEXT_PUBLIC_APP_URL": "http://localhost:4000",
+    "DATABASE_URL": "postgresql://postgres:postgres@localhost:5432/postgres",
+    "OPENAI_API_KEY": ""
+  }
+}
+```
+
+Environment variables are added to the `.env.local` or `.env` file. Existing variables are not overwritten.
+
+<Callout>
+
+**IMPORTANT:** Use `envVars` to add development or example variables. Do NOT use it to add production variables.
+
+</Callout>
+
+## Universal Items
+
+As of `2.9.0`, you can create universal items that can be installed without framework detection or components.json.
+
+To make an item universal i.e framework agnostic, all the files in the item must have an explicit target.
+
+Here's an example of a registry item that installs custom Cursor rules for _python_:
+
+```json title=".cursor/rules/custom-python.mdc" showLineNumbers {9}
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "python-rules",
+  "type": "registry:item",
+  "files": [
+    {
+      "path": "/path/to/your/registry/default/custom-python.mdc",
+      "type": "registry:file",
+      "target": "~/.cursor/rules/custom-python.mdc",
+      "content": "..."
+    }
+  ]
+}
+```
+
+Here's another example for installation custom ESLint config:
+
+```json title=".eslintrc.json" showLineNumbers {9}
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "my-eslint-config",
+  "type": "registry:item",
+  "files": [
+    {
+      "path": "/path/to/your/registry/default/custom-eslint.json",
+      "type": "registry:file",
+      "target": "~/.eslintrc.json",
+      "content": "..."
+    }
+  ]
+}
+```
+
+You can also have a universal item that installs multiple files:
+
+```json title="my-custom-starter-template.json" showLineNumbers {9}
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "my-custom-start-template",
+  "type": "registry:item",
+  dependencies: ["better-auth"]
+  "files": [
+    {
+      "path": "/path/to/file-01.json",
+      "type": "registry:file",
+      "target": "~/file-01.json",
+      "content": "..."
+    },
+    {
+      "path": "/path/to/file-02.vue",
+      "type": "registry:file",
+      "target": "~/pages/file-02.vue",
+      "content": "..."
+    }
+  ]
+}
+```

apps/v4/content/docs/registry/getting-started.mdx

@@ -3,23 +3,27 @@ title: Getting Started
 description: Learn how to get setup and run your own component registry.
 ---
 
-This guide will walk you through the process of setting up your own component registry.
-
-It assumes you already have a project with components and would like to turn it into a registry.
+This guide will walk you through the process of setting up your own component registry. It assumes you already have a project with components and would like to turn it into a registry.
 
 If you're starting a new registry project, you can use the [registry template](https://github.com/shadcn-ui/registry-template) as a starting point. We have already configured it for you.
 
+## Requirements
+
+You are free to design and host your custom registry as you see fit. The only requirement is that your registry items must be valid JSON files that conform to the [registry-item schema specification](/docs/registry/registry-item-json).
+
+If you'd like to see an example of a registry, we have a [template project](https://github.com/shadcn-ui/registry-template) for you to use as a starting point.
+
 ## registry.json
 
-The `registry.json` file is only required if you're using the `shadcn` CLI to build your registry.
+The `registry.json` is the entry point for the registry. It contains the registry's name, homepage, and defines all the items present in the registry.
 
-If you're using a different build system, you can skip this step as long as your build system produces valid JSON files that conform to the [registry-item schema specification](/docs/registry/registry-item-json).
+Your registry must have this file (or JSON payload) present at the root of the registry endpoint. The registry endpoint is the URL where your registry is hosted.
 
-<Steps>
+The `shadcn` CLI will automatically generate this file for you when you run the `build` command.
 
-### Add a registry.json file
+## Add a registry.json file
 
-Create a `registry.json` file in the root of your project. Your project can be a Next.js, Remix, Vite, or any other project that supports React.
+Create a `registry.json` file in the root of your project. Your project can be a Next.js, Vite, Vue, Svelte, PHP or any other framework as long as it supports serving JSON over HTTP.
 
 ```json title="registry.json" showLineNumbers
 {
@@ -34,12 +38,8 @@ Create a `registry.json` file in the root of your project. Your project can be a
 
 This `registry.json` file must conform to the [registry schema specification](/docs/registry/registry-json).
 
-</Steps>
-
 ## Add a registry item
 
-<Steps>
-
 ### Create your component
 
 Add your first component. Here's an example of a simple `<HelloWorld />` component:
@@ -98,16 +98,10 @@ For every file you add, you must specify the `path` and `type` of the file. The
 
 You can read more about the registry item schema and file types in the [registry item schema docs](/docs/registry/registry-item-json).
 
-</Steps>
-
 ## Build your registry
 
-<Steps>
-
 ### Install the shadcn CLI
 
-Note: the `build` command is currently only available in the `shadcn@canary` version of the CLI.
-
 ```bash
 npm install shadcn@canary
 ```
@@ -140,8 +134,6 @@ You can change the output directory by passing the `--output` option. See the [s
 
 </Callout>
 
-</Steps>
-
 ## Serve your registry
 
 If you're running your registry on Next.js, you can now serve your registry by running the `next` server. The command might differ for other frameworks.
@@ -156,24 +148,13 @@ Your files will now be served at `http://localhost:3000/r/[NAME].json` eg. `http
 
 To make your registry available to other developers, you can publish it by deploying your project to a public URL.
 
-## Adding Auth
-
-The `shadcn` CLI does not offer a built-in way to add auth to your registry. We recommend handling authorization on your registry server.
-
-A common simple approach is to use a `token` query parameter to authenticate requests to your registry. e.g. `http://localhost:3000/r/hello-world.json?token=[SECURE_TOKEN_HERE]`.
-
-Use the secure token to authenticate requests and return a 401 Unauthorized response if the token is invalid. Both the `shadcn` CLI and `Open in v0` will handle the 401 response and display a message to the user.
-
-<Callout className="mt-6">
-  **Note:** Make sure to encrypt and expire tokens.
-</Callout>
-
 ## Guidelines
 
 Here are some guidelines to follow when building components for a registry.
 
 - Place your registry item in the `registry/[STYLE]/[NAME]` directory. I'm using `new-york` as an example. It can be anything you want as long as it's nested under the `registry` directory.
 - The following properties are required for the block definition: `name`, `description`, `type` and `files`.
+- It is recommended to add a proper name and description to your registry item. This helps LLMs understand the component and its purpose.
 - Make sure to list all registry dependencies in `registryDependencies`. A registry dependency is the name of the component in the registry eg. `input`, `button`, `card`, etc or a URL to a registry item eg. `http://localhost:3000/r/editor.json`.
 - Make sure to list all dependencies in `dependencies`. A dependency is the name of the package in the registry eg. `zod`, `sonner`, etc. To set a version, you can use the `name@version` format eg. `zod@^3.20.0`.
 - **Imports should always use the `@/registry` path.** eg. `import { HelloWorld } from "@/registry/new-york/hello-world/hello-world"`
@@ -186,3 +167,7 @@ To install a registry item using the `shadcn` CLI, use the `add` command followe
 ```bash
 npx shadcn@latest add http://localhost:3000/r/hello-world.json
 ```
+
+See the [Namespaced
+Registries](/docs/registry/namespace) docs for more information on
+how to install registry items from a namespaced registry.

apps/v4/content/docs/registry/index.mdx

@@ -1,16 +1,15 @@
 ---
-title: Registry
-description: Run your own component registry.
+title: Introduction
+description: Run your own code registry.
 ---
 
+You can use the `shadcn` CLI to run your own code registry. Running your own registry allows you to distribute your custom components, hooks, pages, config, rules and other files to any project.
+
 <Callout>
-  **Note:** This feature is currently experimental. Help us improve it by
-  testing it out and sending feedback. If you have any questions, please [reach
-  out to us](https://github.com/shadcn-ui/ui/discussions).
+  **Note:** The registry works with any project type and any framework, and is
+  not limited to React.
 </Callout>
 
-You can use the `shadcn` CLI to run your own component registry. Running your own registry allows you to distribute your custom components, hooks, pages, and other files to any React project.
-
 <figure className="flex flex-col gap-4">
   <Image
     src="/images/registry-light.png"
@@ -27,14 +26,54 @@ You can use the `shadcn` CLI to run your own component registry. Running your ow
     className="mt-6 hidden w-full overflow-hidden rounded-lg border shadow-sm dark:block"
   />
   <figcaption className="text-center text-sm text-gray-500">
-    Distribute code to any React project.
+    A distribution system for code
   </figcaption>
 </figure>
 
-Registry items are automatically compatible with the `shadcn` CLI and `Open in v0`.
+Ready to create your own registry? In the next section, we'll walk you through setting up your own custom registry step-by-step, from creating your first component to publishing it for others to use.
 
-## Requirements
+<div className="mt-6 grid gap-4 sm:grid-cols-2">
+  <LinkedCard href="/docs/registry/getting-started" className="items-start text-sm md:p-6">
+    <div className="font-medium">Getting Started</div>
+    <div className="text-muted-foreground">
+      Set up and build your own registry
+    </div>
+  </LinkedCard>
 
-You are free to design and host your custom registry as you see fit. The only requirement is that your registry items must be valid JSON files that conform to the [registry-item schema specification](/docs/registry/registry-item-json).
-
-If you'd like to see an example of a registry, we have a [template project](https://github.com/shadcn-ui/registry-template) for you to use as a starting point.
+<LinkedCard
+  href="/docs/registry/authentication"
+  className="items-start text-sm md:p-6"
+>
+  <div className="font-medium">Authentication</div>
+  <div className="text-muted-foreground">
+    Secure your registry with authentication
+  </div>
+</LinkedCard>
+<LinkedCard
+  href="/docs/registry/namespace"
+  className="items-start text-sm md:p-6"
+>
+  <div className="font-medium">Namespaces</div>
+  <div className="text-muted-foreground">
+    Configure registries with namespaces
+  </div>
+</LinkedCard>
+<LinkedCard
+  href="/docs/registry/examples"
+  className="items-start text-sm md:p-6"
+>
+  <div className="font-medium">Examples</div>
+  <div className="text-muted-foreground">
+    Registry item examples and configurations
+  </div>
+</LinkedCard>
+  <LinkedCard
+    href="/docs/registry/registry-json"
+    className="items-start text-sm md:p-6"
+  >
+    <div className="font-medium">Schema</div>
+    <div className="text-muted-foreground">
+      Schema specification for registry.json
+    </div>
+  </LinkedCard>
+</div>

apps/v4/content/docs/registry/mcp.mdx

@@ -0,0 +1,109 @@
+---
+title: MCP Server
+description: MCP support for registry developers
+---
+
+The [shadcn MCP server](/docs/mcp) works out of the box with any shadcn-compatible registry. You do not need to do anything special to enable MCP support for your registry.
+
+---
+
+## Prerequisites
+
+The MCP server works by requesting your registry index. Make sure you have a registry item file at the root of your registry named `registry`.
+
+For example, if your registry is hosted at `https://acme.com/r/[name].json`, you should have a file at `https://acme.com/r/registry.json` or `https://acme.com/r/registry` if you're using a JSON file extension.
+
+This file must be a valid JSON file that conforms to the [registry schema](/docs/registry/registry-json).
+
+---
+
+## Configuring MCP
+
+Ask your registry consumers to configure your registry in their `components.json` file and install the shadcn MCP server:
+
+<Tabs defaultValue="claude">
+  <TabsList>
+    <TabsTrigger value="claude">Claude Code</TabsTrigger>
+    <TabsTrigger value="cursor">Cursor</TabsTrigger>
+    <TabsTrigger value="vscode">VS Code</TabsTrigger>
+  </TabsList>
+  <TabsContent value="claude" className="mt-4">
+    **Configure your registry** in your `components.json` file:
+
+    ```json title="components.json" showLineNumbers
+    {
+      "registries": {
+        "@acme": "https://acme.com/r/{name}.json"
+      }
+    }
+    ```
+
+    **Run the following command** in your project:
+
+    ```bash
+    npx shadcn@latest mcp init --client claude
+    ```
+
+    **Restart Claude Code** and try the following prompts:
+       - Show me the components in the acme registry
+       - Create a landing page using items from the acme registry
+
+    **Note:** You can use `/mcp` command in Claude Code to debug the MCP server.
+
+  </TabsContent>
+
+  <TabsContent value="cursor" className="mt-4">
+    **Configure your registry** in your `components.json` file:
+
+    ```json title="components.json" showLineNumbers
+    {
+      "registries": {
+        "@acme": "https://acme.com/r/{name}.json"
+      }
+    }
+    ```
+    **Run the following command** in your project:
+       ```bash
+       npx shadcn@latest mcp init --client cursor
+       ```
+
+    Open **Cursor Settings** and **Enable the MCP server** for shadcn. Then try the following prompts:
+       - Show me the components in the acme registry
+       - Create a landing page using items from the acme registry
+
+  </TabsContent>
+
+  <TabsContent value="vscode" className="mt-4">
+    **Configure your registry** in your `components.json` file:
+
+    ```json title="components.json" showLineNumbers
+    {
+      "registries": {
+        "@acme": "https://acme.com/r/{name}.json"
+      }
+    }
+    ```
+    **Run the following command** in your project:
+       ```bash
+       npx shadcn@latest mcp init --client vscode
+       ```
+
+    Open `.vscode/mcp.json` and click **Start** next to the shadcn server. Then try the following prompts with GitHub Copilot:
+       - Show me the components in the acme registry
+       - Create a landing page using items from the acme registry
+
+  </TabsContent>
+</Tabs>
+
+You can read more about the MCP server in the [MCP documentation](/docs/mcp).
+
+---
+
+## Best Practices
+
+Here are some best practices for MCP-compatible registries:
+
+1. **Clear Descriptions**: Add concise, informative descriptions that help AI assistants understand what a registry item is for and how to use it.
+2. **Proper Dependencies**: List all `dependencies` accurately so MCP can install them automatically.
+3. **Registry Dependencies**: Use `registryDependencies` to indicate relationships between items.
+4. **Consistent Naming**: Use kebab-case for component names and maintain consistency across your registry.

apps/v4/content/docs/registry/meta.json

@@ -1,10 +1,14 @@
 {
+  "title": "Registry",
   "pages": [
     "index",
     "getting-started",
-    "faq",
-    "open-in-v0",
+    "namespace",
+    "authentication",
     "examples",
+    "mcp",
+    "registry-index",
+    "open-in-v0",
     "registry-json",
     "registry-item-json"
   ]

apps/v4/content/docs/registry/namespace.mdx

@@ -0,0 +1,913 @@
+---
+title: Namespaces
+description: Configure and use multiple resource registries with namespace support.
+---
+
+Namespaced registries let you configure multiple resource sources in one project. This means you can install components, libraries, utilities, AI prompts, configuration files, and other resources from various registries, whether they're public, third-party, or your own custom private libraries.
+
+## Table of Contents
+
+- [Overview](#overview)
+- [Decentralized Namespace System](#decentralized-namespace-system)
+- [Getting Started](#getting-started)
+- [Registry Naming Convention](#registry-naming-convention)
+- [Configuration](#configuration)
+- [Authentication & Security](#authentication--security)
+- [Versioning](#versioning)
+- [Dependency Resolution](#dependency-resolution)
+- [Built-in Registries](#built-in-registries)
+- [CLI Commands](#cli-commands)
+- [Error Handling](#error-handling)
+- [Creating Your Own Registry](#creating-your-own-registry)
+- [Example Configurations](#example-configurations)
+- [Technical Details](#technical-details)
+- [Best Practices](#best-practices)
+- [Troubleshooting](#troubleshooting)
+
+---
+
+## Overview
+
+Registry namespaces are prefixed with `@` and provide a way to organize and reference resources from different sources. Resources can be any type of content: components, libraries, utilities, hooks, AI prompts, configuration files, themes, and more. For example:
+
+- `@shadcn/button` - UI component from the shadcn registry
+- `@v0/dashboard` - Dashboard component from the v0 registry
+- `@ai-elements/input` - AI prompt input from an AI elements registry
+- `@acme/auth-utils` - Authentication utilities from your company's private registry
+- `@ai/chatbot-rules` - AI prompt rules from an AI resources registry
+- `@themes/dark-mode` - Theme configuration from a themes registry
+
+---
+
+## Decentralized Namespace System
+
+We intentionally designed the namespace system to be decentralized. There is a [central open source registry index](/docs/registry/registry-index) for open source namespaces but you are free to create and use any namespace you want.
+
+This decentralized approach gives you complete flexibility to organize your resources however makes sense for your organization.
+
+You can create multiple registries for different purposes:
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@acme-ui": "https://registry.acme.com/ui/{name}.json",
+    "@acme-docs": "https://registry.acme.com/docs/{name}.json",
+    "@acme-ai": "https://registry.acme.com/ai/{name}.json",
+    "@acme-themes": "https://registry.acme.com/themes/{name}.json",
+    "@acme-internal": {
+      "url": "https://internal.acme.com/registry/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${INTERNAL_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+This allows you to:
+
+- **Organize by type**: Separate UI components, documentation, AI resources, etc.
+- **Organize by team**: Different teams can maintain their own registries
+- **Organize by visibility**: Public vs. private resources
+- **Organize by version**: Stable vs. experimental registries
+- **No naming conflicts**: Since there's no central authority, you don't need to worry about namespace collisions
+
+### Examples of Multi-Registry Setups
+
+#### By Resource Type
+
+```json title="components.json" showLineNumbers
+{
+  "@components": "https://cdn.company.com/components/{name}.json",
+  "@hooks": "https://cdn.company.com/hooks/{name}.json",
+  "@utils": "https://cdn.company.com/utils/{name}.json",
+  "@prompts": "https://cdn.company.com/ai-prompts/{name}.json"
+}
+```
+
+#### By Team or Department
+
+```json title="components.json" showLineNumbers
+{
+  "@design": "https://design.company.com/registry/{name}.json",
+  "@engineering": "https://eng.company.com/registry/{name}.json",
+  "@marketing": "https://marketing.company.com/registry/{name}.json"
+}
+```
+
+#### By Stability
+
+```json title="components.json" showLineNumbers
+{
+  "@stable": "https://registry.company.com/stable/{name}.json",
+  "@latest": "https://registry.company.com/beta/{name}.json",
+  "@experimental": "https://registry.company.com/experimental/{name}.json"
+}
+```
+
+---
+
+## Getting Started
+
+### Installing Resources
+
+Once configured, you can install resources using the namespace syntax:
+
+```bash
+npx shadcn@latest add @v0/dashboard
+```
+
+or multiple resources at once:
+
+```bash
+npx shadcn@latest add @acme/header @lib/auth-utils @ai/chatbot-rules
+```
+
+### Quick Configuration
+
+Add registries to your `components.json`:
+
+```json title="components.json"
+{
+  "registries": {
+    "@v0": "https://v0.dev/chat/b/{name}",
+    "@acme": "https://registry.acme.com/resources/{name}.json"
+  }
+}
+```
+
+Then start installing:
+
+```bash
+npx shadcn@latest add @acme/button
+```
+
+---
+
+## Registry Naming Convention
+
+Registry names must follow these rules:
+
+- Start with `@` symbol
+- Contain only alphanumeric characters, hyphens, and underscores
+- Examples of valid names: `@v0`, `@acme-ui`, `@my_company`
+
+The pattern for referencing resources is: `@namespace/resource-name`
+
+---
+
+## Configuration
+
+Namespaced registries are configured in your `components.json` file under the `registries` field.
+
+### Basic Configuration
+
+The simplest way to configure a registry is with a URL template string:
+
+```json title="components.json"
+{
+  "registries": {
+    "@v0": "https://v0.dev/chat/b/{name}",
+    "@acme": "https://registry.acme.com/resources/{name}.json",
+    "@lib": "https://lib.company.com/utilities/{name}",
+    "@ai": "https://ai-resources.com/r/{name}.json"
+  }
+}
+```
+
+> **Note:** The `{name}` placeholder in the URL is automatically parsed and replaced with the resource name when you run `npx shadcn@latest add @namespace/resource-name`. For example, `@acme/button` becomes `https://registry.acme.com/resources/button.json`. See [URL Pattern System](#url-pattern-system) for more details.
+
+### Advanced Configuration
+
+For registries that require authentication or additional parameters, use the object format:
+
+```json title="components.json"
+{
+  "registries": {
+    "@private": {
+      "url": "https://api.company.com/registry/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}",
+        "X-API-Key": "${API_KEY}"
+      },
+      "params": {
+        "version": "latest",
+        "format": "json"
+      }
+    }
+  }
+}
+```
+
+> **Note:** Environment variables in the format `${VAR_NAME}` are automatically expanded from your environment (process.env). This works in URLs, headers, and params. For example, `${REGISTRY_TOKEN}` will be replaced with the value of `process.env.REGISTRY_TOKEN`. See [Authentication & Security](#authentication--security) for more details on using environment variables.
+
+---
+
+### URL Pattern System
+
+Registry URLs support the following placeholders:
+
+### `{name}` Placeholder (required)
+
+The `{name}` placeholder is replaced with the resource name:
+
+```json title="components.json" showLineNumbers
+{
+  "@acme": "https://registry.acme.com/{name}.json"
+}
+```
+
+When installing `@acme/button`, the URL becomes: `https://registry.acme.com/button.json`
+When installing `@acme/auth-utils`, the URL becomes: `https://registry.acme.com/auth-utils.json`
+
+### `{style}` Placeholder (optional)
+
+The `{style}` placeholder is replaced with the current style configuration:
+
+```json
+{
+  "@themes": "https://registry.example.com/{style}/{name}.json"
+}
+```
+
+With style set to `new-york`, installing `@themes/card` resolves to: `https://registry.example.com/new-york/card.json`
+
+The style placeholder is optional. Use this when you want to serve different versions of the same resource. For example, you can serve a different version of a component for each style.
+
+---
+
+## Authentication & Security
+
+### Environment Variables
+
+Use environment variables to securely store credentials:
+
+```json title="components.json"
+{
+  "registries": {
+    "@private": {
+      "url": "https://api.company.com/registry/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+Then set the environment variable:
+
+```bash title=".env.local"
+REGISTRY_TOKEN=your_secret_token_here
+```
+
+### Authentication Methods
+
+#### Bearer Token (OAuth 2.0)
+
+```json
+{
+  "@github": {
+    "url": "https://api.github.com/repos/org/registry/contents/{name}.json",
+    "headers": {
+      "Authorization": "Bearer ${GITHUB_TOKEN}"
+    }
+  }
+}
+```
+
+#### API Key in Headers
+
+```json title="components.json" showLineNumbers
+{
+  "@private": {
+    "url": "https://api.company.com/registry/{name}",
+    "headers": {
+      "X-API-Key": "${API_KEY}"
+    }
+  }
+}
+```
+
+#### Basic Authentication
+
+```json title="components.json" showLineNumbers
+{
+  "@internal": {
+    "url": "https://registry.company.com/{name}.json",
+    "headers": {
+      "Authorization": "Basic ${BASE64_CREDENTIALS}"
+    }
+  }
+}
+```
+
+#### Query Parameter Authentication
+
+```json title="components.json" showLineNumbers
+{
+  "@secure": {
+    "url": "https://registry.example.com/{name}.json",
+    "params": {
+      "api_key": "${API_KEY}",
+      "client_id": "${CLIENT_ID}",
+      "signature": "${REQUEST_SIGNATURE}"
+    }
+  }
+}
+```
+
+#### Multiple Authentication Methods
+
+Some registries require multiple authentication methods:
+
+```json title="components.json" showLineNumbers
+{
+  "@enterprise": {
+    "url": "https://api.enterprise.com/v2/registry/{name}",
+    "headers": {
+      "Authorization": "Bearer ${ACCESS_TOKEN}",
+      "X-API-Key": "${API_KEY}",
+      "X-Workspace-Id": "${WORKSPACE_ID}"
+    },
+    "params": {
+      "version": "latest"
+    }
+  }
+}
+```
+
+### Security Considerations
+
+When working with namespaced registries, especially third-party or public ones, security is paramount. Here's how we handle security:
+
+### Resource Validation
+
+All resources fetched from registries are validated against our registry item schema before installation. This ensures:
+
+- **Structure validation**: Resources must conform to the expected JSON schema
+- **Type safety**: Resource types are validated (`registry:ui`, `registry:lib`, etc.)
+- **No arbitrary code execution**: Resources are data files, not executable scripts
+
+### Environment Variable Security
+
+Environment variables used for authentication are:
+
+- **Never logged**: The CLI never logs or displays environment variable values
+- **Expanded at runtime**: Variables are only expanded when needed, not stored
+- **Isolated per registry**: Each registry maintains its own authentication context
+
+Example of secure configuration:
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@private": {
+      "url": "https://api.company.com/registry/{name}.json",
+      "headers": {
+        "Authorization": "Bearer ${PRIVATE_REGISTRY_TOKEN}"
+      }
+    }
+  }
+}
+```
+
+Never commit actual tokens to version control. Use `.env.local`:
+
+```bash title=".env.local"
+PRIVATE_REGISTRY_TOKEN=actual_token_here
+```
+
+### HTTPS Enforcement
+
+We strongly recommend using HTTPS for all registry URLs:
+
+- **Encrypted transport**: Prevents man-in-the-middle attacks
+- **Certificate validation**: Ensures you're connecting to the legitimate registry
+- **Credential protection**: Headers and tokens are encrypted in transit
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@secure": "https://registry.example.com/{name}.json", // ✅ Good
+    "@insecure": "http://registry.example.com/{name}.json" // ❌ Avoid
+  }
+}
+```
+
+### Content Security
+
+Resources from registries are treated as data, not code:
+
+1. **JSON parsing only**: Resources must be valid JSON
+2. **Schema validation**: Must match the registry item schema
+3. **File path restrictions**: Files can only be written to configured paths
+4. **No script execution**: The CLI doesn't execute any code from registry resources
+
+### Registry Trust Model
+
+The namespace system operates on a trust model:
+
+- **You trust what you install**: Only add registries you trust to your configuration
+- **Explicit configuration**: Registries must be explicitly configured in `components.json`
+- **No automatic registry discovery**: The CLI never automatically adds registries
+- **Dependency transparency**: All dependencies are clearly listed in registry items
+
+### Best Practices for Registry Operators
+
+If you're running your own registry:
+
+1. **Use HTTPS always**: Never serve registry content over HTTP
+2. **Implement authentication**: Require API keys or tokens for private registries
+3. **Rate limiting**: Protect your registry from abuse
+4. **Content validation**: Validate resources before serving them
+
+Example secure registry setup:
+
+```json title="components.json" showLineNumbers
+{
+  "@company": {
+    "url": "https://registry.company.com/v1/{name}.json",
+    "headers": {
+      "Authorization": "Bearer ${COMPANY_TOKEN}",
+      "X-Registry-Version": "1.0"
+    }
+  }
+}
+```
+
+### Inspecting Resources Before Installation
+
+The CLI provides transparency about what's being installed. You can see the payload of a registry item using the following command:
+
+```bash
+npx shadcn@latest view @acme/button
+```
+
+This will output the payload of the registry item to the console.
+
+---
+
+## Dependency Resolution
+
+### Basic Dependency Resolution
+
+Resources can have dependencies across different registries:
+
+```json title="registry-item.json" showLineNumbers
+{
+  "name": "dashboard",
+  "type": "registry:block",
+  "registryDependencies": [
+    "@shadcn/card", // From default registry
+    "@v0/chart", // From v0 registry
+    "@acme/data-table", // From acme registry
+    "@lib/data-fetcher", // Utility library
+    "@ai/analytics-prompt" // AI prompt resource
+  ]
+}
+```
+
+The CLI automatically resolves and installs all dependencies from their respective registries.
+
+### Advanced Dependency Resolution
+
+Understanding how dependencies are resolved internally is important if you're developing registries or need to customize third-party resources.
+
+### How Resolution Works
+
+When you run `npx shadcn@latest add @namespace/resource`, the CLI does the following:
+
+1. **Clears registry context** to start fresh
+2. **Fetches the main resource** from the specified registry
+3. **Recursively resolves dependencies** from their respective registries
+4. **Applies topological sorting** to ensure proper installation order
+5. **Deduplicates files** based on target paths (last one wins)
+6. **Deep merges configurations** (tailwind, cssVars, css, envVars)
+
+This means that if you run the following command:
+
+```bash
+npx shadcn@latest add @acme/auth @custom/login-form
+```
+
+The `login-form.ts` from `@custom/login-form` will override the `login-form.ts` from `@acme/auth` because it's resolved last.
+
+### Overriding Third-Party Resources
+
+You can leverage the dependency resolution process to override any third-party resource by adding them to your custom resource under `registryDependencies` and overriding with your own custom values.
+
+#### Example: Customizing a Third-Party Button
+
+Let's say you want to customize a button from a vendor registry:
+
+**1. Original vendor button** (`@vendor/button`):
+
+```json title="button.json" showLineNumbers
+{
+  "name": "button",
+  "type": "registry:ui",
+  "files": [
+    {
+      "path": "components/ui/button.tsx",
+      "type": "registry:ui",
+      "content": "// Vendor's button implementation\nexport function Button() { ... }"
+    }
+  ],
+  "cssVars": {
+    "light": {
+      "--button-bg": "blue"
+    }
+  }
+}
+```
+
+**2. Create your custom override** (`@my-company/custom-button`):
+
+```json title="custom-button.json" showLineNumbers
+{
+  "name": "custom-button",
+  "type": "registry:ui",
+  "registryDependencies": [
+    "@vendor/button" // Import original first
+  ],
+  "cssVars": {
+    "light": {
+      "--button-bg": "purple" // Override the color
+    }
+  }
+}
+```
+
+**3. Install your custom version**:
+
+```bash
+npx shadcn@latest add @my-company/custom-button
+```
+
+This installs the original button from `@vendor/button` and then overrides the `cssVars` with your own custom values.
+
+### Advanced Override Patterns
+
+#### Extending Without Replacing
+
+Keep the original and add extensions:
+
+```json title="extended-table.json" showLineNumbers
+{
+  "name": "extended-table",
+  "registryDependencies": ["@vendor/table"],
+  "files": [
+    {
+      "path": "components/ui/table-extended.tsx",
+      "content": "import { Table } from '@vendor/table'\n// Add your extensions\nexport function ExtendedTable() { ... }"
+    }
+  ]
+}
+```
+
+This will install the original table from `@vendor/table` and then add your extensions to `components/ui/table-extended.tsx`.
+
+#### Partial Override (Multi-file Resources)
+
+Override only specific files from a complex component:
+
+```json title="custom-auth.json" showLineNumbers
+{
+  "name": "custom-auth",
+  "registryDependencies": [
+    "@vendor/auth" // Has multiple files
+  ],
+  "files": [
+    {
+      "path": "lib/auth-server.ts",
+      "type": "registry:lib",
+      "content": "// Your custom auth server"
+    }
+  ]
+}
+```
+
+### Resolution Order Example
+
+When you install `@custom/dashboard` that depends on multiple resources:
+
+```json title="dashboard.json" showLineNumbers
+{
+  "name": "dashboard",
+  "registryDependencies": [
+    "@shadcn/card", // 1. Resolved first
+    "@vendor/chart", // 2. Resolved second
+    "@custom/card" // 3. Resolved last (overrides @shadcn/card)
+  ]
+}
+```
+
+Resolution order:
+
+1. `@shadcn/card` - installs to `components/ui/card.tsx`
+2. `@vendor/chart` - installs to `components/ui/chart.tsx`
+3. `@custom/card` - overwrites `components/ui/card.tsx` (if same target)
+
+### Key Resolution Features
+
+1. **Source Tracking**: Each resource knows which registry it came from, avoiding naming conflicts
+2. **Circular Dependency Prevention**: Automatically detects and prevents circular dependencies
+3. **Smart Installation Order**: Dependencies are installed first, then the resources that use them
+
+---
+
+## Versioning
+
+You can implement versioning for your registry resources using query parameters. This allows users to pin specific versions or use different release channels.
+
+### Basic Version Parameter
+
+```json title="components.json" showLineNumbers
+{
+  "@versioned": {
+    "url": "https://registry.example.com/{name}",
+    "params": {
+      "version": "v2"
+    }
+  }
+}
+```
+
+This resolves `@versioned/button` to: `https://registry.example.com/button?version=v2`
+
+### Dynamic Version Selection
+
+Use environment variables to control versions across your project:
+
+```json title="components.json" showLineNumbers
+{
+  "@stable": {
+    "url": "https://registry.company.com/{name}",
+    "params": {
+      "version": "${REGISTRY_VERSION}"
+    }
+  }
+}
+```
+
+This allows you to:
+
+- Set `REGISTRY_VERSION=v1.2.3` in production
+- Override per environment (dev, staging, prod)
+
+### Semantic Versioning
+
+Implement semantic versioning with range support:
+
+```json title="components.json" showLineNumbers
+{
+  "@npm-style": {
+    "url": "https://registry.example.com/{name}",
+    "params": {
+      "semver": "^2.0.0",
+      "prerelease": "${ALLOW_PRERELEASE}"
+    }
+  }
+}
+```
+
+### Version Resolution Best Practices
+
+1. **Use environment variables** for version control across environments
+2. **Provide sensible defaults** using the `${VAR:-default}` syntax
+3. **Document version schemes** clearly for registry users
+4. **Support version pinning** for reproducible builds
+5. **Implement version discovery** endpoints (e.g., `/versions/{name}`)
+6. **Cache versioned resources** appropriately with proper cache headers
+
+---
+
+## CLI Commands
+
+The shadcn CLI provides several commands for working with namespaced registries:
+
+### Adding Resources
+
+Install resources from any configured registry:
+
+```bash
+# Install from a specific registry
+npx shadcn@latest add @v0/dashboard
+
+# Install multiple resources
+npx shadcn@latest add @acme/button @lib/utils @ai/prompt
+
+# Install from URL directly
+npx shadcn@latest add https://registry.example.com/button.json
+
+# Install from local file
+npx shadcn@latest add ./local-registry/button.json
+```
+
+### Viewing Resources
+
+Inspect registry items before installation:
+
+```bash
+# View a resource from a registry
+npx shadcn@latest view @acme/button
+
+# View multiple resources
+npx shadcn@latest view @v0/dashboard @shadcn/card
+
+# View from URL
+npx shadcn@latest view https://registry.example.com/button.json
+```
+
+The `view` command displays:
+
+- Resource metadata (name, type, description)
+- Dependencies and registry dependencies
+- File contents that will be installed
+- CSS variables and Tailwind configuration
+- Required environment variables
+
+### Searching Registries
+
+Search for available resources in registries:
+
+```bash
+# Search a specific registry
+npx shadcn@latest search @v0
+
+# Search with query
+npx shadcn@latest search @acme --query "auth"
+
+# Search multiple registries
+npx shadcn@latest search @v0 @acme @lib
+
+# Limit results
+npx shadcn@latest search @v0 --limit 10 --offset 20
+
+# List all items (alias for search)
+npx shadcn@latest list @acme
+```
+
+Search results include:
+
+- Resource name and type
+- Description
+- Registry source
+
+---
+
+## Error Handling
+
+### Registry Not Configured
+
+If you reference a registry that isn't configured:
+
+```bash
+npx shadcn@latest add @non-existent/component
+```
+
+Error:
+
+```txt
+Unknown registry "@non-existent". Make sure it is defined in components.json as follows:
+{
+  "registries": {
+    "@non-existent": "[URL_TO_REGISTRY]"
+  }
+}
+```
+
+### Missing Environment Variables
+
+If required environment variables are not set:
+
+```txt
+Registry "@private" requires the following environment variables:
+
+  • REGISTRY_TOKEN
+
+Set the required environment variables to your .env or .env.local file.
+```
+
+### Resource Not Found
+
+404 Not Found:
+
+```txt
+The item at https://registry.company.com/button.json was not found. It may not exist at the registry.
+```
+
+This usually means:
+
+- The resource name is misspelled
+- The resource doesn't exist in the registry
+- The registry URL pattern is incorrect
+
+### Authentication Failures
+
+401 Unauthorized:
+
+```txt
+You are not authorized to access the item at https://api.company.com/button.json
+Check your authentication credentials and environment variables.
+```
+
+403 Forbidden:
+
+```txt
+Access forbidden for https://api.company.com/button.json
+Verify your API key has the necessary permissions.
+```
+
+---
+
+## Creating Your Own Registry
+
+To make your registry compatible with the namespace system, you can serve any type of resource - components, libraries, utilities, AI prompts, themes, configurations, or any other shareable code/content:
+
+1. **Implement the registry item schema**: Your registry must return JSON that conforms to the [registry item schema](/docs/registry/registry-item-json).
+
+2. **Support the URL pattern**: Include `{name}` in your URL template where the resource name will be inserted.
+
+3. **Define resource types**: Use appropriate `type` fields to identify your resources (e.g., `registry:ui`, `registry:lib`, `registry:ai`, `registry:theme`, etc.).
+
+4. **Handle authentication** (if needed): Accept authentication via headers or query parameters.
+
+5. **Document your namespace**: Provide clear instructions for users to configure your registry:
+
+```json title="components.json" showLineNumbers
+{
+  "registries": {
+    "@your-registry": "https://your-domain.com/r/{name}.json"
+  }
+}
+```
+
+---
+
+## Technical Details
+
+### Parser Pattern
+
+The namespace parser uses the following regex pattern:
+
+```regex title="namespace-parser.js"
+/^(@[a-zA-Z0-9](?:[a-zA-Z0-9-_]*[a-zA-Z0-9])?)\/(.+)$/
+```
+
+This ensures valid namespace formatting and proper component name extraction.
+
+### Resolution Process
+
+1. **Parse**: Extract namespace and component name from `@namespace/component`
+2. **Lookup**: Find registry configuration for `@namespace`
+3. **Build URL**: Replace placeholders with actual values
+4. **Set Headers**: Apply authentication headers if configured
+5. **Fetch**: Retrieve component from the resolved URL
+6. **Validate**: Ensure response matches registry item schema
+7. **Resolve Dependencies**: Recursively fetch any registry dependencies
+
+### Cross-Registry Dependencies
+
+When a component has dependencies from different registries, the resolver:
+
+1. Maintains separate authentication contexts for each registry
+2. Resolves each dependency from its respective source
+3. Deduplicates files based on target paths
+4. Merges configurations (tailwind, cssVars, etc.) from all sources
+
+---
+
+## Best Practices
+
+1. **Use environment variables** for sensitive data like API keys and tokens
+2. **Namespace your registry** with a unique, descriptive name
+3. **Document authentication requirements** clearly for users
+4. **Implement proper error responses** with helpful messages
+5. **Cache registry responses** when possible to improve performance
+6. **Support style variants** if your components have multiple themes
+
+---
+
+## Troubleshooting
+
+### Resources not found
+
+- Verify the registry URL is correct and accessible
+- Check that the `{name}` placeholder is included in the URL
+- Ensure the resource exists in the registry
+- Confirm the resource type matches what the registry provides
+
+### Authentication issues
+
+- Confirm environment variables are set correctly
+- Verify API keys/tokens are valid and not expired
+- Check that headers are being sent in the correct format
+
+### Dependency conflicts
+
+- Review resources with the same name from different registries
+- Use fully qualified names (`@namespace/resource`) to avoid ambiguity
+- Check for circular dependencies between registries
+- Ensure resource types are compatible when mixing registries

apps/v4/content/docs/registry/open-in-v0.mdx

@@ -8,8 +8,8 @@ If your registry is hosted and publicly accessible via a URL, you can open a reg
 eg. [https://v0.dev/chat/api/open?url=https://ui.shadcn.com/r/styles/new-york/login-01.json](https://v0.dev/chat/api/open?url=https://ui.shadcn.com/r/styles/new-york/login-01.json)
 
 <Callout className="mt-6">
-  **Note:** The `Open in v0` button does not support `cssVars` and `tailwind`
-  properties.
+  **Important:** `Open in v0` does not support `cssVars`, `css`, `envVars`,
+  namespaced registries, or advanced authentication methods.
 </Callout>
 
 ## Button
@@ -61,4 +61,46 @@ export function OpenInV0Button({ url }: { url: string }) {
 
 ## Authentication
 
-See the [Adding Auth](/docs/registry/getting-started#adding-auth) section for more information on how to authenticate requests to your registry and Open in v0.
+Open in v0 only supports query parameter authentication. It does not support namespaced registries or advanced authentication methods like Bearer tokens or API keys in headers.
+
+### Using Query Parameter Authentication
+
+To add authentication to your registry for Open in v0, use a `token` query parameter:
+
+```
+https://registry.company.com/r/hello-world.json?token=your_secure_token_here
+```
+
+When implementing this on your registry server:
+
+1. Check for the `token` query parameter
+2. Validate the token against your authentication system
+3. Return a `401 Unauthorized` response if the token is invalid or missing
+4. Both the shadcn CLI and Open in v0 will handle the 401 response and display an appropriate message to users
+
+### Example Implementation
+
+```typescript
+// Next.js API route example
+export async function GET(request: NextRequest) {
+  const token = request.nextUrl.searchParams.get("token")
+
+  if (!isValidToken(token)) {
+    return NextResponse.json(
+      {
+        error: "Unauthorized",
+        message: "Invalid or missing token",
+      },
+      { status: 401 }
+    )
+  }
+
+  // Return the registry item
+  return NextResponse.json(registryItem)
+}
+```
+
+<Callout className="mt-6">
+  **Security Note:** Make sure to encrypt and expire tokens. Never expose
+  production tokens in documentation or examples.
+</Callout>

apps/v4/content/docs/registry/registry-index.mdx

@@ -0,0 +1,79 @@
+---
+title: Index
+description: Open Source Registry Index
+---
+
+The open source registry index is a list of all the open source registries that are available to use out of the box.
+
+When you run `shadcn add` or `shadcn search`, the CLI will automatically check the registry index for the registry you are looking for and add it to your `components.json` file.
+
+You can see the full list at [https://ui.shadcn.com/r/registries.json](https://ui.shadcn.com/r/registries.json).
+
+## Adding a Registry
+
+You can submit a PR to add a registry to the index by adding it to the [registries.json](https://github.com/shadcn-ui/ui/blob/main/apps/v4/public/r/registries.json) file.
+
+Here's an example of how to add a registry to the index:
+
+```json title="registries.json" showLineNumbers
+{
+  "@acme": "https://registry.acme.com/r/{name}.json",
+  "@example": "https://example.com/r/{name}"
+}
+```
+
+### Requirements
+
+1. The registry must be open source and publicly accessible.
+2. The registry must be a valid JSON file that conforms to the [registry schema specification](/docs/registry/registry-json).
+3. The registry is expected to be a flat registry with no nested items i.e `/registry.json` and `/component-name.json` files are expected to be in the root of the registry.
+4. The `files` array, if present, must NOT include a `content` property.
+
+Here's an example of a valid registry:
+
+```json title="registry.json" showLineNumbers
+{
+  "$schema": "https://ui.shadcn.com/schema/registry.json",
+  "name": "acme",
+  "homepage": "https://acme.com",
+  "items": [
+    {
+      "name": "login-form",
+      "type": "registry:component",
+      "title": "Login Form",
+      "description": "A login form component.",
+      "files": [
+        {
+          "path": "registry/new-york/auth/login-form.tsx",
+          "type": "registry:component"
+        }
+      ]
+    },
+    {
+      "name": "example-login-form",
+      "type": "registry:component",
+      "title": "Example Login Form",
+      "description": "An example showing how to use the login form component.",
+      "files": [
+        {
+          "path": "registry/new-york/examples/example-login-form.tsx",
+          "type": "registry:component"
+        }
+      ]
+    }
+    }
+  ]
+}
+```
+
+### Validation
+
+At the root of the `shadcn/ui` project, you can run the following command to validate the `registries.json` file.
+
+```bash
+pnpm validate:registries
+```
+
+This will validate the registries.json file and output any errors.
+
+Once you have submitted your PR, it will be validated and reviewed by the team.

apps/v4/content/docs/registry/registry-item-json.mdx

@@ -12,6 +12,12 @@ The `registry-item.json` schema is used to define your custom registry items.
   "type": "registry:block",
   "title": "Hello World",
   "description": "A simple hello world component.",
+  "registryDependencies": [
+    "button",
+    "@acme/input-form",
+    "https://example.com/r/foo"
+  ],
+  "dependencies": ["is-even@3.0.0", "motion"],
   "files": [
     {
       "path": "registry/new-york/hello-world/hello-world.tsx",
@@ -107,6 +113,7 @@ The following types are supported:
 | `registry:file`      | Use for miscellaneous files.                     |
 | `registry:style`     | Use for registry styles. eg. `new-york`          |
 | `registry:theme`     | Use for themes.                                  |
+| `registry:item`      | Use for universal registry items.                |
 
 ### author
 
@@ -139,17 +146,17 @@ Use `@version` to specify the version of your registry item.
 
 ### registryDependencies
 
-Used for registry dependencies. Can be names or URLs. Use the name of the item to reference shadcn/ui components and urls to reference other registries.
+Used for registry dependencies. Can be names, namespaced or URLs.
 
 - For `shadcn/ui` registry items such as `button`, `input`, `select`, etc use the name eg. `['button', 'input', 'select']`.
+- For namespaced registry items such as `@acme` use the name eg. `['@acme/input-form']`.
 - For custom registry items use the URL of the registry item eg. `['https://example.com/r/hello-world.json']`.
 
 ```json title="registry-item.json" showLineNumbers
 {
   "registryDependencies": [
     "button",
-    "input",
-    "select",
+    "@acme/input-form",
     "https://example.com/r/editor.json"
   ]
 }
@@ -260,11 +267,13 @@ Use to define CSS variables for your registry item.
 
 ### css
 
-Use `css` to add new rules to the project's CSS file eg. `@layer base`, `@layer components`, `@utility`, `@keyframes`, etc.
+Use `css` to add new rules to the project's CSS file eg. `@layer base`, `@layer components`, `@utility`, `@keyframes`, `@plugin`, etc.
 
 ```json title="registry-item.json" showLineNumbers
 {
   "css": {
+    "@plugin @tailwindcss/typography": {},
+    "@plugin foo": {},
     "@layer base": {
       "body": {
         "font-size": "var(--text-base)",
@@ -293,13 +302,35 @@ Use `css` to add new rules to the project's CSS file eg. `@layer base`, `@layer
 }
 ```
 
+### envVars
+
+Use `envVars` to add environment variables to your registry item.
+
+```json title="registry-item.json" showLineNumbers
+{
+  "envVars": {
+    "NEXT_PUBLIC_APP_URL": "http://localhost:4000",
+    "DATABASE_URL": "postgresql://postgres:postgres@localhost:5432/postgres",
+    "OPENAI_API_KEY": ""
+  }
+}
+```
+
+Environment variables are added to the `.env.local` or `.env` file. Existing variables are not overwritten.
+
+<Callout>
+
+**IMPORTANT:** Use `envVars` to add development or example variables. Do NOT use it to add production variables.
+
+</Callout>
+
 ### docs
 
 Use `docs` to show custom documentation or message when installing your registry item via the CLI.
 
 ```json title="registry-item.json" showLineNumbers
 {
-  "docs": "Remember to add the FOO_BAR environment variable to your .env file."
+  "docs": "To get an OPENAI_API_KEY, sign up for an account at https://platform.openai.com."
 }
 ```
 

apps/v4/content/docs/registry/registry-json.mdx

@@ -16,6 +16,12 @@ The `registry.json` schema is used to define your custom component registry.
       "type": "registry:block",
       "title": "Hello World",
       "description": "A simple hello world component.",
+      "registryDependencies": [
+        "button",
+        "@acme/input-form",
+        "https://example.com/r/foo"
+      ],
+      "dependencies": ["is-even@3.0.0", "motion"],
       "files": [
         {
           "path": "registry/new-york/hello-world/hello-world.tsx",
@@ -73,6 +79,12 @@ The `items` in your registry. Each item must implement the [registry-item schema
       "type": "registry:block",
       "title": "Hello World",
       "description": "A simple hello world component.",
+      "registryDependencies": [
+        "button",
+        "@acme/input-form",
+        "https://example.com/r/foo"
+      ],
+      "dependencies": ["is-even@3.0.0", "motion"],
       "files": [
         {
           "path": "registry/new-york/hello-world/hello-world.tsx",

apps/v4/hooks/use-layout.tsx

@@ -0,0 +1,160 @@
+"use client"
+
+import * as React from "react"
+
+type Layout = "fixed" | "full"
+
+interface LayoutProviderProps {
+  children: React.ReactNode
+  defaultLayout?: Layout
+  forcedLayout?: Layout
+  storageKey?: string
+  attribute?: string | string[]
+  value?: Record<string, string>
+}
+
+interface LayoutProviderState {
+  layout: Layout
+  setLayout: (layout: Layout | ((prev: Layout) => Layout)) => void
+  forcedLayout?: Layout
+}
+
+const isServer = typeof window === "undefined"
+const LayoutContext = React.createContext<LayoutProviderState | undefined>(
+  undefined
+)
+
+const saveToLS = (storageKey: string, value: string) => {
+  try {
+    localStorage.setItem(storageKey, value)
+  } catch {
+    // Unsupported
+  }
+}
+
+const useLayout = () => {
+  const context = React.useContext(LayoutContext)
+  if (context === undefined) {
+    throw new Error("useLayout must be used within a LayoutProvider")
+  }
+  return context
+}
+
+const Layout = ({
+  forcedLayout,
+  storageKey = "layout",
+  defaultLayout = "full",
+  attribute = "class",
+  value,
+  children,
+}: LayoutProviderProps) => {
+  const [layout, setLayoutState] = React.useState<Layout>(() => {
+    if (isServer) return defaultLayout
+    try {
+      const saved = localStorage.getItem(storageKey)
+      if (saved === "fixed" || saved === "full") {
+        return saved
+      }
+      return defaultLayout
+    } catch {
+      return defaultLayout
+    }
+  })
+
+  const attrs = !value ? ["layout-fixed", "layout-full"] : Object.values(value)
+
+  const applyLayout = React.useCallback(
+    (layout: Layout) => {
+      if (!layout) return
+
+      const name = value ? value[layout] : `layout-${layout}`
+      const d = document.documentElement
+
+      const handleAttribute = (attr: string) => {
+        if (attr === "class") {
+          d.classList.remove(...attrs)
+          if (name) d.classList.add(name)
+        } else if (attr.startsWith("data-")) {
+          if (name) {
+            d.setAttribute(attr, name)
+          } else {
+            d.removeAttribute(attr)
+          }
+        }
+      }
+
+      if (Array.isArray(attribute)) attribute.forEach(handleAttribute)
+      else handleAttribute(attribute)
+    },
+    [attrs, attribute, value]
+  )
+
+  const setLayout = React.useCallback(
+    (value: Layout | ((prev: Layout) => Layout)) => {
+      if (typeof value === "function") {
+        setLayoutState((prevLayout) => {
+          const newLayout = value(prevLayout)
+          saveToLS(storageKey, newLayout)
+          return newLayout
+        })
+      } else {
+        setLayoutState(value)
+        saveToLS(storageKey, value)
+      }
+    },
+    [storageKey]
+  )
+
+  // localStorage event handling
+  React.useEffect(() => {
+    const handleStorage = (e: StorageEvent) => {
+      if (e.key !== storageKey) return
+
+      if (!e.newValue) {
+        setLayout(defaultLayout)
+      } else if (e.newValue === "fixed" || e.newValue === "full") {
+        setLayoutState(e.newValue)
+      }
+    }
+
+    window.addEventListener("storage", handleStorage)
+    return () => window.removeEventListener("storage", handleStorage)
+  }, [setLayout, storageKey, defaultLayout])
+
+  // Apply layout on mount and when it changes
+  React.useEffect(() => {
+    const currentLayout = forcedLayout ?? layout
+    applyLayout(currentLayout)
+  }, [forcedLayout, layout, applyLayout])
+
+  // Prevent layout changes during hydration
+  const [isHydrated, setIsHydrated] = React.useState(false)
+  React.useEffect(() => {
+    setIsHydrated(true)
+  }, [])
+
+  const providerValue = React.useMemo(
+    () => ({
+      layout: isHydrated ? layout : defaultLayout,
+      setLayout,
+      forcedLayout,
+    }),
+    [layout, setLayout, forcedLayout, isHydrated, defaultLayout]
+  )
+
+  return (
+    <LayoutContext.Provider value={providerValue}>
+      {children}
+    </LayoutContext.Provider>
+  )
+}
+
+const LayoutProvider = (props: LayoutProviderProps) => {
+  const context = React.useContext(LayoutContext)
+
+  // Ignore nested context providers, just passthrough children
+  if (context) return <>{props.children}</>
+  return <Layout {...props} />
+}
+
+export { useLayout, LayoutProvider }

apps/v4/hooks/use-mobile.ts

@@ -0,0 +1,17 @@
+import * as React from "react"
+
+export function useIsMobile(mobileBreakpoint = 768) {
+  const [isMobile, setIsMobile] = React.useState<boolean | undefined>(undefined)
+
+  React.useEffect(() => {
+    const mql = window.matchMedia(`(max-width: ${mobileBreakpoint - 1}px)`)
+    const onChange = () => {
+      setIsMobile(window.innerWidth < mobileBreakpoint)
+    }
+    mql.addEventListener("change", onChange)
+    setIsMobile(window.innerWidth < mobileBreakpoint)
+    return () => mql.removeEventListener("change", onChange)
+  }, [])
+
+  return !!isMobile
+}

apps/v4/lib/blocks.ts

@@ -1,6 +1,6 @@
 "use server"
 
-import { registryItemSchema } from "shadcn/registry"
+import { registryItemSchema } from "shadcn/schema"
 import { z } from "zod"
 
 export async function getAllBlockIds(
@@ -10,18 +10,26 @@ export async function getAllBlockIds(
   ],
   categories: string[] = []
 ): Promise<string[]> {
+  const blocks = await getAllBlocks(types, categories)
+
+  return blocks.map((block) => block.name)
+}
+
+export async function getAllBlocks(
+  types: z.infer<typeof registryItemSchema>["type"][] = [
+    "registry:block",
+    "registry:internal",
+  ],
+  categories: string[] = []
+) {
   const { Index } = await import("@/registry/__index__")
   const index = z.record(registryItemSchema).parse(Index)
 
-  return Object.values(index)
-    .filter(
-      (block) =>
-        types.includes(block.type) &&
-        (categories.length === 0 ||
-          block.categories?.some((category) =>
-            categories.includes(category)
-          )) &&
-        !block.name.startsWith("chart-")
-    )
-    .map((block) => block.name)
+  return Object.values(index).filter(
+    (block) =>
+      types.includes(block.type) &&
+      (categories.length === 0 ||
+        block.categories?.some((category) => categories.includes(category))) &&
+      !block.name.startsWith("chart-")
+  )
 }

apps/v4/lib/config.ts

@@ -3,7 +3,7 @@ export const siteConfig = {
   url: "https://ui.shadcn.com",
   ogImage: "https://ui.shadcn.com/og.jpg",
   description:
-    "A set of beautifully-designed, accessible components and a code distribution platform. Works with your favorite frameworks. Open Source. Open Code.",
+    "A set of beautifully designed components that you can customize, extend, and build on. Start here then make it your own. Open Source. Open Code.",
   links: {
     twitter: "https://twitter.com/shadcn",
     github: "https://github.com/shadcn-ui/ui",
@@ -25,6 +25,10 @@ export const siteConfig = {
       href: "/charts/area",
       label: "Charts",
     },
+    {
+      href: "/themes",
+      label: "Themes",
+    },
     {
       href: "/colors",
       label: "Colors",

apps/v4/lib/events.ts

@@ -15,6 +15,7 @@ const eventSchema = z.object({
     "copy_chart_theme",
     "copy_chart_data",
     "copy_color",
+    "set_layout",
   ]),
   // declare type AllowedPropertyValues = string | number | boolean | null
   properties: z

apps/v4/lib/flags.ts

@@ -0,0 +1 @@
+export const showMcpDocs = true

apps/v4/lib/registry.ts

@@ -1,7 +1,7 @@
 import { promises as fs } from "fs"
 import { tmpdir } from "os"
 import path from "path"
-import { registryItemFileSchema, registryItemSchema } from "shadcn/registry"
+import { registryItemFileSchema, registryItemSchema } from "shadcn/schema"
 import { Project, ScriptKind } from "ts-morph"
 import { z } from "zod"
 

apps/v4/mdx-components.tsx

@@ -52,7 +52,7 @@ export const mdxComponents = {
           .replace(/\?/g, "")
           .toLowerCase()}
         className={cn(
-          "font-heading mt-12 scroll-m-28 text-2xl font-medium tracking-tight first:mt-0 lg:mt-20 [&+p]:!mt-4",
+          "font-heading mt-8 scroll-m-28 text-xl font-medium tracking-tight first:mt-0 lg:mt-8 [&+p]:!mt-4 *:[code]:text-xl",
           className
         )}
         {...props}
@@ -62,7 +62,7 @@ export const mdxComponents = {
   h3: ({ className, ...props }: React.ComponentProps<"h3">) => (
     <h3
       className={cn(
-        "font-heading mt-8 scroll-m-28 text-xl font-semibold tracking-tight",
+        "font-heading mt-8 scroll-m-28 text-lg font-medium tracking-tight *:[code]:text-xl",
         className
       )}
       {...props}
@@ -71,7 +71,7 @@ export const mdxComponents = {
   h4: ({ className, ...props }: React.ComponentProps<"h4">) => (
     <h4
       className={cn(
-        "font-heading mt-8 scroll-m-28 text-lg font-medium tracking-tight",
+        "font-heading mt-8 scroll-m-28 text-base font-medium tracking-tight",
         className
       )}
       {...props}
@@ -80,7 +80,7 @@ export const mdxComponents = {
   h5: ({ className, ...props }: React.ComponentProps<"h5">) => (
     <h5
       className={cn(
-        "mt-8 scroll-m-28 text-lg font-medium tracking-tight",
+        "mt-8 scroll-m-28 text-base font-medium tracking-tight",
         className
       )}
       {...props}
@@ -228,7 +228,7 @@ export const mdxComponents = {
       return (
         <code
           className={cn(
-            "bg-muted relative rounded-md px-[0.3rem] py-[0.2rem] font-mono text-[0.8rem] outline-none",
+            "bg-muted relative rounded-md px-[0.3rem] py-[0.2rem] font-mono text-[0.8rem] break-words outline-none",
             className
           )}
           {...props}
@@ -298,7 +298,7 @@ export const mdxComponents = {
   }: React.ComponentProps<typeof TabsList>) => (
     <TabsList
       className={cn(
-        "justify-start gap-4 rounded-none bg-transparent px-2 md:px-0",
+        "justify-start gap-4 rounded-none bg-transparent px-0",
         className
       )}
       {...props}
@@ -310,7 +310,7 @@ export const mdxComponents = {
   }: React.ComponentProps<typeof TabsTrigger>) => (
     <TabsTrigger
       className={cn(
-        "text-muted-foreground data-[state=active]:text-foreground px-0 text-base data-[state=active]:shadow-none dark:data-[state=active]:border-transparent dark:data-[state=active]:bg-transparent",
+        "text-muted-foreground data-[state=active]:text-foreground data-[state=active]:border-primary dark:data-[state=active]:border-primary hover:text-primary rounded-none border-0 border-b-2 border-transparent bg-transparent px-0 pb-3 text-base data-[state=active]:bg-transparent data-[state=active]:shadow-none dark:data-[state=active]:bg-transparent",
         className
       )}
       {...props}

apps/v4/next.config.mjs

@@ -63,6 +63,29 @@ const nextConfig = {
         destination: "/charts/area",
         permanent: true,
       },
+      {
+        source: "/view/styles/:style/:name",
+        destination: "/view/:name",
+        permanent: true,
+      },
+      {
+        source: "/docs/:path*.mdx",
+        destination: "/docs/:path*.md",
+        permanent: true,
+      },
+      {
+        source: "/mcp",
+        destination: "/docs/mcp",
+        permanent: false,
+      },
+    ]
+  },
+  rewrites() {
+    return [
+      {
+        source: "/docs/:path*.md",
+        destination: "/llm/:path*",
+      },
     ]
   },
 }

apps/v4/package.json

@@ -14,6 +14,7 @@
     "format:check": "prettier --check \"**/*.{ts,tsx,mdx}\" --cache",
     "registry:build": "tsx --tsconfig ./tsconfig.scripts.json ./scripts/build-registry.mts && prettier --log-level silent --write \"registry/**/*.{ts,tsx,json,mdx}\" --cache",
     "registry:capture": "tsx --tsconfig ./tsconfig.scripts.json ./scripts/capture-registry.mts",
+    "validate:registries": "tsx --tsconfig ./tsconfig.scripts.json ./scripts/validate-registries.mts",
     "postinstall": "fumadocs-mdx"
   },
   "dependencies": {
@@ -54,36 +55,39 @@
     "@radix-ui/react-toggle-group": "^1.1.1",
     "@radix-ui/react-tooltip": "^1.1.7",
     "@tabler/icons-react": "^3.31.0",
-    "@tailwindcss/postcss": "^4.0.1",
+    "@tailwindcss/postcss": "^4.1.11",
     "@tanstack/react-table": "^8.9.1",
     "@vercel/analytics": "^1.4.1",
     "change-case": "^5.4.4",
+    "chrono-node": "^2.8.2",
     "class-variance-authority": "^0.7.1",
     "clsx": "^2.1.1",
     "cmdk": "^1.1.1",
     "date-fns": "^4.1.0",
     "embla-carousel-autoplay": "8.5.2",
     "embla-carousel-react": "8.5.2",
-    "fumadocs-core": "^15.3.1",
-    "fumadocs-docgen": "^2.0.0",
-    "fumadocs-mdx": "^11.6.3",
-    "fumadocs-ui": "^15.3.1",
+    "fumadocs-core": "15.3.1",
+    "fumadocs-docgen": "2.0.0",
+    "fumadocs-mdx": "11.6.3",
+    "fumadocs-ui": "15.3.1",
     "input-otp": "^1.4.2",
     "jotai": "^2.1.0",
+    "little-date": "^1.0.0",
+    "lodash": "^4.17.21",
     "lucide-react": "0.474.0",
     "motion": "^12.12.1",
     "next": "15.3.1",
     "next-themes": "0.4.6",
     "postcss": "^8.5.1",
     "react": "19.1.0",
-    "react-day-picker": "^8.7.1",
+    "react-day-picker": "^9.7.0",
     "react-dom": "19.1.0",
     "react-hook-form": "^7.54.2",
     "react-resizable-panels": "^2.1.7",
     "recharts": "2.15.1",
     "rehype-pretty-code": "^0.14.1",
     "rimraf": "^6.0.1",
-    "shadcn": "2.6.0",
+    "shadcn": "3.3.0",
     "shiki": "^1.10.1",
     "sonner": "^2.0.0",
     "tailwind-merge": "^3.0.1",
@@ -95,6 +99,7 @@
     "@eslint/eslintrc": "^3",
     "@ianvs/prettier-plugin-sort-imports": "^4.4.1",
     "@tailwindcss/postcss": "^4",
+    "@types/lodash": "^4.17.7",
     "@types/mdx": "^2.0.13",
     "@types/node": "^20",
     "@types/react": "19.1.2",
@@ -104,7 +109,7 @@
     "eslint-config-next": "15.3.1",
     "prettier": "^3.4.2",
     "prettier-plugin-tailwindcss": "^0.6.11",
-    "tailwindcss": "^4.1.7",
+    "tailwindcss": "^4.1.11",
     "tw-animate-css": "^1.2.4",
     "typescript": "^5",
     "unist-builder": "3.0.0",

apps/v4/public/r/index.json

@@ -137,7 +137,7 @@
     "name": "calendar",
     "type": "registry:ui",
     "dependencies": [
-      "react-day-picker@8.10.1",
+      "react-day-picker@latest",
       "date-fns"
     ],
     "registryDependencies": [
@@ -180,7 +180,7 @@
     "name": "chart",
     "type": "registry:ui",
     "dependencies": [
-      "recharts",
+      "recharts@2.15.4",
       "lucide-react"
     ],
     "registryDependencies": [

apps/v4/public/r/registries.json

@@ -0,0 +1,36 @@
+{
+  "@aceternity": "https://ui.aceternity.com/registry/{name}.json",
+  "@ai-elements": "https://registry.ai-sdk.dev/{name}.json",
+  "@alexcarpenter": "https://ui.alexcarpenter.me/r/{name}.json",
+  "@alpine": "https://alpine-registry.vercel.app/r/{name}.json",
+  "@animate-ui": "https://animate-ui.com/r/{name}.json",
+  "@blocks": "https://blocks.so/r/{name}.json",
+  "@clerk": "https://clerk.com/r/{name}.json",
+  "@cult-ui": "https://cult-ui.com/r/{name}.json",
+  "@kibo-ui": "https://www.kibo-ui.com/r/{name}.json",
+  "@kokonutui": "https://kokonutui.com/r/{name}.json",
+  "@magicui": "https://magicui.design/r/{name}.json",
+  "@motion-primitives": "https://motion-primitives.com/c/{name}.json",
+  "@originui": "https://originui.com/r/{name}.json",
+  "@prompt-kit": "https://prompt-kit.com/c/{name}.json",
+  "@tailark": "https://tailark.com/r/{name}.json",
+  "@react-bits": "https://reactbits.dev/r/{name}.json",
+  "@reui": "https://reui.io/r/{name}.json",
+  "@heseui": "https://www.heseui.com/r/{name}.json",
+  "@paceui-ui": "https://ui.paceui.com/r/{name}.json",
+  "@basecn": "https://basecn.dev/r/{name}.json",
+  "@ncdai": "https://chanhdai.com/r/{name}.json",
+  "@8bitcn": "https://8bitcn.com/r/{name}.json",
+  "@billingsdk": "https://billingsdk.com/r/{name}.json",
+  "@elements": "https://tryelements.dev/r/{name}.json",
+  "@nativeui": "https://nativeui.io/registry/{name}.json",
+  "@smoothui": "https://smoothui.dev/r/{name}.json",
+  "@formcn": "https://formcn.dev/r/{name}.json",
+  "@limeplay": "https://limeplay.winoffrg.dev/r/{name}.json",
+  "@skiper-ui": "https://skiper-ui.com/registry/{name}.json",
+  "@shadcn-editor": "https://shadcn-editor.vercel.app/r/{name}.json",
+  "@rigidui": "https://rigidui.com/r/{name}.json",
+  "@retroui": "https://retroui.dev/r/{name}.json",
+  "@wds": "https://wds-shadcn-registry.netlify.app/r/{name}.json",
+  "@97cn": "https://97cn.itzik.co/r/{name}.json"
+}

apps/v4/public/r/styles/default/calendar-01.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-01",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "A simple calendar.",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-01.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar01() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Calendar\n      mode=\"single\"\n      defaultMonth={date}\n      selected={date}\n      onSelect={setDate}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-4 py-12 items-start md:py-20 justify-center min-w-0",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-02.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-02",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Multiple months with single selection.",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-02.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar02() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Calendar\n      mode=\"single\"\n      defaultMonth={date}\n      numberOfMonths={2}\n      selected={date}\n      onSelect={setDate}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-4 py-12 items-start md:py-20 justify-center min-w-0",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-03.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-03",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Multiple months with multiple selection.",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-03.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar03() {\n  const [dates, setDates] = React.useState<Date[]>([\n    new Date(2025, 5, 12),\n    new Date(2025, 6, 24),\n  ])\n\n  return (\n    <Calendar\n      mode=\"multiple\"\n      numberOfMonths={2}\n      defaultMonth={dates[0]}\n      required\n      selected={dates}\n      onSelect={setDates}\n      max={5}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-4 py-12 items-start md:py-20 justify-center min-w-0",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-04.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-04",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Single month with range selection",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-04.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar04() {\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 5, 9),\n    to: new Date(2025, 5, 26),\n  })\n\n  return (\n    <Calendar\n      mode=\"range\"\n      defaultMonth={dateRange?.from}\n      selected={dateRange}\n      onSelect={setDateRange}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-4 py-12 items-start md:py-20 justify-center min-w-0 xl:pt-28",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-05.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-05",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Multiple months with range selection",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-05.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar05() {\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 5, 12),\n    to: new Date(2025, 6, 15),\n  })\n\n  return (\n    <Calendar\n      mode=\"range\"\n      defaultMonth={dateRange?.from}\n      selected={dateRange}\n      onSelect={setDateRange}\n      numberOfMonths={2}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-06.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-06",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Range selection with minimum days",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-06.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar06() {\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 5, 12),\n    to: new Date(2025, 5, 26),\n  })\n\n  return (\n    <div className=\"flex min-w-0 flex-col gap-2\">\n      <Calendar\n        mode=\"range\"\n        defaultMonth={dateRange?.from}\n        selected={dateRange}\n        onSelect={setDateRange}\n        numberOfMonths={1}\n        min={5}\n        className=\"rounded-lg border shadow-sm\"\n      />\n      <div className=\"text-muted-foreground text-center text-xs\">\n        A minimum of 5 days is required\n      </div>\n    </div>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-07.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-07",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Range selection with minimum and maximum days",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-07.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar07() {\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 5, 18),\n    to: new Date(2025, 6, 7),\n  })\n\n  return (\n    <div className=\"flex min-w-0 flex-col gap-2\">\n      <Calendar\n        mode=\"range\"\n        defaultMonth={dateRange?.from}\n        selected={dateRange}\n        onSelect={setDateRange}\n        numberOfMonths={2}\n        min={2}\n        max={20}\n        className=\"rounded-lg border shadow-sm\"\n      />\n      <div className=\"text-muted-foreground text-center text-xs\">\n        Your stay must be between 2 and 20 nights\n      </div>\n    </div>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-08.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-08",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Calendar with disabled days",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-08.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar08() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Calendar\n      mode=\"single\"\n      defaultMonth={date}\n      selected={date}\n      onSelect={setDate}\n      disabled={{\n        before: new Date(2025, 5, 12),\n      }}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-09.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-09",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Calendar with disabled weekends",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-09.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar09() {\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 5, 17),\n    to: new Date(2025, 5, 20),\n  })\n\n  return (\n    <Calendar\n      mode=\"range\"\n      defaultMonth={dateRange?.from}\n      selected={dateRange}\n      onSelect={setDateRange}\n      numberOfMonths={2}\n      disabled={{ dayOfWeek: [0, 6] }}\n      className=\"rounded-lg border shadow-sm\"\n      excludeDisabled\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-10.json

@@ -0,0 +1,29 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-10",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Today button",
+  "registryDependencies": [
+    "calendar",
+    "card",
+    "button"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-10.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Button } from \"@/registry/default/ui/button\"\nimport { Calendar } from \"@/registry/default/ui/calendar\"\nimport {\n  Card,\n  CardContent,\n  CardDescription,\n  CardHeader,\n  CardTitle,\n} from \"@/registry/default/ui/card\"\n\nexport default function Calendar10() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n  const [month, setMonth] = React.useState<Date | undefined>(new Date())\n\n  return (\n    <Card>\n      <CardHeader className=\"relative\">\n        <CardTitle>Appointment</CardTitle>\n        <CardDescription>Find a date</CardDescription>\n        <Button\n          size=\"sm\"\n          variant=\"outline\"\n          className=\"absolute right-4 top-4\"\n          onClick={() => {\n            setMonth(new Date())\n            setDate(new Date())\n          }}\n        >\n          Today\n        </Button>\n      </CardHeader>\n      <CardContent>\n        <Calendar\n          mode=\"single\"\n          month={month}\n          onMonthChange={setMonth}\n          selected={date}\n          onSelect={setDate}\n          className=\"bg-transparent p-0\"\n        />\n      </CardContent>\n    </Card>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-11.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-11",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Start and end of month",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-11.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar11() {\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 5, 17),\n    to: new Date(2025, 5, 20),\n  })\n\n  return (\n    <div className=\"flex min-w-0 flex-col gap-2\">\n      <Calendar\n        mode=\"range\"\n        selected={dateRange}\n        onSelect={setDateRange}\n        numberOfMonths={2}\n        startMonth={new Date(2025, 5, 1)}\n        endMonth={new Date(2025, 6, 31)}\n        disableNavigation\n        className=\"rounded-lg border shadow-sm\"\n      />\n      <div className=\"text-muted-foreground text-center text-xs\">\n        We are open in June and July only.\n      </div>\n    </div>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-12.json

@@ -0,0 +1,29 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-12",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Localized calendar",
+  "registryDependencies": [
+    "calendar",
+    "card",
+    "select"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-12.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { type DateRange } from \"react-day-picker\"\nimport { enUS, es } from \"react-day-picker/locale\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\nimport {\n  Card,\n  CardContent,\n  CardDescription,\n  CardHeader,\n  CardTitle,\n} from \"@/registry/default/ui/card\"\nimport {\n  Select,\n  SelectContent,\n  SelectItem,\n  SelectTrigger,\n  SelectValue,\n} from \"@/registry/default/ui/select\"\n\nconst localizedStrings = {\n  en: {\n    title: \"Book an appointment\",\n    description: \"Select the dates for your appointment\",\n  },\n  es: {\n    title: \"Reserva una cita\",\n    description: \"Selecciona las fechas para tu cita\",\n  },\n} as const\n\nexport default function Calendar12() {\n  const [locale, setLocale] =\n    React.useState<keyof typeof localizedStrings>(\"es\")\n  const [dateRange, setDateRange] = React.useState<DateRange | undefined>({\n    from: new Date(2025, 8, 9),\n    to: new Date(2025, 8, 17),\n  })\n\n  return (\n    <Card>\n      <CardHeader className=\"relative border-b\">\n        <CardTitle>{localizedStrings[locale].title}</CardTitle>\n        <CardDescription>\n          {localizedStrings[locale].description}\n        </CardDescription>\n        <Select\n          value={locale}\n          onValueChange={(value) =>\n            setLocale(value as keyof typeof localizedStrings)\n          }\n        >\n          <SelectTrigger className=\"absolute right-4 top-4 w-[100px]\">\n            <SelectValue placeholder=\"Language\" />\n          </SelectTrigger>\n          <SelectContent align=\"end\">\n            <SelectItem value=\"es\">Español</SelectItem>\n            <SelectItem value=\"en\">English</SelectItem>\n          </SelectContent>\n        </Select>\n      </CardHeader>\n      <CardContent className=\"pt-4\">\n        <Calendar\n          mode=\"range\"\n          selected={dateRange}\n          onSelect={setDateRange}\n          defaultMonth={dateRange?.from}\n          numberOfMonths={2}\n          locale={locale === \"es\" ? es : enUS}\n          className=\"bg-transparent p-0\"\n          buttonVariant=\"outline\"\n        />\n      </CardContent>\n    </Card>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-13.json

@@ -0,0 +1,29 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-13",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "With Month and Year Dropdown",
+  "registryDependencies": [
+    "calendar",
+    "label",
+    "select"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-13.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\nimport { Label } from \"@/registry/default/ui/label\"\nimport {\n  Select,\n  SelectContent,\n  SelectItem,\n  SelectTrigger,\n  SelectValue,\n} from \"@/registry/default/ui/select\"\n\nexport default function Calendar13() {\n  const [dropdown, setDropdown] =\n    React.useState<React.ComponentProps<typeof Calendar>[\"captionLayout\"]>(\n      \"dropdown\"\n    )\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <div className=\"flex flex-col gap-4\">\n      <Calendar\n        mode=\"single\"\n        defaultMonth={date}\n        selected={date}\n        onSelect={setDate}\n        captionLayout={dropdown}\n        className=\"rounded-lg border shadow-sm\"\n      />\n      <div className=\"flex flex-col gap-3\">\n        <Label htmlFor=\"dropdown\" className=\"px-1\">\n          Dropdown\n        </Label>\n        <Select\n          value={dropdown}\n          onValueChange={(value) =>\n            setDropdown(\n              value as React.ComponentProps<typeof Calendar>[\"captionLayout\"]\n            )\n          }\n        >\n          <SelectTrigger id=\"dropdown\" className=\"bg-background w-full\">\n            <SelectValue placeholder=\"Dropdown\" />\n          </SelectTrigger>\n          <SelectContent align=\"center\">\n            <SelectItem value=\"dropdown\">Month and Year</SelectItem>\n            <SelectItem value=\"dropdown-months\">Month Only</SelectItem>\n            <SelectItem value=\"dropdown-years\">Year Only</SelectItem>\n          </SelectContent>\n        </Select>\n      </div>\n    </div>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-14.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-14",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "With Booked/Unavailable Days",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-14.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar14() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n  const bookedDates = Array.from(\n    { length: 12 },\n    (_, i) => new Date(2025, 5, 15 + i)\n  )\n\n  return (\n    <Calendar\n      mode=\"single\"\n      defaultMonth={date}\n      selected={date}\n      onSelect={setDate}\n      disabled={bookedDates}\n      modifiers={{\n        booked: bookedDates,\n      }}\n      modifiersClassNames={{\n        booked: \"[&>button]:line-through opacity-100\",\n      }}\n      className=\"rounded-lg border shadow-sm\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-15.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-15",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "With Week Numbers",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-15.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar15() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Calendar\n      mode=\"single\"\n      defaultMonth={date}\n      selected={date}\n      onSelect={setDate}\n      className=\"rounded-lg border shadow-sm\"\n      showWeekNumber\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-16.json

@@ -0,0 +1,30 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-16",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "With time picker",
+  "registryDependencies": [
+    "calendar",
+    "card",
+    "input",
+    "label"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-16.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { Clock2Icon } from \"lucide-react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\nimport { Card, CardContent, CardFooter } from \"@/registry/default/ui/card\"\nimport { Input } from \"@/registry/default/ui/input\"\nimport { Label } from \"@/registry/default/ui/label\"\n\nexport default function Calendar16() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Card className=\"w-fit py-4\">\n      <CardContent className=\"px-4\">\n        <Calendar\n          mode=\"single\"\n          selected={date}\n          onSelect={setDate}\n          className=\"bg-transparent p-0\"\n        />\n      </CardContent>\n      <CardFooter className=\"flex flex-col gap-6 border-t px-4 pb-0 pt-4\">\n        <div className=\"flex w-full flex-col gap-3\">\n          <Label htmlFor=\"time-from\">Start Time</Label>\n          <div className=\"relative flex w-full items-center gap-2\">\n            <Clock2Icon className=\"text-muted-foreground pointer-events-none absolute left-2.5 size-4 select-none\" />\n            <Input\n              id=\"time-from\"\n              type=\"time\"\n              step=\"1\"\n              defaultValue=\"10:30:00\"\n              className=\"appearance-none pl-8 [&::-webkit-calendar-picker-indicator]:hidden [&::-webkit-calendar-picker-indicator]:appearance-none\"\n            />\n          </div>\n        </div>\n        <div className=\"flex w-full flex-col gap-3\">\n          <Label htmlFor=\"time-to\">End Time</Label>\n          <div className=\"relative flex w-full items-center gap-2\">\n            <Clock2Icon className=\"text-muted-foreground pointer-events-none absolute left-2.5 size-4 select-none\" />\n            <Input\n              id=\"time-to\"\n              type=\"time\"\n              step=\"1\"\n              defaultValue=\"12:30:00\"\n              className=\"appearance-none pl-8 [&::-webkit-calendar-picker-indicator]:hidden [&::-webkit-calendar-picker-indicator]:appearance-none\"\n            />\n          </div>\n        </div>\n      </CardFooter>\n    </Card>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start justify-center min-w-0",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-17.json

@@ -0,0 +1,30 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-17",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "With time picker inline",
+  "registryDependencies": [
+    "calendar",
+    "card",
+    "input",
+    "label"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-17.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\nimport { Card, CardContent, CardFooter } from \"@/registry/default/ui/card\"\nimport { Input } from \"@/registry/default/ui/input\"\nimport { Label } from \"@/registry/default/ui/label\"\n\nexport default function Calendar17() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Card className=\"w-fit py-4\">\n      <CardContent className=\"px-4\">\n        <Calendar\n          mode=\"single\"\n          selected={date}\n          onSelect={setDate}\n          className=\"bg-transparent p-0 [--cell-size:2.8rem]\"\n        />\n      </CardContent>\n      <CardFooter className=\"*:[div]:w-full flex gap-2 border-t px-4 pb-0 pt-4\">\n        <div className=\"flex-1\">\n          <Label htmlFor=\"time-from\" className=\"sr-only\">\n            Start Time\n          </Label>\n          <Input\n            id=\"time-from\"\n            type=\"time\"\n            step=\"1\"\n            defaultValue=\"10:30:00\"\n            className=\"appearance-none [&::-webkit-calendar-picker-indicator]:hidden [&::-webkit-calendar-picker-indicator]:appearance-none\"\n          />\n        </div>\n        <span>-</span>\n        <div className=\"flex-1\">\n          <Label htmlFor=\"time-to\" className=\"sr-only\">\n            End Time\n          </Label>\n          <Input\n            id=\"time-to\"\n            type=\"time\"\n            step=\"1\"\n            defaultValue=\"12:30:00\"\n            className=\"appearance-none [&::-webkit-calendar-picker-indicator]:hidden [&::-webkit-calendar-picker-indicator]:appearance-none\"\n          />\n        </div>\n      </CardFooter>\n    </Card>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-18.json

@@ -0,0 +1,27 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-18",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "Variable size",
+  "registryDependencies": [
+    "calendar"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-18.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\n\nimport { Calendar } from \"@/registry/default/ui/calendar\"\n\nexport default function Calendar18() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Calendar\n      mode=\"single\"\n      selected={date}\n      onSelect={setDate}\n      className=\"rounded-lg border [--cell-size:2.75rem] md:[--cell-size:3rem]\"\n      buttonVariant=\"ghost\"\n    />\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start md:pt-20 justify-center min-w-0 xl:py-24",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}

apps/v4/public/r/styles/default/calendar-19.json

@@ -0,0 +1,33 @@
+{
+  "$schema": "https://ui.shadcn.com/schema/registry-item.json",
+  "name": "calendar-19",
+  "type": "registry:block",
+  "author": "shadcn (https://ui.shadcn.com)",
+  "description": "With presets",
+  "dependencies": [
+    "date-fns"
+  ],
+  "registryDependencies": [
+    "calendar",
+    "card",
+    "input",
+    "label"
+  ],
+  "files": [
+    {
+      "path": "blocks/calendar-19.tsx",
+      "content": "\"use client\"\n\nimport * as React from \"react\"\nimport { addDays } from \"date-fns\"\n\nimport { Button } from \"@/registry/default/ui/button\"\nimport { Calendar } from \"@/registry/default/ui/calendar\"\nimport { Card, CardContent, CardFooter } from \"@/registry/default/ui/card\"\n\nexport default function Calendar19() {\n  const [date, setDate] = React.useState<Date | undefined>(\n    new Date(2025, 5, 12)\n  )\n\n  return (\n    <Card className=\"max-w-[300px] py-4\">\n      <CardContent className=\"px-4\">\n        <Calendar\n          mode=\"single\"\n          selected={date}\n          onSelect={setDate}\n          defaultMonth={date}\n          className=\"bg-transparent p-0 [--cell-size:2.375rem]\"\n        />\n      </CardContent>\n      <CardFooter className=\"flex flex-wrap gap-2 border-t px-4 pb-0 pt-4\">\n        {[\n          { label: \"Today\", value: 0 },\n          { label: \"Tomorrow\", value: 1 },\n          { label: \"In 3 days\", value: 3 },\n          { label: \"In a week\", value: 7 },\n          { label: \"In 2 weeks\", value: 14 },\n        ].map((preset) => (\n          <Button\n            key={preset.value}\n            variant=\"outline\"\n            size=\"sm\"\n            className=\"flex-1\"\n            onClick={() => {\n              const newDate = addDays(new Date(), preset.value)\n              setDate(newDate)\n            }}\n          >\n            {preset.label}\n          </Button>\n        ))}\n      </CardFooter>\n    </Card>\n  )\n}\n",
+      "type": "registry:component",
+      "target": ""
+    }
+  ],
+  "meta": {
+    "iframeHeight": "600px",
+    "container": "w-full bg-surface min-h-svh flex px-6 py-12 items-start justify-center min-w-0",
+    "mobile": "component"
+  },
+  "categories": [
+    "calendar",
+    "date"
+  ]
+}